Synthesis and properties of double gadolinium tellurites

2021 ◽  
Vol 103 (3) ◽  
pp. 67-73
Author(s):  
A.A. Toibek ◽  
◽  
K.T. Rustembekov ◽  
D.A. Kaikenov ◽  
M. Stoev ◽  
...  
Keyword(s):  
Phase Analysis ◽  
Solid Phase ◽  
Heat Capacities ◽  
Ceramic Technology ◽  
Phase Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Temperature Range ◽  
Diffraction Patterns

For the first time, double gadolinium tellurites of the composition GdMIITeO4.5 (MII — Sr, Ba) were synthesized by the solid-phase method. The solid-phase synthesis of samples was carried out from decrepitated gadolinium (III) and tellurium (IV) oxides, strontium, and barium carbonates according to the standard ceramic technology. The synthesis was carried out in the temperature range of 800-1100 °C. The samples obtained were confirmed by X-ray phase analysis. X-ray phase analysis was carried out on an Empyrean instrument in the XRDML Pananalitical format. The intensity of the diffraction maxima was estimated on a 100-point scale. X-ray diffraction patterns indexing of the powder of gadolinium tellurites — alkaline earth metals studied were carried out by the homology method. The reliability and correctness of the results of indexing the X-ray diffraction patterns are confirmed by the good agreement between the experimental and calculated values of the interplanar distances (d) and the agreement between the values of the X-ray and pycnometric densities. It was found that compounds GdSrTeO4.5 and GdBaTeO4.5 crystallize in the monoclinic system and have the unit cell parameters, namely GdSrTeO4.5 — a = 12.7610, b = 10.4289, c = 8.6235 Å, V° = 1141.83 Å3, β = 95.77°, Z = 5, ρrent. = 3.22, ρpikn. = (3.10±0.09) g/cm3; GdBaTeO4.5 — a = 15.7272, b = 15.8351, c = 7.1393 Å, V° = 1769.72 Å3, β = 95.53°, Z = 8, ρrent = 3.71, ρpick = (3.61±0.10) g/cm3. Using the Landiya method, the standard heat capacities of the compounds were estimated from the calculated values of the standard entropies, and the temperature dependences of the heat capacities of the gadolinium tellurites synthesized were determined in the temperature range of 298–850 K.

X-ray diffraction patterns for BaR2PdO5 (R=Nd, Sm, Eu, and Gd)

1996 ◽  
Vol 11 (1) ◽  
pp. 9-12
Author(s):  
W. Wong-Ng
Keyword(s):  
Materials Characterization ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray ◽  
Cell Parameters ◽  
Diffraction Patterns ◽  
The Eu

Calculated patterns for the BaR2PdO5 series, in which X is Pd and R=Nd, Sm, Eu, or Gd, have been prepared for materials characterization until experimental patterns can be determined. These compounds are isostructural to the superconductor related “brown phases” BaLa2CuO5 and BaNd2CuO5, which are tetragonal with space group P4/mbm, Z=4. The cell parameters of the Eu and Gd compounds were derived from the La and Nd analogs. The calculated patterns of these four compounds compared well to an experimental pattern of BaNd2CuO5.

scholarly journals Bi3+ and Eu3+ Activated Luminescent Behaviors in Non-Stoichiometric LaO0.65F1.7 Structure

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2326
Author(s):  
Sungjun Yang ◽  
Sangmoon Park
Keyword(s):  
Optical Materials ◽  
Emission Spectra ◽  
Lattice Energy ◽  
Host Lattice ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Diffraction Patterns ◽  
Cation Sites

Optical materials composed of La1-p-qBipEuqO0.65F1.7 (p = 0.001–0.05, q = 0–0.1) were prepared via a solid-state reaction using La(Bi,Eu)2O3 and NH4F precursors at 1050 °C for two hours. X-ray diffraction patterns of the phosphors were obtained permitting the calculation of unit-cell parameters. The two La3+ cation sites were clearly distinguished by exploiting the photoluminescence excitation and emission spectra through Bi3+ and Eu3+ transitions in the non-stoichiometric host lattice. Energy transfer from Bi3+ to Eu3+ upon excitation with 286 nm radiation and its mechanism in the Bi3+- and Eu3+-doped host structures is discussed. The desired Commission Internationale de l’Eclairage values, including emissions in blue-green, white, and red wavelength regions, were obtained from the Bi3+- and Eu3+-doped LaO0.65F1.7 phosphors.

X-Ray Diffraction Intensity of Oxife Soild Soultions: Application to Qualitative and Quantitative Phase Analysis

1982 ◽  
Vol 26 ◽  
pp. 119-128 ◽  
Author(s):  
Ronald C. Gehringer ◽  
Gregory J. McCarthy ◽  
R.G. Garvey ◽  
Deane K. Smith
Keyword(s):  
Phase Analysis ◽  
Solid Solutions ◽  
Inorganic Materials ◽  
Quantitative Phase Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Qualitative And Quantitative ◽  
Quantitative Analyses ◽  
End Members

Solid solutions are pervasive in minerals and in industrial inorganic materials. The analyst is often called upon to provide qualitative and quantitative X-ray phase analysis for specimens containing solid solutions when all that is available are Powder Diffraction File (PDF) data or commercial standards for the end members. In an earlier paper (1) we presented several examples of substantial errors in accuracy of quantitative analysis that can arise when the crystallinity and composition of the analyte standard do not match those of the analyte in the sample of interest. We recommended that to obtain more accurate quantitative analyses, one should determine the analyte composition (e.g., from XRF on grains seen in a SEM or from comparison of cell parameters with those of the end members) and synthesize an analyte standard with this composition and with a crystallinity approximating that of the analyte (e.g., as determined from peak breadth or α1/ α2 splitting).

