NICOMET 2

Alloy Digest ◽  
2000 ◽  
Vol 49 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Spinodal Decomposition ◽  
Copper Alloys ◽  
High Strength ◽  
Heat Treating ◽  
Sleeve Bearing ◽  
Copper Nickel ◽  
Antifriction Properties

Abstract Nicomet 2 is a copper-nickel-tin alloy that has high strength because of spinodal decomposition. The alloy has good antifriction properties. Nicomet 2 could replace some beryllium-copper alloys. An example application for the alloy is a sleeve bearing. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating. Filing Code: CU-653. Producer or source: Anchor Bronze & Metals, Inc.

NICOMET 1

Alloy Digest ◽  
2000 ◽  
Vol 49 (8) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Spinodal Decomposition ◽  
High Strength ◽  
Heat Treating ◽  
Strength Properties ◽  
Typical Application ◽  
Copper Nickel

Abstract Nicomet 1 is a copper-nickel-tin alloy that has high strength because of spinodal decomposition in heat treatment. The alloy could replace aluminum and manganese bronzes. A typical application utilizes both the good antifriction and high strength properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating. Filing Code: CU-652. Producer or source: Anchor Bronze & Metals, Inc.

CUNISIL-837

Alloy Digest ◽  
1961 ◽  
Vol 10 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Alloy ◽  
Copper Nickel ◽  
Nickel Silicon

Abstract Cunisil-837 is a copper-nickel-silicon alloy having high strength and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-104. Producer or source: Anaconda American Brass Company.

KAISER ALUMINUM ALLOY 4026

Alloy Digest ◽  
2003 ◽  
Vol 52 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sliding Friction ◽  
High Strength ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Friction Resistance

Abstract Kaiser Aluminum alloy 4026 has high strength and good wear resistance, as well as galling resistance. It was developed for sliding friction resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: AL-385. Producer or source: Tennalum, A Division of Kaiser Aluminum.

CARPENTER ACUBE 100 ALLOY

Alloy Digest ◽  
2009 ◽  
Vol 58 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Beryllium Copper ◽  
Direct Replacement ◽  
Cobalt Base

Abstract Carpenter ACUBE 100 Alloy is cobalt-base and exhibits corrosion resistance and wear resistance. The alloy was designed as direct replacement of beryllium copper alloys. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion and wear resistance as well as forming, heat treating, and machining. Filing Code: CO-117. Producer or source: Carpenter Specialty Alloys.

BRUSH CASTING ALLOYS 20C and 20CT

Alloy Digest ◽  
1993 ◽  
Vol 42 (1) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Alloying Element ◽  
Fine Grained ◽  
Casting Alloys ◽  
Very High

Abstract BRUSH CASTING ALLOYS 20C AND 20CT are beryllium copper alloys (1.90-2.15% Be) of very high strength with cobalt as the second alloying element (0.35 to 0.70% Co). Use is in the age-hardened temper. Brush casting alloy 20CT is the fine-grained version. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: CU-581. Producer or source: Brush Wellman Inc.

BRUSH CASTING ALLOYS 165C and 165CT

Alloy Digest ◽  
1992 ◽  
Vol 41 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloys ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Alloying Element ◽  
Fine Grained ◽  
Beryllium Copper ◽  
Casting Alloys

Abstract BRUSH CASTING ALLOYS 165C AND 165CT are beryllium copper alloys of high strength with cobalt as the second alloying element (0.20 to 0.65% Co). Use is in the age-hardened temper. Brush casting alloy 165CT is the fine-grained version. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Cu-576. Producer or source: Brush Wellman Inc..

RUUKKI OPTIM 900 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

DOMEX WEAR

Alloy Digest ◽  
2003 ◽  
Vol 52 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Wear Resistant ◽  
Very High

Abstract Domex Wear is a wear-resistant, very-high-strength steel that can be cold formed. It is used in the construction and mining industries. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as heat treating and joining. Filing Code: CS-135. Producer or source: SSAB Swedish Steel Inc.

NICKEL COPPER ALLOYS 505 and 506

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Copper Alloys ◽  
High Strength ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Alloy Casting ◽  
Resistance Alloy ◽  
Nickel Copper

Abstract Nickel-Copper Alloys 505 and 506 are strong castings alloys. Both alloys combine high strength with good wear resistance. Alloy 505 (4% silicon) is employed where exceptional resistance to galling is needed. Alloy 506 (3% silicon) is recommended where good (but not exceptional) galling resistance is sufficient. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion and wear resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-215. Producer or source: Nickel alloy casting producers.

NAK 55

Alloy Digest ◽  
1994 ◽  
Vol 43 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Impact Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Clean Steel ◽  
Very High

Abstract NAK 55 is a very clean steel for use in plastic and rubber molds were impact resistance is not critical in design. Its age-hardening gives very high strength and good wear resistance. Tight tolerance are obtained with consistent expansion and contraction properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: SA-481. Producer or source: International Mold Steels.

Sign in / Sign up

Export Citation Format

Share Document