UDDEHOLM UHB 11

Alloy Digest ◽  
2021 ◽  
Vol 70 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Cold Work Tool Steel

Abstract Uddeholm UHB 11 is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heat-treated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability, Uddeholm UHB 11 develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: TS-814. Producer or source: Uddeholms AB.

LUCEFIN GROUP C45U (1.1730)

Alloy Digest ◽  
2020 ◽  
Vol 69 (1) ◽  
Keyword(s):  
High Temperature ◽  
Cold Work ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Temperature Performance ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Cold Work Tool Steel

Abstract Lucefin Group C45U is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heat-treated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability, C45U develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming and joining. Filing Code: TS-784. Producer or source: Lucefin S.p.A.

DEUTSCHE EDELSTAHLWERKE CRYODUR 1730

Alloy Digest ◽  
2021 ◽  
Vol 70 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 1730 is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heattreated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability Cryodur 1730 develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: TS-808. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

UDDEHOLM FORMAX

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Low Carbon ◽  
High Manganese ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Cold Work Tool Steel ◽  
Hardened Condition

Abstract Uddeholm Formax is a high-manganese, low-carbon, non-alloy cold work tool steel that is primarily used in the non-heat-treated condition. For special applications it is used in the case-hardened condition. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: TS-793. Producer or source: Uddeholms AB.

CARPENTER No. 5-317

Alloy Digest ◽  
1955 ◽  
Vol 4 (2) ◽  
Keyword(s):  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Nickel Chromium ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition

Abstract CARPENTER No. 5-317 is a nickel-chromium medium carbon steel for high combination of hardness and toughness in heat treated condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-27. Producer or source: Carpenter.

UNS A96101

Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Electrical Conductivity ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition

Abstract UNS NO. A96101 in the heat treated condition is used primarily for enclosed bus conductor where both high strength and high electrical conductivity are desirable. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-287. Producer or source: Various aluminum companies.

MAXEL 3 1/2

Alloy Digest ◽  
1971 ◽  
Vol 20 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Brinell Hardness ◽  
Heat Treating ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Specialty Metals

Abstract MAXEL 3 1/2 is a free-machining alloy steel that provides an outstanding combination of heat-treated properties and superior machinability. It can be supplied in the heat-treated condition at 262-311 Brinell hardness. See also MAX-EL 3 1/2, Alloy Digest SA-45, July 1956. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: SA-262. Producer or source: Crucible Specialty Metals Division, Colt Industries.

UDDEHOLM VIKING

Alloy Digest ◽  
2021 ◽  
Vol 70 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Vanadium Alloy ◽  
Heavy Duty ◽  
Medium Carbon ◽  
Cold Work Tool Steel

Abstract Uddeholm Viking is a medium-carbon, chromium-molybdenum-vanadium, alloy cold-work tool steel that is characterized by an excellent combination of wear resistance and toughness required for chipper-knives and for heavy-duty blanking and forming. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and surface treatment. Filing Code: TS-807. Producer or source: Uddeholms AB (a voestalpine company).

DEUTSCHE EDELSTAHLWERKE CRYODUR 2242

Alloy Digest ◽  
2021 ◽  
Vol 70 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Vanadium Alloy ◽  
Medium Carbon ◽  
High Toughness ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2242 is a medium-carbon, chromium-vanadium alloy cold-work tool steel that has medium hardenability and is suitable for applications requiring a combination of high strength, high toughness, and good wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-816. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

REPUBLIC HP 150

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Heavy Plate ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition

Abstract Republic HP150 is an alloy steel designed to give 150,000 psi yield strength with exceptional toughness. The alloy is intended for fabrication in the heat treated condition principally for heavy plate sections. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-170. Producer or source: Republic Steel Corporation.

AISI 6150

Alloy Digest ◽  
1955 ◽  
Vol 4 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Impact Resistance ◽  
Heat Treating ◽  
Steel Mills ◽  
Treated Condition ◽  
Heat Treated ◽  
High Fatigue ◽  
Heat Treated Condition

Abstract AISI 6150 is a tough, shock resisting, shallow-hardening chromium-vanadium steel. It has high fatigue and impact resistance in the heat treated condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: SA-26. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document