UHB SVERKER 21

Alloy Digest ◽  
1979 ◽  
Vol 28 (11) ◽  
Keyword(s):  
Compressive Strength ◽  
Cold Work ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
High Hardenability ◽  
Wide Range ◽  
Shock Resistance ◽  
Cold Work Tool Steel ◽  
Excellent Stability

Abstract UHB SVERKER 21 is a high-carbon, high-chromium cold-work tool steel alloyed with molybdenum and vanadium. It has high hardenability and high surface hardness after hardening. It has excellent wear resistance and high compressive strength along with moderate toughness (shock resistance). This steel also is characterized by excellent stability (safety) in hardening and good resistance to tempering. Its many applications include a wide range of cold-working dies, cold-heading tools, gages, knurling tools and shears. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating and machining. Filing Code: TS-356. Producer or source: Uddeholm Steel Corporation.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2067

Alloy Digest ◽  
2020 ◽  
Vol 69 (2) ◽  
Keyword(s):  
Cold Work ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Dimensional Changes ◽  
Short Run ◽  
Quench Hardening ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2067 is a high-carbon, 1.5% chromium, alloy cold-work tool steel. In view of its higher hardenability than that of the non-alloy, water-hardening, cold work tool steels, this steel can be oil quenched, a factor that minimizes dimensional changes during quench hardening. Cryodur 2067 is suitable for short run tooling in applications requiring high surface hardness. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-786. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

UHB RIGOR A2

Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
High Dimensional ◽  
Metal Working ◽  
Good Resistance ◽  
High Hardenability ◽  
Compression Resistance

Abstract UHB RIGOR AR is a chromium-molybdenum-vanadium tool steel characterized by high surface hardness, high hardenability, high dimensional stability after hardening and tempering, high compression resistance, good machinability, good resistance to tempering and good wear resistance. Its many uses include metal-working tools, dies for porcelain and gages. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-315. Producer or source: Uddeholm Aktiebolag.

ARNE

Alloy Digest ◽  
1985 ◽  
Vol 34 (2) ◽  
Keyword(s):  
Cold Work ◽  
High Surface ◽  
Surface Hardness ◽  
Heat Treating ◽  
General Purpose ◽  
Good Tool ◽  
Wide Range ◽  
High Production ◽  
Forming Tools ◽  
Tungsten Steel

Abstract ARNE is a general-purpose, oil-hardening tool steel. It is a versatile manganese-chromium-tungsten steel suitable for a wide variety of cold-work applications. Its main characteristics include: (1) Good machinability, (2) Good dimensional stability in hardening and (3) A good combination of high surface hardness and toughness after hardening and tempering. These characteristics combine to give a steel suitable for the manufacture of tooling with good tool life and high production economy. ARNE is used for a wide range of cutting and forming tools. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-436. Producer or source: Uddeholm Steel Corporation.

THYRODUR 2767/2767 SUPRA

Alloy Digest ◽  
2007 ◽  
Vol 56 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
High Hardenability ◽  
Cold Work Tool Steel

Abstract Thyrodur 2767/2767 Supra is a cold-work tool steel with high hardenability for punching tools. Thyrodur 2767 Supra is the electroslag remelted version. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating. Filing Code: TS-651. Producer or source: Schmolz + Bickenbach USA Inc.

TOUGHTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Cold Work Tool Steel

Abstract Toughtec SF is a spray-formed cold-work tool steel offering a combination of high wear resistance and very good ductility. Toughtec SF is suitable for the production of hot shearing dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-648. Producer or source: Böhler-Uddeholm North America.

UDDEHOLM SVERKER 3

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Abrasive Wear ◽  
Cold Work ◽  
Heat Treating ◽  
Abrasive Wear Resistance ◽  
Tungsten Alloy ◽  
High Carbon ◽  
Long Run ◽  
Cold Work Tool Steel

Abstract Uddeholm Sverker 3 is a high-carbon, chromium-tungsten, alloy cold-work tool steel. It is suitable for medium and long run tooling in applications where a very good abrasive wear resistance is needed. Uddeholm Sverker 3 contains large carbides, which are advantageous for abrasive wear resistance but which reduce chipping resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating. Filing Code: TS-797. Producer or Source: Uddeholms AB.

ROLTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
North America ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Good Resistance ◽  
Cold Work Tool Steel

Abstract Roltec SF is a spray formed cold-work tool steel offering a combination of high wear resistance and very good resistance to chipping and cracking. Roltec SF is suitable for the production of rolls and slitter knives. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-644. Producer or source: Böhler-Uddeholm North America.

AL TECH HURON

Alloy Digest ◽  
1987 ◽  
Vol 36 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Tool Steel ◽  
High Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
Cold Forming ◽  
Resistance To Wear ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract AL TECH HURON is a cold-work tool steel developed for applications requiring high resistance to wear or to abrasion and for resistance to heavy pressure rather than to sudden shock. Because of these qualities and its good nondeforming properties, it is unsurpassed (for an oil-hardening tool steel) for die work on long production runs. It has superior depth of hardening. Its many applications include cold trimmer dies, lamination dies, plug gages, slitting cutters and blanking, stamping and cold-forming dies and punches for long runs. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-481. Producer or source: AL Tech Specialty Steel Corporation.

UHB S7

Alloy Digest ◽  
1979 ◽  
Vol 28 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Shock ◽  
Heat Treating ◽  
High Hardenability ◽  
Wide Range

Abstract UHB-S7 is a tool steel characterized by its high hardenability and excellent impact properties. At Rockwell C 59 it has a compressive strength of over 600,000 psi, a tensile strength of 340,000 psi, and a Charpy (no notch, smooth) impact value of more that 140 foot-pounds. It is suitable for a wide range of tool and die work for both hot-shock and cold-shock applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-350. Producer or source: Uddeholm Aktiebolag.

INDUSTEEL TENASTEEL

Alloy Digest ◽  
2020 ◽  
Vol 69 (6) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Vanadium Alloy ◽  
Tool Steels ◽  
High Carbon ◽  
Cold Work Tool Steel

Abstract Industeel Tenasteel is a high-carbon, chromium-molybdenum-vanadium, alloy cold-work tool steel that is specially designed to replace Type D2 and X153CrMoV12 (1.2379) cold work tool steels in applications requiring high wear resistance and very good toughness. This datasheet provides information on composition, physical properties, elasticity, and compressive strength. It also includes information on heat treating. Filing Code: TS-795. Producer or source: Industeel France (a subsidiary of ArcelorMittal).

Sign in / Sign up

Export Citation Format

Share Document