Pengaruh Kompetensi Coder terhadap Keakuratan dan Ketepatan Pengkodean Menggunakan ICD 10 di Rumah Sakit X Pekanbaru Tahun 2016

Author(s):  
Nur Maimun ◽  
Jihan Natassa ◽  
Wen Via Trisna ◽  
Yeye Supriatin

The accuracy in administering the diagnosis code was the important matter for medical recorder, quality of data was the most important thing for health information management of medical recorder. This study aims to know the coder competency for accuracy and precision of using ICD 10 at X Hospital in Pekanbaru. This study was a qualitative method with case study implementation from five informan. The result show that medical personnel (doctor) have never received a training about coding, doctors writing that hard and difficult to read, failure for making diagnoses code or procedures, doctor used an usual abbreviations that are not standard, theres still an officer who are not understand about the nomenclature and mastering anatomy phatology, facilities and infrastructure were supported for accuracy and precision of the existing code. The errors of coding always happen because there is a human error. The accuracy and precision in coding very influence against the cost of INA CBGs, medical and the committee did most of the work in the case of severity level III, while medical record had a role in monitoring or evaluation of coding implementation. If there are resumes that is not clearly case mix team check file needed medical record the result the diagnoses or coding for conformity. Keywords: coder competency, accuracy and precision of coding, ICD 10

Author(s):  
Osama Mahfooz ◽  
Mujtaba Memon ◽  
Asim Iftikhar

<span>A PLC is a digital computer used to automate electromechanical processes. This research is<span> based on automation of a water tank by using Siemens PLC. Automatic control of water tanks<span> can work continuously and can provide accurate quantity of water in less time. In such process<span> there is no need of labor so there is no human error. Without human error, the quality of product<span> is better and the cost of production would definitely decrease with no error in quantity required.<span> Water level sensing can be implemented in industrial plants, commercial use and even at home<br /><br class="Apple-interchange-newline" /></span></span></span></span></span></span>


Author(s):  
W. Ostrowski ◽  
K. Hanus

One of the popular uses of UAVs in photogrammetry is providing an archaeological documentation. A wide offer of low-cost (consumer) grade UAVs, as well as the popularity of user-friendly photogrammetric software allowing obtaining satisfying results, contribute to facilitating the process of preparing documentation for small archaeological sites. However, using solutions of this kind is much more problematic for larger areas. The limited possibilities of autonomous flight makes it significantly harder to obtain data for areas too large to be covered during a single mission. Moreover, sometimes the platforms used are not equipped with telemetry systems, which makes navigating and guaranteeing a similar quality of data during separate flights difficult. The simplest solution is using a better UAV, however the cost of devices of such type often exceeds the financial capabilities of archaeological expeditions. &lt;br&gt;&lt;br&gt; The aim of this article is to present methodology allowing obtaining data for medium scale areas using only a basic UAV. The proposed methodology assumes using a simple multirotor, not equipped with any flight planning system or telemetry. Navigating of the platform is based solely on live-view images sent from the camera attached to the UAV. The presented survey was carried out using a simple GoPro camera which, from the perspective of photogrammetric use, was not the optimal configuration due to the fish eye geometry of the camera. Another limitation is the actual operational range of UAVs which in the case of cheaper systems, rarely exceeds 1 kilometre and is in fact often much smaller. Therefore the surveyed area must be divided into sub-blocks which correspond to the range of the drone. It is inconvenient since the blocks must overlap, so that they will later be merged during their processing. This increases the length of required flights as well as the computing power necessary to process a greater number of images. &lt;br&gt;&lt;br&gt; These issues make prospection highly inconvenient, but not impossible. Our paper presents our experiences through two case studies: surveys conducted in Nepal under the aegis of UNESCO, and works carried out as a part of a Polish archaeological expedition in Cyprus, which both prove that the proposed methodology allows obtaining satisfying results. The article is an important voice in the ongoing debate between commercial and academic archaeologists who discuss the balance between the required standards of conducting archaeological works and economic capabilities of archaeological missions.


