Evaluation of Driver Car-Following Behavior Models for Cooperative Adaptive Cruise Control Systems

2017 ◽  
Vol 2622 (1) ◽  
pp. 84-95 ◽  
Author(s):  
Mizanur Rahman ◽  
Mashrur Chowdhury ◽  
Kakan Dey ◽  
M. Rafiul Islam ◽  
Taufiquar Khan
Keyword(s):  
Vehicle Dynamics ◽  
Adaptive Cruise Control ◽  
User Acceptance ◽  
Evaluation Framework ◽  
Cruise Control ◽  
String Stability ◽  
Maximum Acceleration ◽  
Car Following ◽  
Cooperative Adaptive Cruise Control ◽  
Behavior Models

A cooperative adaptive cruise control (CACC) system targeted to obtain a high level of user acceptance must replicate the driving experience in each CACC vehicle without compromising the occupant’s comfort. “User acceptance” can be defined as the safety and comfort of the occupant in the CACC vehicle in terms of acceptable vehicle dynamics (i.e., the maximum acceleration or deceleration) and string stability (i.e., the fluctuations in the vehicle’s position, speed, and acceleration). The primary objective of this study was to develop an evaluation framework for the application of a driver car-following behavior model in CACC system design to ensure user acceptance in terms of vehicle dynamics and string stability. The authors adopted two widely used driver car-following behavior models, ( a) the optimum velocity model (OVM) and ( b) the intelligent driver model (IDM), to prove the efficacy of the evaluation framework developed in this research for CACC system design. A platoon of six vehicles was simulated for three traffic flow states (uniform speed, speed with constant acceleration, and speed with constant deceleration) with different acceleration and deceleration rates. The maximum acceleration or deceleration and the sum of the squares of the errors of the follower vehicle speed were measured to evaluate user acceptance in terms of vehicle dynamics and string stability. Analysis of the simulation results revealed that the OVM performed better at modeling a CACC system than did the IDM in terms of acceptable vehicle dynamics and string stability.

scholarly journals The Research of Car-Following Model Based on Real-Time Maximum Deceleration

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Longhai Yang ◽  
Xiqiao Zhang ◽  
Jiekun Gong ◽  
Juntao Liu
Keyword(s):  
Real Time ◽  
Vehicle Dynamics ◽  
Driver Model ◽  
Cruise Control ◽  
Maximum Acceleration ◽  
Car Following ◽  
Time Headway ◽  
Asphalt Road ◽  
Car Following Model ◽  
Maximum Deceleration

This paper is concerned with the effect of real-time maximum deceleration in car-following. The real-time maximum acceleration is estimated with vehicle dynamics. It is known that an intelligent driver model (IDM) can control adaptive cruise control (ACC) well. The disadvantages of IDM at high and constant speed are analyzed. A new car-following model which is applied to ACC is established accordingly to modify the desired minimum gap and structure of the IDM. We simulated the new car-following model and IDM under two different kinds of road conditions. In the first, the vehicles drive on a single road, taking dry asphalt road as the example in this paper. In the second, vehicles drive onto a different road, and this paper analyzed the situation in which vehicles drive from a dry asphalt road onto an icy road. From the simulation, we found that the new car-following model can not only ensure driving security and comfort but also control the steady driving of the vehicle with a smaller time headway than IDM.

Smooth-Switching Control-Based Cooperative Adaptive Cruise Control by Considering Dynamic Information Flow Topology

2020 ◽  
Vol 2674 (4) ◽  
pp. 444-458
Author(s):  
Anye Zhou ◽  
Siyuan Gong ◽  
Chaojie Wang ◽  
Srinivas Peeta
Keyword(s):  
Information Flow ◽  
Adaptive Cruise Control ◽  
Switching Control ◽  
Cruise Control ◽  
Flow Topology ◽  
Dynamic Information ◽  
String Stability ◽  
Kalman Predictor ◽  
Cooperative Adaptive Cruise Control ◽  
Smooth Switching

