Abstract
Within a major framework of studies around artificial weathering and its effects on different lithotypes, in this work we study the effects of thermal stresses after artificial thermal decay on different types of stones used in historical buildings: a sandstone, a calcarenite and a marble. The sandstone belongs to the so called “Macigno” Formation and mainly outcrops along the northern Apennine (North Western Tuscany) and it has been widely used around Tuscany for building purposes (e.g., in Florence, Lucca, Pisa, Pistoia, etc.); the analysed calcarenite (Gravina) comes from the surrounding of Matera Town and has been deeply used for the construction of the ancient buildings of the town itself; and the marble comes from the Carrara marble district (Northern Tuscany), a highly used stone throughout the centuries as ornamental stone. All these types of stone for their physical and mechanical properties, and aesthetic appearance, have been extensively used as both ornamental stones and as construction materials. To reproduce a plausible effect of natural thermal decay of the stones due to day-to-night and season-to-season fluctuations, we subjected the samples to artificial thermal decay. We carried out different thermal cycles on the samples by using a stove at 150°C and a muffle furnace at 300°C and 450°C. We analysed the physical and mechanical properties before and after each cycle to compare and evaluate the effects of thermal stresses on the stones. Among the different analyses: mass and volume measurements, water absorption tests, mercury intrusion porosimetry, thin-section observations and determination of chromatic alterations through image analysis and Munsell charts method. It was then possible to evaluate the influence of both mineralogy and microstructures on thermal decay of the studied stones (variations in fabric and modifications on physical and mechanical properties).
Mechanical Properties and Morphology of Wood Plastic Composites Produced with Thermally Treated Beech Wood