2020 ◽  
Vol 30 (Supplement_5) ◽  
Author(s):  
D Baghaturia ◽  
M Kereselidze ◽  
N Skhvitaridze ◽  
T Lobjanidze

Abstract Modern studies are possible to determine the degree of newborn's prematurity. Evidence based data from 65 countries show the increasing trend of preterm births over the past 20 years. Numbers from the National Center for Disease Control and Public Health of Georgia indicate that of 51 183 infants born in 2018, 7 071 (14%) were delivered between 34 to 37 gestational weeks. The aim of this study was to determine the similarities and differences between preterm newborns delivered at 34-37 gestational weeks according the selected variables. This is the quantitative, retrospective study. Data source was the Georgian birth registry for the year 2018. Variables, as gestational age, mode of delivery, newborn weight, Apgar score, newborn diagnoses according the ICD-10, length of stay in maternity home, and others were used for descriptive statistics. In 2018, for preterm deliveries at 34-37 gestational weeks, 53.7% of newborns were delivered by cesarean section and 46.3% physiologically. Despite the similar characteristics, majority of cases had different length of stay at maternity homes, with variation from four to 66 days. The big concern was the quality of target variables - in 30% of cases occurred missing information. Inconsistent occurred in cross-checking of variables - newborns stay at hospital over the recommended data was not justified by provided diagnosis. The results show the big variance between the preterm newborns with the similar characteristics, delivered at 34-37 gestational weeks in Georgia, mainly for the length of stay. Study reveal necessity to provide awareness rising activities among medical personnel to provide reliable, timely and validated data. The major recommendation is to advice Georgian health sector representatives to develop a mechanism for monitoring and ensuring the measures to evaluate the quality of data, uploaded in the birth registry. Key messages Reliable, consistent and validated data are contributing to the rationalization of the healthcare associated resources and controlling costs. Ongoing monitoring of quality in Georgian birth registry should be top priority of responsible authorities.


Author(s):  
Hatice Uenal ◽  
David Hampel

Registries are indispensable in medical studies and provide the basis for reliable study results for research questions. Depending on the purpose of use, a high quality of data is a prerequisite. However, with increasing registry quality, costs also increase accordingly. Considering these time and cost factors, this work is an attempt to estimate the cost advantages of applying statistical tools to existing registry data, including quality evaluation. Results for quality analysis showed that there are unquestionable savings of millions in study costs by reducing the time horizon and saving on average € 523,126 for every reduced year. Replacing additionally the over 25 % missing data in some variables, data quality was immensely improved. To conclude, our findings showed dearly the importance of data quality and statistical input in avoiding biased conclusions due to incomplete data.


2020 ◽  
Vol 3 (2) ◽  
pp. 46-52
Author(s):  
Putu Adiz Siwayana ◽  
Ika Setya Purwanti ◽  
Putu Ayu Sri Murcittowati

