LUCEFIN GROUP C45U (1.1730)

Alloy Digest ◽  
2020 ◽  
Vol 69 (1) ◽  
Keyword(s):  
High Temperature ◽  
Cold Work ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Temperature Performance ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Cold Work Tool Steel

Abstract Lucefin Group C45U is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heat-treated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability, C45U develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming and joining. Filing Code: TS-784. Producer or source: Lucefin S.p.A.

UDDEHOLM UHB 11

Alloy Digest ◽  
2021 ◽  
Vol 70 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Cold Work Tool Steel

Abstract Uddeholm UHB 11 is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heat-treated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability, Uddeholm UHB 11 develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: TS-814. Producer or source: Uddeholms AB.

UNS G61200

Alloy Digest ◽  
1991 ◽  
Vol 40 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Heat Treating ◽  
Case Hardening ◽  
Steel Mills ◽  
Temperature Performance ◽  
Treated Condition ◽  
Heat Treated ◽  
High Fatigue ◽  
Heat Treated Condition

Abstract UNS G62100 is a tough, shock resisting, case-hardening chromium-vanadium steel. It has high fatigue resistance in the heat treated condition. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-458. Producer or source: Alloy steel mills and foundries.

DEUTSCHE EDELSTAHLWERKE CRYODUR 1730

Alloy Digest ◽  
2021 ◽  
Vol 70 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 1730 is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heattreated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability Cryodur 1730 develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: TS-808. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

UDDEHOLM FORMAX

Alloy Digest ◽  
2020 ◽  
Vol 69 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Low Carbon ◽  
High Manganese ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Cold Work Tool Steel ◽  
Hardened Condition

Abstract Uddeholm Formax is a high-manganese, low-carbon, non-alloy cold work tool steel that is primarily used in the non-heat-treated condition. For special applications it is used in the case-hardened condition. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on forming, heat treating, and joining. Filing Code: TS-793. Producer or source: Uddeholms AB.

DUREHETE 950

Alloy Digest ◽  
2005 ◽  
Vol 54 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Power Plant ◽  
High Strength Steel ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition

Abstract Durehete 950 is a high-strength steel bolting material often used in steam turbine and other power plant applications. It is usually supplied in the heat treated condition. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness, creep, and deformation. It also includes information on high temperature performance as well as forming and heat treating. Filing Code: SA-145. Producer or source: Corus Products USA. Originally published May 1963, revised October 2005.

HITACHI METALS SLD-MAGIC

Alloy Digest ◽  
2020 ◽  
Vol 69 (10) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
High Performance ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Performance ◽  
Mold Fabrication ◽  
Cold Work Tool Steel

Abstract Hitachi Metals SLD-Magic is a high-performance alloy cold-work tool steel that is characterized by improved mold lifespan and easy mold fabrication. This datasheet provides information on composition, physical properties, hardness, elasticity as well as fatigue. It also includes information on low and high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-802. Producer or source: Hitachi Metals Ltd.

Effect of Mo Addition on Room and High Temperature Tensile Behavior of Al-Si-Cu-Mg Alloy in As-Cast and Heat-Treated Conditions

2019 ◽  
Vol 1155 ◽  
pp. 71-79
Author(s):  
Mohammadreza Zamani ◽  
Stefania Toschi ◽  
Alessandro Morri ◽  
Lorella Ceschini ◽  
Salem Seifeddine
Keyword(s):  
High Temperature ◽  
Tensile Behavior ◽  
Mg Alloy ◽  
High Melting Point ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
High Temperature Tensile ◽  
Negligible Influence

This study focuses on the role of Mo addition on the mechanical properties of an Al-Si-Cu-Mg alloy in as-cast and heat-treated condition at ambient and elevated temperature. Addition of 0.4 to 0.6 wt.% Mo forms Mo-bearing dispersoid particles which have a relatively high melting point and improve high temperature tensile strength. Ductility suffered in the presence of Mo-bearing particles. Trace addition of Mo up to 0.6 wt.% has a negligible influence on the yield strength and hardness of Al-Si-Cu-Mg alloy in as-cast and heat-treated conditions at ambient temperature and 250 °C.

NIMOCAST 80

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Diesel Engine ◽  
Physical Properties ◽  
Heat Treating ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
High Temperature Components

Abstract NIMOCAST Alloy 80 is the casting counterpart of NIMONIC Alloy 80A (Alloy Digest Ni-10, May 1954). It may be used as as cast but develops optimum mechanical properties in the fully heat treated condition. NIMOCAST Alloy 80 is used for diesel engine precombustion chambers and for other high-temperature components. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Ni-334. Producer or source: Inco Alloys International Inc..

DOWMETAL AZ91C

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Base Alloy ◽  
Heat Treating ◽  
Permanent Mold ◽  
Aged Condition ◽  
Chemical Company ◽  
Temperature Performance ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Permanent Mold Castings

Abstract DOWMETAL AZ91C is a heat treatable magnesium base alloy suitable for sand and permanent mold castings. It combines good tensile strength and yield strength with good elongation and is used in both the solution heat treated condition (T4) and in the solution heat treated plus artificially aged condition (T6). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Mg-25. Producer or source: The Dow Chemical Company, Bay City Division.

ALUMINUM 142

Alloy Digest ◽  
1955 ◽  
Vol 4 (12) ◽  
Keyword(s):  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Aluminum Casting ◽  
Aluminum Casting Alloy ◽  
Temperature Performance ◽  
Aluminum Company ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition

Abstract ALUMINUM 142 is a heat treatable aluminum casting alloy recommended for services at elevated temperatures. It has high strength and good wear resistance in the fully heat treated condition. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-35. Producer or source: Aluminum Company of America.

Sign in / Sign up

Export Citation Format

Share Document