RMI BETA-C

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Tensile Strength ◽  
Base Alloy ◽  
Heat Treating ◽  
Production Equipment ◽  
General Corrosion ◽  
Aged Condition ◽  
Good Resistance ◽  
Solution Treated ◽  
Low Elastic Modulus

Abstract RMI Beta C is a heat-treatable titanium-base alloy that develops a tensile strength of over 200,000 psi in the solution-treated-and-aged condition. It has good ductility and toughness, good fabricability and a low elastic modulus. It has good resistance to general corrosion and it resists hot, aggressive environments containing ferric chloride, sodium chloride, carbon dioxide and hydrogen sulfide. Its applications include coil springs, fasteners, rivets and downhole oil-production equipment. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-87. Producer or source: RMI Company.

SANICRO 71

Alloy Digest ◽  
1965 ◽  
Vol 14 (12) ◽  
Keyword(s):  
Nuclear Power ◽  
Elevated Temperatures ◽  
Power Reactor ◽  
Base Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Nuclear Power Reactor ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Nickel Base

Abstract Sanicro 71 is a nickel-base alloy having good resistance to stress-corrosion, oxidation and creep at elevated temperatures. It is recommended for nuclear power reactor heat exchanger tubes, aircraft turbojet engines and for equipment in the textile, plastic, and chemical industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-108. Producer or source: Sandvik.

COPPER ALLOY No. C44400 and C44500

Alloy Digest ◽  
1994 ◽  
Vol 43 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Copper Alloy ◽  
Heat Treating ◽  
Small Addition ◽  
Good Combination ◽  
General Corrosion ◽  
Good Resistance ◽  
Tin Alloys ◽  
Copper Zinc ◽  
Strength And Ductility

Abstract COPPER ALLOY NOS. C44400 and C44500 are copper-zinc-tin alloys inhibited by antimony and phosphorus, respectively. They are commonly known as inhibited admiralty metal or admiralty brass. They have a good combination of strength and ductility and good resistance to general corrosion. The small addition of inhibitor is made to minimize the alloy’s susceptibility to dezincification and stress corrosion. They are used for condenser, evaporator and heat-exchanger tubes and associated applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CU-599. Producer or source: Copper and copper alloy mills.

AMPCOLOY 83

Alloy Digest ◽  
1976 ◽  
Vol 25 (3) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Precipitation Hardening ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
General Corrosion ◽  
Copper Base ◽  
Resistance To Wear ◽  
Copper Base Alloy

Abstract AMPCOLOY 83 is a wrought copper-base alloy containing nominally 1.8% beryllium. It offers good formability in the unhardened condition and can be strengthened by precipitation hardening. It has a combination of high strength and hardness, good ductility, good electrical and thermal conductivity, excellent resistance to wear and fatigue, and high resistance to general corrosion. Among its many uses are components for resistance welding, bushings and shafts. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-310. Producer or source: Ampco Metal Inc..

BÖHLER L359

Alloy Digest ◽  
2012 ◽  
Vol 61 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Good Resistance ◽  
Temperature Performance ◽  
Excellent Corrosion Resistance ◽  
Resistance To Stress ◽  
Nickel Base

Abstract Böhler (or Boehler) L359 is a nickel-base alloy with good resistance to stress-corrosion cracking, and excellent corrosion resistance to all types of nonuniform corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: Ni-700. Producer or source: Böhler-Uddeholm North America.

AMPCO 483

Alloy Digest ◽  
1978 ◽  
Vol 27 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Base Alloy ◽  
High Hardness ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Copper Base ◽  
Copper Base Alloy

Abstract AMPCO 483 is a copper-base alloy that can be used in the cast or wrought form. It provides high strength, high hardness, excellent resistance to corrosion and good resistance to fatigue and wear. It is well suited for service at temperatures up to 750 F and for applications such as pickling equipment, nuts and marine hardware. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-352. Producer or source: Ampco Metal Inc..

AMDRY 755

Alloy Digest ◽  
1974 ◽  
Vol 23 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Powder Metal ◽  
Good Resistance ◽  
Temperature Performance ◽  
Nickel Base

Abstract AMDRY 755 is a nickel-base alloy designed to provide good resistance to combinations of abrasion, corrosion, impact, heat and oxidation. The alloy has good machinability characteristics and is easier to machine than AMDRY 756. It is deposited by spraying on the desired surface at a thickness usually limited to a maximum of 0.080 inch. The data pertain to the deposit after fusing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and powder metal forms. Filing Code: Ni-204. Producer or source: Alloy Metals Inc..

AMDRY 754

Alloy Digest ◽  
1974 ◽  
Vol 23 (1) ◽  
Keyword(s):  
Compressive Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Powder Metal ◽  
Good Resistance ◽  
Temperature Performance ◽  
Nickel Base

Abstract AMDRY 754 is a nickel-base alloy formulated to provide good resistance to combinations of abrasion, corrosion, heat, impact shock and oxidation. It is deposited by spraying on the desired surface at a thickness usually limited to a maximum of 0.080 inch. Properties are on the deposit. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and powder metal forms. Filing Code: Ni-199. Producer or source: Alloy Metals Inc..

MUELLER ALLOY 6732

Alloy Digest ◽  
1984 ◽  
Vol 33 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Base Alloy ◽  
Heat Treating ◽  
Soft Or ◽  
Good Resistance ◽  
Copper Base ◽  
Screw Machine ◽  
Copper Base Alloy ◽  
Machine Work

Abstract MUELLER Alloy 6732 is a free-machining high-leaded copper-base alloy that is especially well suited for screw machine work. It can be used with hard or soft mating members. It can be joined readily by soft or silver soldering. It possesses excellent bearing properties, high mechanical properties and good resistance to corrosion. Its uses include bushings gears, bearings and pump parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-481. Producer or source: Mueller Brass Company.

NICROFER 7216 H

Alloy Digest ◽  
1997 ◽  
Vol 46 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Iron Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Nickel Chromium ◽  
Solution Treated ◽  
Resistance To Oxidation ◽  
Resistance To Stress

Abstract Nicrofer 7216 H is a solution-treated nickel-chromium-iron alloy with good resistance to oxidation, carburization, and nitriding; good resistance to stress-corrosion cracking; and good resistance to dry chlorine and hydrogen chloride. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-520. Producer or source: VDM Technologies Corporation.

UDIMET 718

Alloy Digest ◽  
1978 ◽  
Vol 27 (11) ◽  
Keyword(s):  
Gas Turbines ◽  
Base Alloy ◽  
Heat Treating ◽  
High Yield ◽  
Nickel Base Alloy ◽  
Aged Condition ◽  
High Yield Strength ◽  
Unusual Combination ◽  
Critical Components ◽  
Nickel Base

Abstract UDIMET 718 is a nickel-base alloy that is precipitation hardenable. It exhibits exceptionally high yield strength up to 1300 F, excellent cryogenic properties down to -423 F and superior weldability even in the fully-aged condition. This unusual combination of characteristics makes it suitable for elevated-temperature applications in gas turbines and in critical components for missiles. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-258. Producer or source: Special Metals Corporation.

Sign in / Sign up

Export Citation Format

Share Document