scholarly journals A Compact Disc Shaped Microstrip Patch Antenna Using Inset Fed at 5GHz for Satellite Communications

2021 ◽  
Author(s):  
A. Pon Bharathi ◽  
Allan J Wilson ◽  
S. Arun ◽  
V. Ramanathan
Keyword(s):  
Patch Antenna ◽  
Focal Point ◽  
Ground Plane ◽  
Satellite Communications ◽  
Microstrip Patch Antenna ◽  
Radiation Efficiency ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna ◽  
5 Ghz ◽  
Defected Ground Plane

This examination work is focused around planning and simulating another kind of inset feed Disc Shaped Microstrip Patch Antenna (DSMPA) with Inset feed and Defected ground plane (DGP). By presenting a round space at the focal point of the ground plane, improved attributes of Microstrip patch antenna can be accomplished. The proposed Disc Shaped Microstrip patch antenna is reverberating at 5 GHz. Simulation has been finished by utilizing reenactment programming HFSS version15. From recreation results, it discovers that our examined Disc Shaped Microstrip patch antenna yields better return loss of - 25.1 dB & VSWR estimation of 0.96 dB. The examined DSMPA is yielding a higher radiation efficiency of 77.20 %. The minimized size and higher radiation efficiency contrasted with rectangular Microstrip patch antenna makes it all the more generally helpful for satellite communications.

scholarly journals DESIGN OF IMPROVED PERFORMANCE RECTANGULAR MICROSTRIP PATCH ANTENNA USING PEACOCK AND STAR SHAPED DGS

2014 ◽  
pp. 76-80
Author(s):  
PREET KAUR ◽  
RAJIV NEHRA ◽  
MANJEET KADIAN ◽  
DR. ASOK DE ◽  
DR. S.K. AGGARWAL
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Radiation Efficiency ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna ◽  
Improved Performance ◽  
Defected Ground Structures

In this paper, two novel defected ground structures (DGS) are proposed to improve the return loss, compactness, gain and radiation efficiency of rectangular microstrip patch antenna. The performance of antenna is characterized by the shape, dimension & the location of DGS at specific position on ground plane. By incorporating a peacock shaped slot of optimum geometries at suitable location on the ground plane, return loss is enhanced from -23.89 dB to -43.79 dB, radiation efficiency is improved from 97.66% to 100% and compactness of 9.83% is obtained over the traditional antenna .Simulation results shows that the patch antenna with star shaped DGS can improve the impedance matching with better return loss of -35.053 dB from -23.89 dB and compactness of 9% is achieved. In the end comparison of both DGS shapes is carried out to choose one best optimize one. The proposed antennas are simulated and analyzed using Ansoft HFSS (version 11.1) software.

Dual-Band Proximity Coupled Feed Microstrip Patch Antenna with ‘T’ Slot on the Radiating Patch and ‘Dumbbell’ Shaped Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 435 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents Dual-Band proximity coupled feed rectangular Microstrip patch antenna with slots on the radiating patch and Defected Ground Structure. Initially a simple proximity coupled feed rectangular Microstrip patch antenna resonating at 2.4 GHz is designed. Etching out a ‘Dumbbell’ shaped defect from the ground plane and ‘T’ shaped slot from the radiating patch of the proximity coupled feed rectangular Microstrip patch antenna, results in a Dual-Band operation, i.e., resonating at 2.4 GHz and 4.5 GHz; with 30.3 % and 18.8% reduction in the overall area of the patch and the ground plane of the reference antenna respectively. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 123.6 MHz and C-band at frequency of 4.5 GHz with bandwidth of 200 MHz, and a very good return loss of -22.1818 dB and -19.0839 dB at resonant frequency of 2.4 GHz and 4.5 GHz respectively is obtained. The proposed antenna is useful for different wireless applications in the S-band and C-band.</p>

scholarly journals An Open Slot Antenna with Bandwidth Extension for WLAN/UWB Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Jing-Ya Deng ◽  
Tian-Qi Fan ◽  
Yan Zhang ◽  
Xiang Wen ◽  
Guo-Qiang Liu ◽  
...  
Keyword(s):  
Lower Limit ◽  
Patch Antenna ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Match ◽  
Slot Antenna ◽  
Bandwidth Extension ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna ◽  
Uwb Applications

An open slot antenna with extended bandwidth for WLAN and UWB applications is proposed. The radiating structure is composed of a rectangular microstrip patch antenna exciting an L-shaped slot etched on the ground plane. The feed position is optimized to get better impedance match for the higher range of the UWB spectrum, while a step in the slot, realized in the ground plane, is employed to extend the lower limit of the bandwidth so as to cover the 2.4 GHz WLAN frequency band. Using these design solutions the antenna bandwidth is successfully extended to 140% so as to cover both the WLAN and the UWB spectrum.