Vehicle-to-vehicle communications can be unreliable because of interference and information congestion, which leads to the dynamic information flow topology (IFT) in a platoon of connected and autonomous vehicles. Some existing studies adaptively switch the controller of cooperative adaptive cruise control (CACC) to optimize string stability when IFT varies. However, the difference of transient response between controllers can induce uncomfortable jerks at switching instances, significantly affecting riding comfort and jeopardizing vehicle powertrain. To improve riding comfort while maintaining string stability, the authors introduce a smooth-switching control-based CACC scheme with IFT optimization (CACC-SOIFT) by implementing a bi-layer optimization model and a Kalman predictor. The first optimization layer balances the probability of communication failure and control performance optimally, generating a robust IFT to reduce controller switching. The second optimization layer adjusts the controller parameters to minimize tracking error and the undesired jerk. Further, a Kalman predictor is applied to predict vehicle acceleration if communication failures occur. It is also used to estimate the states of preceding vehicles to suppress the measurement noise and the acceleration disturbance. The effectiveness of the proposed CACC-SOIFT is validated through numerical experiments based on NGSIM field data. Results indicate that the CACC-SOIFT framework can guarantee string stability and riding comfort in the environment of dynamic IFT.

Human-Aware Autonomous Control for Cooperative Adaptive Cruise Control (CACC) Systems

2015 ◽  
Author(s):  
Xujie Wang ◽  
Yue Wang
Keyword(s):  
Adaptive Cruise Control ◽  
Controller Design ◽  
Cruise Control ◽  
String Stability ◽  
Driving Experience ◽  
Traffic Efficiency ◽  
Cooperative Adaptive Cruise Control ◽  
Human Driver ◽  
Driving Assistance ◽  
System Controller

This paper discusses the design of a human-aware cooperative adaptive cruise control (CACC) system that (i) takes into account driver comfort in autonomous cruise control, and (ii) provides assistive corrections to avoid driver errors. To incorporate driver characteristics into system controller design, two self-learning algorithms are used to estimate driver’s preferred time headway. We then develop a human-like blending control for CACC based on a model predictive control (MPC)-type method, which integrates the driver comfort, traffic efficiency, and fuel economy criteria. Furthermore, a driving assistance controller is developed to help human driver to maintain string stability in platoon. Simulation results show that (i) the human-like CACC design can significantly improve driving experience, and (ii) with the help of the assistive controller, string stability is satisfied for both exclusively autonomous CACC and when the CACC switches to manual driving in a platoon.

Fuel consumptions and exhaust emissions induced by cooperative adaptive cruise control strategies

2015 ◽  
Vol 29 (14) ◽  
pp. 1550084 ◽  
Author(s):  
Shaowei Yu ◽  
Zhongke Shi
Keyword(s):  
Adaptive Cruise Control ◽  
Control Strategies ◽  
Exhaust Emissions ◽  
Cruise Control ◽  
Difference Model ◽  
Velocity Difference ◽  
Car Following ◽  
Road Traffic Safety ◽  
Cooperative Adaptive Cruise Control ◽  
Car Following Model

Many cooperative adaptive cruise control strategies have been presented to improve traffic efficiency as well as road traffic safety, but scholars have rarely explored the impacts of these strategies on cars' fuel consumptions and exhaust emissions. In this paper, we respectively select two-velocity difference model, multiple velocity difference model and the car-following model considering multiple preceding cars' accelerations to investigate each car's fuel consumptions, carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxides ( NO X ) emissions and carry out comparative analysis. The comparisons of fuel consumptions and exhaust emissions in three different cruise control strategies show that cooperative cars simulated by the car-following model considering multiple preceding cars' accelerations can run with the minimal fuel consumptions, CO, HC and NO X emissions, thus, taking the car-following model considering multiple preceding cars' accelerations as the cooperative adaptive cruise control strategy can significantly improve cars' fuel efficiency and exhaust emissions.

Sign in / Sign up

Export Citation Format

Share Document