Every health facility, whether it is primary, secondary, tertiary, is required to maintain medical records in order to achieve administrative order. Incomplete (incomplete) medical records will affect the service process provided by health workers and have an impact on the quality of service of a hospital. This study aims to determine the factors causing the incomplete filling of inpatient medical records. This study uses a literature review method. The strategy in searching literature reviews is using Google Scholar. In the search phase, articles are limited to publications from 2015-2020. The keywords used are the factors causing incomplete medical record filling. The search results obtained 10 articles and then 5 articles were taken. The results of the literature review show that the factors causing the incompleteness of filling in medical records as a whole can be seen from the lack of knowledge, motivation and awareness of medical personnel about medical records. The meeting as a means of communication between caregivers and management has not yet been implemented to discuss evaluation and monitoring as well as sanctions for officers who do not complete medical records. lack of socialization on filling out medical records. Unsystematic arrangement of medical record forms. Limited availability of funds or budget to support medical record service activities. Conclusion Hospitals need to pay attention to the factors causing the incompleteness of filling in medical records so that filling in medical records is complete according to standards. So that the quality of service, especially the quality of patient medical records.AbstrakSetiap fasilitas kesehatan baik tingkat primer, sekunder, tersier wajib menyelenggarakan rekam medis agar tercapainya tertib administrasi. Ketidaklengkapan (Incomplete) rekam medis akan berpengaruh terhadap proses pelayanan yang diberikan oleh petugas kesehatan dan berdampak pada kualitas pelayanan suatu rumah sakit. Penelitian ini bertujuan untuk mengetahui faktor penyebab ketidaklengkapan pengisian rekam medis rawat inap. Penelitian ini menggunakan metode literatur review. Strategi dalam pencarian literatur review menggunakan Google Scholar. Pada tahap pencarian artikel dibatasi terbitan dari tahun 2015-2020. Kata kunci yang digunakan adalah Faktor Penyebab ketidaklengkapan pengisian rekam medis. Hasil penelusuran artikel didapatkan 10 artikel dan selanjutnya diambil 5 artikel. Hasil dari literatur review didapatkan faktor penyebab ketidaklengkapan pengisian rekam medis secara keseluruhan, penyebabnya dapat dilihat dari kurangnya pengetahuan, motivasi dan kesadaran dari petugas rekam medis tentang rekam medis. Belum terlaksananya rapat sebagai wadah komunikasi antara pemberi asuhan dan manajemen yang membahas evaluasi dan monitoring serta sanksi bagi petugas yang tidak mengisi rekam medis dengan lengkap. kurangnya sosialisasi pengisian rekam medis. Susunan formulir rekam medis yang tidak sistematis. Terbatasnya ketersediaan dana atau anggaran untuk mendukung kegiatan pelayanan rekam medis. Kesimpulan Rumah sakit perlu memperhatikan  faktor penyebab ketidaklengkapan pengisian rekam medis sehingga pengisian rekam medis menjadi lengkap sesuai dengan standar. Sehingga  mutu dari pelayanan terutama mutu rekam medis pasien.


Author(s):  
W. Ostrowski ◽  
K. Hanus

One of the popular uses of UAVs in photogrammetry is providing an archaeological documentation. A wide offer of low-cost (consumer) grade UAVs, as well as the popularity of user-friendly photogrammetric software allowing obtaining satisfying results, contribute to facilitating the process of preparing documentation for small archaeological sites. However, using solutions of this kind is much more problematic for larger areas. The limited possibilities of autonomous flight makes it significantly harder to obtain data for areas too large to be covered during a single mission. Moreover, sometimes the platforms used are not equipped with telemetry systems, which makes navigating and guaranteeing a similar quality of data during separate flights difficult. The simplest solution is using a better UAV, however the cost of devices of such type often exceeds the financial capabilities of archaeological expeditions. <br><br> The aim of this article is to present methodology allowing obtaining data for medium scale areas using only a basic UAV. The proposed methodology assumes using a simple multirotor, not equipped with any flight planning system or telemetry. Navigating of the platform is based solely on live-view images sent from the camera attached to the UAV. The presented survey was carried out using a simple GoPro camera which, from the perspective of photogrammetric use, was not the optimal configuration due to the fish eye geometry of the camera. Another limitation is the actual operational range of UAVs which in the case of cheaper systems, rarely exceeds 1 kilometre and is in fact often much smaller. Therefore the surveyed area must be divided into sub-blocks which correspond to the range of the drone. It is inconvenient since the blocks must overlap, so that they will later be merged during their processing. This increases the length of required flights as well as the computing power necessary to process a greater number of images. <br><br> These issues make prospection highly inconvenient, but not impossible. Our paper presents our experiences through two case studies: surveys conducted in Nepal under the aegis of UNESCO, and works carried out as a part of a Polish archaeological expedition in Cyprus, which both prove that the proposed methodology allows obtaining satisfying results. The article is an important voice in the ongoing debate between commercial and academic archaeologists who discuss the balance between the required standards of conducting archaeological works and economic capabilities of archaeological missions.


