NICOMET 1

Alloy Digest ◽  
2000 ◽  
Vol 49 (8) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Spinodal Decomposition ◽  
High Strength ◽  
Heat Treating ◽  
Strength Properties ◽  
Typical Application ◽  
Copper Nickel

Abstract Nicomet 1 is a copper-nickel-tin alloy that has high strength because of spinodal decomposition in heat treatment. The alloy could replace aluminum and manganese bronzes. A typical application utilizes both the good antifriction and high strength properties. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating. Filing Code: CU-652. Producer or source: Anchor Bronze & Metals, Inc.

NICOMET 2

Alloy Digest ◽  
2000 ◽  
Vol 49 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Spinodal Decomposition ◽  
Copper Alloys ◽  
High Strength ◽  
Heat Treating ◽  
Sleeve Bearing ◽  
Copper Nickel ◽  
Antifriction Properties

Abstract Nicomet 2 is a copper-nickel-tin alloy that has high strength because of spinodal decomposition. The alloy has good antifriction properties. Nicomet 2 could replace some beryllium-copper alloys. An example application for the alloy is a sleeve bearing. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on wear resistance as well as heat treating. Filing Code: CU-653. Producer or source: Anchor Bronze & Metals, Inc.

COPPER ALLOY No. C72800

Alloy Digest ◽  
1986 ◽  
Vol 35 (4) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Salt Water ◽  
High Strength ◽  
Heat Treating ◽  
Marine Environments ◽  
Copper Nickel

Abstract Copper Alloy No. C72800 is a copper-nickel-tin spinodal alloy designed for high strength and excellent resistance to corrosion by salt water. It can be fabricated by the commonly-used processes. Among its many uses are springs, electrical contracts and relay elements, especially in marine environments and other places where resistance to salt water is required. This revision is being made to correct the section on Heat Treatment (specifically aging) and to expand the section on Corrosion Resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-503. Producer or source: Copper and copper alloy mills. Originally published November 1985, revised April 1986.

CUNISIL-837

Alloy Digest ◽  
1961 ◽  
Vol 10 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Silicon Alloy ◽  
Copper Nickel ◽  
Nickel Silicon

Abstract Cunisil-837 is a copper-nickel-silicon alloy having high strength and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-104. Producer or source: Anaconda American Brass Company.

KAISER ALUMINUM ALLOY 4026

Alloy Digest ◽  
2003 ◽  
Vol 52 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Tensile Properties ◽  
Sliding Friction ◽  
High Strength ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Friction Resistance

Abstract Kaiser Aluminum alloy 4026 has high strength and good wear resistance, as well as galling resistance. It was developed for sliding friction resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating. Filing Code: AL-385. Producer or source: Tennalum, A Division of Kaiser Aluminum.

RUUKKI OPTIM 900 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

DOMEX WEAR

Alloy Digest ◽  
2003 ◽  
Vol 52 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Wear Resistant ◽  
Very High

Abstract Domex Wear is a wear-resistant, very-high-strength steel that can be cold formed. It is used in the construction and mining industries. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as heat treating and joining. Filing Code: CS-135. Producer or source: SSAB Swedish Steel Inc.

ALLEGHENY LUDLUM TYPE 425 MOD

Alloy Digest ◽  
2000 ◽  
Vol 49 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating

Abstract Allegheny Ludlum Type 425 Mod is hardenable by heat treatment. This straight-chromium grade is used where strength, hardness and/or wear resistance need to be combined with corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and machining. Filing Code: SS-806. Producer or source: Allegheny Ludlum Corporation.

NAK 55

Alloy Digest ◽  
1994 ◽  
Vol 43 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Impact Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Clean Steel ◽  
Very High

Abstract NAK 55 is a very clean steel for use in plastic and rubber molds were impact resistance is not critical in design. Its age-hardening gives very high strength and good wear resistance. Tight tolerance are obtained with consistent expansion and contraction properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: SA-481. Producer or source: International Mold Steels.

LO-AIR

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Heavy Duty ◽  
High Carbon

Abstract Lo-Air is a high-carbon alloy steel having air hardening characteristics. It is a deep hardening steel producing a combination of high strength, toughness and wear resistance. It is recommended for precision tools and heavy duty blanking and forming dies. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-154. Producer or source: Cyclops Corporation.

CUPRO NICKEL 30%

Alloy Digest ◽  
1958 ◽  
Vol 7 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Copper Nickel ◽  
Copper Nickel Alloy

Abstract CUPRO-NICKEL 30% is a copper-nickel alloy having high strength, ductility and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-70. Producer or source: American Brass Company.

Sign in / Sign up

Export Citation Format

Share Document