A conformational polymorphic transition in the high-temperature ∊-form of chlorpropamide on cooling: a new ∊′-form

2009 ◽  
Vol 65 (6) ◽  
pp. 770-781 ◽  
Author(s):  
Tatiana N. Drebushchak ◽  
Yury A. Chesalov ◽  
Elena V. Boldyreva
Keyword(s):  
Phase Transition ◽  
High Temperature ◽  
Structural Changes ◽  
Molecular Conformation ◽  
Polymorphic Transition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Temperature Range ◽  
Two Phases

Structural changes in the high-temperature ∊-polymorph of chlorpropamide, 4-chloro-N-(propylaminocarbonyl)benzenesulfonamide, C10H13ClN2O3S, on cooling down to 100 K and on reverse heating were followed by single-crystal X-ray diffraction. At temperatures below 200 K the phase transition into a new polymorph (termed the ∊′-form) has been observed for the first time. The polymorphic transition preserves the space group Pna21, is reversible and is accompanied by discontinuous changes in the cell volume and parameters, resulting from changes in molecular conformation. As shown by IR spectroscopy and X-ray powder diffraction, the phase transition in a powder sample is inhomogeneous throughout the bulk, and the two phases co-exist in a wide temperature range. The cell parameters and the molecular conformation in the new polymorph are close to those in the previously known α-polymorph, but the packing of the z-shaped molecular ribbons linked by hydrogen bonds inherits that of the ∊-form and is different from the packing in the α-polymorph. A structural study of the α-polymorph in the same temperature range has revealed no phase transitions.

scholarly journals Interlayer Structure of Bioactive Molecule, 2-Aminoethanesulfonate, Intercalated into Calcium-Containing Layered Double Hydroxides

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Tae-Hyun Kim ◽  
Hyoung Jun Kim ◽  
Jae-Min Oh
Keyword(s):  
Layered Double Hydroxides ◽  
Solid Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Calcium Cation ◽  
Particle Size And Morphology ◽  
Interlayer Structure ◽  
Diffraction Patterns ◽  
Size And Morphology ◽  
Double Hydroxides

We have successfully intercalated 2-aminoethanesulfonate, a well-known biomolecule taurine, into calcium-containing layered double hydroxides via optimized solid phase intercalation. According to X-ray diffraction patterns and infrared spectroscopy, it was revealed that the intercalated taurine molecules were each directly coordinated to other calcium cation and arranged in a zig-zag pattern. Scanning electron microscopy showed that the particle size and morphology of the LDHs were not affected by the solid phase intercalation, and the surface of intercalates was covered by organic moieties. From ninhydrin amine detection tests, we confirmed that most of the taurine molecules were well stabilized between the calcium-containing LDH layers.

Preparation of Exfoliated Polyethylene/Clay Nanocomposites at High Clay Content

2010 ◽  
Vol 150-151 ◽  
pp. 561-564
Author(s):  
Hao Qun Hong ◽  
Hai Yan Zhang ◽  
Hui He ◽  
De Min Jia
Keyword(s):  
Solid Phase ◽  
Clay Content ◽  
Layered Silicates ◽  
Clay Nanocomposites ◽  
Melt Blending ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
High Polarity

The polyethylene/montmorillonite (PE/MMT) nanocomposites were prepared by melt blending the organic MMT with the ternary-monomer graft copolymers of polyethylene (GPE) which were prepared by solid phase grafting maleic anhydride, methyl methacrylate and butyl acrylate onto PE. Fourier transform infrared spectroscopy was used to characterize the structure of GPE. X-ray diffraction patterns and transmission electron microscopy were used to characterize the morphology of GPE/MMT nanocomposites. Results showed that GPE was an outstanding polymeric material to prepare an exfoliated polymer/layered silicates nanocomposites due to the high polarity of GPE and high graft degree. Most layered silicates still maintain the exfoliated and well dispersed state even at 40 phr OMMT content. The exfoliation of layered silicates was attributed to the well intercalation and easy wetting of the grafted oligomers.