1970 ◽  
Vol 2 (2) ◽  
pp. 12
Author(s):  
Rinda Nurul Karimah ◽  
Dony Setiawan ◽  
Puput Septining Nurmalia

Accuracy analysis of replenishment diagnosis codes on the document medical records is very important because if the diagnosis code is not right or not in accordance with the ICD-10, it can cause a decline in the quality of care in hospitals as well as the influence of data, information reporting, and accuracy rates of INA-CBG's that are currently used as a method of payment for patient care. The purpose of this study was to analyze the accuracy of diagnosis codes acute gastroenteritis disease in hospitalized patients by medical record documents in the first quarter of 2015 in the Balung Hospital Jember. This research used qualitative data. Acquisition of data from this study through interviews and observations. Results obtained from the observation of medical record documents at the inpatient unit in the first quarter 2015 in Balung Hospital Jember, there are some numbers determining the accuracy of disease diagnosis codes as many as 17 medical record documents with acute gastroenteritis illness and the determination of improper diagnosis codes as many as 63 medical records document acute gastroenteritis illness. After analyzing, the cause of the problem is the accuracy of the diagnosis that affects the accuracy of writing code, beside it has never been disseminated to physicians and medical records personnel related to the management of medical records. Therefore, it is necessary to carry out activities that can improve the accuracy of disease diagnosis code and quality of human resources, among others, include doctors and medical records personnel in training and socialization related to the management of medical records. Key Words : Diagnosis codes , medical record, acute gastroenteritis


Author(s):  
Esraida Simanjuntak ◽  
Mustamil Alwi Dasopang

  One of the parameters for determining the quality of health services in the hospital is data or information from good and complete medical records. Medical records are an important part of helping the implementation of service delivery to patients at the hospital. Standards relating to medical records in SNARS Edition 1 are in the group of hospital management standards, namely Medical Record Information Management (MIRM) regarding medical record document processing including provision, filling of medical records and reviewing medical records. This research method is descriptive with the method of observation. When this research was conducted in July 2020 at the Imelda Hospital Worker Indonesia Medan. The population taken was 705 medical record documents while the sample in this study was 87 medical record documents. Based on the results of the study, in the review the accuracy of returning medical record documents was 57.4% and 42.5% were incorrect. Readability review of ER assessment as much as 63.2%, assessment of Inpatient as much as 56.3%, CPPT as much as 60.9%, approval for action as much as 77%, reports of anesthesia as much as 68.9%. 3 forms of completeness review are complete, namely Education Assessment, rejection and education form (100%). Suggestions in this study are that review officers must be more assertive to remind every doctor or other medical personnel to pay attention to the accuracy of the restoration, the legibility of medical record files and the completeness of medical record documents. As well as regularly socializing the elements of the MIRM 13.4 assessment.


2017 ◽  
Author(s):  
Jarrod C. Hodgson ◽  
Rowan Mott ◽  
Shane M. Baylis ◽  
Trung T. Pham ◽  
Simon Wotherspoon ◽  
...  

AbstractEcologists are increasingly using technology to improve the quality of data collected on wildlife, particularly for assessing the environmental impacts of human activities. Remotely Piloted Aircraft Systems (RPAS; commonly known as ‘drones’) are widely touted as a cost-effective way to collect high quality wildlife population data, however, the validity of these claims is unclear. Using life-sized seabird colonies containing a known number of replica birds, we show that RPAS-derived data are, on average, between 43% and 96% more accurate than data from the traditional ground-based collection method. We also demonstrate that counts from this remotely sensed imagery can be semi-automated with a high degree of accuracy. The increased accuracy and precision of RPAS-derived wildlife monitoring data provides greater statistical power to detect fine-scale population fluctuations allowing for more informed and proactive ecological management.


1970 ◽  
Vol 3 (5) ◽  
pp. 426-435 ◽  
Author(s):  
Alvan R. Feinstein

Sign in / Sign up

Export Citation Format

Share Document