COPPER ALLOY No. C70600

Alloy Digest ◽  
1991 ◽  
Vol 40 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Copper Alloy ◽  
Service Failure ◽  
Heat Treating ◽  
General Corrosion ◽  
Stress Cracking ◽  
Corrosion Pitting ◽  
Copper Nickel Alloy

Abstract Copper Alloy No. C70600 is a very resistant alloy in a seawater service. Failure in properly designed systems in such environments by general corrosion, pitting, crevice attack and stress-cracking can be discounted for this copper nickel alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-557. Producer or source: Copper and copper alloy mills.

CARLSON ALLOY C625

Alloy Digest ◽  
1992 ◽  
Vol 41 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Fatigue Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
General Corrosion ◽  
Cryogenic Temperatures ◽  
Stress Cracking ◽  
Resistance To Oxidation ◽  
Corrosion Pitting

Abstract CARLSON ALLOY C625 has excellent strength and superior resistance to oxidation at temperatures up to 2000 F. Outstanding resistance to general corrosion, pitting, and stress-cracking in many environments. This alloy has exceptional fatigue strength and toughness at cryogenic temperatures. This datasheet provides information on composition, physical properties, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-409. Producer or source: G.O. Carlson Inc..

COPPER ALLOY No. 962

Alloy Digest ◽  
1976 ◽  
Vol 25 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Copper Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Superior Mechanical Properties ◽  
Copper Nickel Alloy

Abstract Copper Alloy No. 962 is a cast copper-nickel alloy to which about 1.4% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior mechanical properties, weldability and corrosion resistance are needed. It is widely used for such parts as valves and pump bodies that must resist corrosion by seawater. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-319. Producer or source: Copper alloy foundries.

REVERE No. 508

Alloy Digest ◽  
1959 ◽  
Vol 8 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Heat Exchanger ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Feed Water ◽  
Water Heater ◽  
Corrosion Resistant ◽  
Copper Nickel Alloy

Abstract Revere No. 508 is a highly ductile, malleable and corrosion resistant copper-nickel alloy suitable for condenser and heat exchanger tubes and many engineering applications such as salt water piping aboard ship, many components of salt water and fresh water stills, feed water heater tubes and marine coolers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-81. Producer or source: Revere Copper and Brass Inc..

COPPER ALLOY No. C72600

Alloy Digest ◽  
1991 ◽  
Vol 40 (8) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Copper Alloy ◽  
Cold Work ◽  
Heat Treating ◽  
Resistance Welding ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract Copper Alloy No. C72600 is a wrought copper-nickel alloy. It has excellent capacity for cold work and may be readily joined by soldering, brazing, arc and resistance welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fatigue. It also includes information on forming, heat treating, and joining. Filing Code: Cu-563. Producer or source: Copper and copper alloy mills.

MONEL ALLOY 401

Alloy Digest ◽  
1970 ◽  
Vol 19 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Temperature Coefficient ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Heat Treating ◽  
High Electrical Resistance ◽  
Good Corrosion Resistance ◽  
Copper Nickel Alloy

Abstract MONEL alloy 401 is a copper-nickel alloy with high electrical resistance and is used primarily in specialized electrical and electronic applications. It has a negligible temperature coefficient of electrical resistance and good corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: Cu-216. Producer or source: Huntington Alloy Products Division.

ACCURATE METAL

Alloy Digest ◽  
1969 ◽  
Vol 18 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Copper Nickel Alloy

Abstract ACCURATE METAL is a copper-nickel alloy having high strength, ductility and corrosion resistance. It was especially designed for exacting electronic and electrical applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Cu-207. Producer or source: Connecticut Metals Corporation.

DRIVER 180 ALLOY

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Electrical Resistance ◽  
Operating Temperature ◽  
Heat Treating ◽  
Specific Resistivity ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract DRIVER 180 ALLOY is a copper-nickel alloy for use where moderate electrical resistance is required. The number designation refers to its specific resistivity (180 ohms/cir mil/ft) which is combined with a fairly low coefficient of resistance (180 x 10^-6 per C). Its maximum recommended operating temperature is 1000 F. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-348. Producer or source: Wilbur B. Driver Company.

AMPCOLOY 525

Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Salt Water ◽  
Heat Treating ◽  
Chemical Processing ◽  
Copper Nickel Alloy ◽  
Superior Corrosion Resistance

Abstract AMPCOLOY 525 is a cast copper-nickel alloy to which norminally 1.5% iron has been added to increase its resistance to corrosion by salt water. It is recommended where superior corrosion resistance. weldability and mechanical properties are required. Among its many uses are parts that must be resistant to seawater, steam fittings and chemical processing equipment This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-380. Producer or source: Ampco Metal Inc..

OLIN ALLOY C72200

Alloy Digest ◽  
2006 ◽  
Vol 55 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
Erosion Resistance ◽  
Heat Treating ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract Olin Alloy C72200 is a chromium-containing copper-nickel alloy used extensively in seawater. The alloy is used for its corrosion-erosion resistance and is often called Cupronickel with Cr. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-745. Producer or source: Olin Brass.

COPPER ALLOY No. 782

Alloy Digest ◽  
1975 ◽  
Vol 24 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Copper Zinc ◽  
Cold Workability ◽  
Zinc Nickel

Abstract COPPER ALLOY No. 782 is a copper-zinc-nickel alloy with good cold workability, good machinability, excellent strength and good resistance to corrosion. It is used for a variety of industrial and decorative applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-302. Producer or source: Copper and copper alloy mills.

Sign in / Sign up

Export Citation Format

Share Document