Structure analysis of CaTi1−xSnxO3 (x = 0.0–1.0) solid solutions

2014 ◽  
Vol 29 (3) ◽  
pp. 254-259 ◽  
Author(s):  
Naoki Takani ◽  
Hisanori Yamane
Keyword(s):  
Solid State ◽  
Solid Solutions ◽  
Solid State Reaction ◽  
X Ray Diffraction ◽  
Unit Cell Parameters ◽  
X Ray ◽  
Cell Parameters ◽  
Diffraction Patterns ◽  
Perovskite Type ◽  
Perovskite Type Structure

CaTi1−xSnxO3 (x = 0.0–1.0) solid solutions were prepared by solid-state reaction at 1450 °C. Rietveld refinement of their powder X-ray diffraction patterns revealed that all the solid solutions crystallized in orthorhombic cells with the perovskite-type structure, the space group Pbnm. The refined unit-cell parameters linearly increased with nominal tin contents x.

scholarly journals Synthesis and X-ray analysis of complex ferrite YbBiNaFe2O6,5

2017 ◽  
pp. 14-17
Author(s):  
Muhkametkali Mataev ◽  
Moldir Abdraimova ◽  
A. Atabay
Keyword(s):  
Crystal Lattice ◽  
Solid Phase ◽  
Oxide Phase ◽  
Fluorite Structure ◽  
Solid Phase Reaction ◽  
Phase Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cell Parameters ◽  
Mixed Ferrite

The complex oxide phase of the composition YbBiNaFe2O6,5 was synthesized by the high-temperature solid-phase reaction. X-ray diffraction analysis was used to study the structure for the first time; the type of syngony, unit cell parameters, X-ray diffraction and pycnometric densities were determined. X-ray diffraction was carried out by homology method from the initial fluorite structure δBi2O3. The method of least squares refined the parameters of the crystal lattice. The parameters of the orthorhombic lattice of complex mixed ferrite at the value of the number of formula units Z=4 are: a=5.2319, в=5.2186, с=7.5702 Å. The correctness of the results of the X-ray diffraction of complex mixed ferrite was confirmed by the good agreement between the experimental and calculated values of the inverse squares of the interplanar distances (104/d2). Satisfactory consistency of the values of the X-ray and pycnometric densities, ρrad = 8.335, ρpik = 8.328 g/cm3, proves the correctness of the results of the experiment. A comparative analysis of the interrelation between the parameters of the crystal lattice and the parameters of the crystal lattices of the initial oxide δBi2O3. The analysis shows the values of the parameters “a” and “c” are in satisfactory agreement with the parameters of the crystal lattice δBi2O3, the parameter “c” is distorted from the value of the parameter “a” on √2.

scholarly journals Получение, структура, диэлектрические и магнитные свойства керамики SrFe-=SUB=-2/3-=/SUB=-W-=SUB=-1/3-=/SUB=-O-=SUB=-3-=/SUB=-

2018 ◽  
Vol 60 (3) ◽  
pp. 510
Author(s):  
А.В. Павленко ◽  
А.В. Турик ◽  
Л.А. Шилкина ◽  
С.П. Кубрин ◽  
Ю.B. Русалев ◽  
...  
Keyword(s):  
Room Temperature ◽  
Single Phase ◽  
Solid Phase ◽  
Ceramic Technology ◽  
Tetragonal Symmetry ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solid Phase Reactions ◽  
Perovskite Type ◽  
Perovskite Type Structure

AbstractPolycrystalline samples of SrFe_2/3W_1/3O_3 (SFWO) ceramic were obtained by solid-phase reactions with subsequent sintering using conventional ceramic technology. X-ray diffraction analysis showed that at room temperature, the SFWO ceramic is single-phase and has a perovskite-type structure with tetragonal symmetry and parameters a = 3.941(9) Å, c = 3.955(6) Å, and c/a = 1.0035. In studying the magnetic properties and the Mössbauer effect in SFWO ceramics, it is found that the material is a ferrimagnet, and the iron ions are only in the valence state of Fe^3+. It is suggested that in the temperature range of T = 150–210°C, a smeared phase transition from a cubic (paraelectric) phase to a tetragonal (ferroelectric) phase takes place in SFWO with decreasing temperature.

Solubility of Mn in ZnO Crystallites Synthesized Using Solid State Techniques

2020 ◽  
Vol 3 (1) ◽  
pp. 28-39
Author(s):  
Esau Nii Abekah Akwetey Armah ◽  
Martin Egblewogbe ◽  
Hubert Azoda Koffi ◽  
Alfred Ato Yankson ◽  
Francis Kofi Ampong ◽  
...  
Keyword(s):  
Solid Phase ◽  
Solubility Limit ◽  
Phase Method ◽  
Regular Pattern ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
X Ray ◽  
Powder Samples ◽  
Solid Phase Method ◽  
Mn Concentration

Powder samples of Zn1-xMnxO nanocrystal were synthesized at a temperature of 200 °C using solid phase method. Dopant concentrations of 0.005 ≤ x ≤ 0.5 were studied. Powder x-ray diffraction (PXRD) patterns of the samples were analyzed with a view of determining the onset of secondary phases, hence the solubility limit of the dopant. The solubility limit for Mn in ZnO samples synthesized at 200 °C is realized at x < 0.3. With a regular pattern in increment of the Mn concentration, there were variations observed in the trend of the relative intensity, 2θ position and d-spacing indicating uneven addition of Mn (thus Mn2+, Mn3+ or Mn4+).

Sign in / Sign up

Export Citation Format

Share Document