scholarly journals Syn-sedimentary and early deformation structures as indications for Jurassic pre-orogenic deformation in the SW Bükk Mts.

2020 ◽  
Vol 71 (4) ◽  
Author(s):  
Éva Oravecz ◽  
Szilvia Kövér ◽  
Gábor Héja ◽  
László Fodor
Author(s):  
F. I. Grace ◽  
L. E. Murr

During the course of electron transmission investigations of the deformation structures associated with shock-loaded thin foil specimens of 70/30 brass, it was observed that in a number of instances preferential etching occurred along grain boundaries; and that the degree of etching appeared to depend upon the various experimental conditions prevailing during electropolishing. These included the electrolyte composition, the average current density, and the temperature in the vicinity of the specimen. In the specific case of 70/30 brass shock-loaded at pressures in the range 200-400 kilobars, the predominant mode of deformation was observed to be twin-type faults which in several cases exhibited preferential etching similar to that observed along grain boundaries. A novel feature of this particular phenomenon was that in certain cases, especially for twins located in the vicinity of the specimen edge, the etching or preferential electropolishing literally isolated these structures from the matrix.


Terra Nova ◽  
1997 ◽  
Vol 9 (5) ◽  
pp. 208-212 ◽  
Author(s):  
P.G. Silva ◽  
J.C. Canaveras ◽  
S. Sanchez-Moral ◽  
J. Lario ◽  
E. Sanz

2000 ◽  
Vol 49 (4) ◽  
pp. 197-214 ◽  
Author(s):  
Dan Bowman ◽  
Dorit Banet-Davidovich ◽  
Hendrik J. Bruins ◽  
Johannes Van der Plicht

2017 ◽  
Vol 13 (2) ◽  
pp. 4678-4688
Author(s):  
K. A. Kharroube

We applied two different approaches to investigate the deformation structures of the two nuclei S32 and Ar36 . In the first approach, we considered these nuclei as being deformed and have axes of symmetry. Accordingly, we calculated their moments of inertia by using the concept of the single-particle Schrödinger fluid as functions of the deformation parameter β. In this case we calculated also the electric quadrupole moments of the two nuclei by applying Nilsson model as functions of β. In the second approach, we used a strongly deformed nonaxial single-particle potential, depending on Î² and the nonaxiality parameter γ , to obtain the single-particle energies and wave functions. Accordingly, we calculated the quadrupole moments of S32 and Ar36 by filling the single-particle states corresponding to the ground- and the first excited states of these nuclei. The moments of inertia of S32 and Ar36 are then calculated by applying the nuclear superfluidity model. The obtained results are in good agreement with the corresponding experimental data.


Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 721
Author(s):  
Ukhwan Byun ◽  
A.J. (Tom) van Loon ◽  
Kyoungtae Ko

The Gyeokpori Formation in the Buan volcanic area primarily contains siliciclastic rocks interbedded with volcanoclastics. These sediments are characterized by a variety of soft-sediment deformation structures (SSDS). The SSDS in the Gyeokpori Formation are embedded in poorly sorted conglomerates; slump folds are also present in the formation. The deformation mechanisms and triggers causing the deformation are not yet clear. In the present study, the trigger of the SSDS in the Gyeokpori Formation was investigated using facies analysis. This included evaluation of the reworking process of both cohesive and non-cohesive sediments. The analysis indicates that the SSDS are directly or indirectly associated with the alternation of conglomerates and mud layers with clasts. These layers underwent non-cohesive and cohesive deformation, respectively, which promoted SSDS formation. The slump folds were controlled by the extent of cohesive and non-cohesive deformation experienced by the sediment layers in the slope environment. The SSDS deformation style and morphology differ, particularly in the case of reworking by slump activity. This study contributes to the understanding of lacustrine slope-related soft-sediment deformation structures.


2003 ◽  
Vol 75 (2) ◽  
pp. 235-248 ◽  
Author(s):  
Dilce F. Rossetti

The geological characterization of shallow subsurface Neogene deposits in northeastern Pará State using Ground Penetrating Radar (GPR) revealed normal and reverse faults, as well as folds, not yet well documented by field studies. The faults are identified mostly by steeply-dipping reflections that sharply cut the nearby reflections causing bed offsets, drags and rollovers. The folds are recognized by reflections that are highly undulating, configuring broad concave and convex-up features that are up to 50 m wide and 80 to 90 ns deep. These deformation structures are mostly developed within deposits of Miocene age, though some of the faults might continue into younger deposits as well. Although the studied GPR sections show several diffractions caused by trees, differential degrees of moisture, and underground artifacts, the structures recorded here can not be explained by any of these ''noises''. The detailed analysis of the GPR sections reveals that they are attributed to bed distortion caused by brittle deformation and folding. The record of faults and folds are not widespread in the Neogene deposits of the Bragantina area. These GPR data are in agreement with structural models, which have proposed a complex evolution including strike-slip motion for this area from the Miocene to present.


Fractals ◽  
2018 ◽  
Vol 26 (01) ◽  
pp. 1850018 ◽  
Author(s):  
YOSHITO NAKASHIMA ◽  
JUNKO KOMATSUBARA

Unconsolidated soft sediments deform and mix complexly by seismically induced fluidization. Such geological soft-sediment deformation structures (SSDSs) recorded in boring cores were imaged by X-ray computed tomography (CT), which enables visualization of the inhomogeneous spatial distribution of iron-bearing mineral grains as strong X-ray absorbers in the deformed strata. Multifractal analysis was applied to the two-dimensional (2D) CT images with various degrees of deformation and mixing. The results show that the distribution of the iron-bearing mineral grains is multifractal for less deformed/mixed strata and almost monofractal for fully mixed (i.e. almost homogenized) strata. Computer simulations of deformation of real and synthetic digital images were performed using the egg-beater flow model. The simulations successfully reproduced the transformation from the multifractal spectra into almost monofractal spectra (i.e. almost convergence on a single point) with an increase in deformation/mixing intensity. The present study demonstrates that multifractal analysis coupled with X-ray CT and the mixing flow model is useful to quantify the complexity of seismically induced SSDSs, standing as a novel method for the evaluation of cores for seismic risk assessment.


Sign in / Sign up

Export Citation Format

Share Document