scholarly journals A Novel Compact Rectangular Microstrip Patch Antenna with a Superstrate Element for 2.4GHz WLAN Applications

2020 ◽  
Vol 3 (1) ◽  
pp. 538-542
Author(s):  
Goker Sener
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Patch Area ◽  
High Permittivity ◽  
Trade Off ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Antenna Surface ◽  
Rectangular Microstrip Patch Antenna

This paper presents a new compact rectangular microstrip patch antenna with a superstrate element. This antenna operates at 2.4 GHz TM01 fundamental mode, which is suitable for WLAN applications. The patch area is reduced by 50% by placing three rectangular slots on the ground plane. In order to compensate for the decreased gain due to the size reduction, a high permittivity superstrate is used with 4mm thickness and 5mm height from the antenna surface. The proposed antenna offers the advantage of occupying half the area of the non-modified rectangular patch while it possesses the same broadside gain of 6-7dB. The trade-off is the additional antenna height due to the placement of the superstrate element.

scholarly journals PROPOSED A COMPACT MULTIBAND AND BROADBAND RECTANGULAR MICROSTRIP PATCH ANTENNA FOR C-BAND AND X-BAND.

2014 ◽  
Vol 13 (3) ◽  
pp. 4291-4301
Author(s):  
Rahul Tiwari ◽  
Seema Verma
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
The Third ◽  
Microstrip Patch ◽  
Highly Efficient ◽  
X Band ◽  
Rectangular Microstrip Patch Antenna ◽  
Multi Band

In this communication two proposed antenna described one for broadband at 6.71445GHz to 11.9362GHz with finite ground plane. The antenna designed with 11.4051mm× 8.388 mm radiating copper patch with ground plane design with 21.0051mm x17. 988mm. And this Compact broadband rectangular shape microstrip patch antenna is designed and analyzed for the return loss of -20.08 dB is achieved at the resonant frequency of 7.941GHz, From Antenna2-it is observed that, antenna for multiband at different frequency. The primary radiating elements are Simple Rectangular Microstrip Patch Antenna in upper side with probe feed and use finite ground plane are two parallel crossed printed slot for three different frequency applications which is smaller in size compared to other available multiband antennas. From the result, it is observed that, the return loss of -16.97 dB is achieved at the first resonant frequency of 4.853GHz, -10.30dB at the second resonant frequency of 8.382GHz, -10.73 dB at the third resonant frequency of 9.265GHz, -17.38 dB at the fourth resonant frequency of 10.15GHz and -12.37 dB at the fifth resonant frequency of 11.91GHz. This broadband and multi-band highly efficient antenna for use in C-Band, and X-Band.

Bandwidth Enhancement of Rectangular Microstrip Patch Antenna using Defected Ground Structure

2016 ◽  
Vol 3 (2) ◽  
pp. 428 ◽  
Author(s):  
Dawit Fitsum ◽  
Dilip Mali ◽  
Mohammed Ismail
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Antenna Structure ◽  
Bandwidth Enhancement ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

<p>This paper presents the bandwidth enhancement of a Proximity Coupled Feed Rectangular Microstrip Patch Antenna using a new Defected Ground Structure - an ‘inverted SHA’ shaped slot on the ground plane of the proximity coupled feed rectangular Microstrip patch antenna. The parameters such as Bandwidth, Return loss, VSWR and Radiation efficiency are improved in the proposed antenna than simple proximity coupled feed rectangular Microstrip patch antenna without Defected Ground Structure. A comparison is also shown for the proposed Microstrip patch antenna with the antenna structure without Defected Ground Structure. The proposed antenna resonates in S-band at frequency of 2.4 GHz with bandwidth of 180 MHz. A very good return loss of -47.9223 dB is obtained for the Microstrip patch antenna with an ’inverted SHA’ shaped Defected Ground Structure. Implementing an ‘inverted SHA’ shaped defect in the ground plane of the proximity coupled feed rectangular Microstrip patch antenna results in 5.3% improvement in bandwidth with 16.01% reduction in the overall area of the ground plane as compared to the Microstrip patch antenna without Defected Ground Structure.</p>

scholarly journals Design of Inset Feed Rectangular Microstrip Patch Antenna with Different Dielectric Substrates

2020 ◽  
Vol 9 (5) ◽  
pp. 1846-1851
Keyword(s):  
Dielectric Constant ◽  
Mobile Communications ◽  
Patch Antenna ◽  
High Speed ◽  
Return Loss ◽  
Satellite Communications ◽  
Microstrip Patch Antenna ◽  
Microwave Antenna ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna

Microstrip antennas find wide applications in high-speed vehicles, and missiles, tanks, satellite communications, mobile communications and wireless communications etc. The main advantage of these antennas over conventional microwave antenna is light weight, low volume, low cost, planar structure and compatibility with integrated circuits. The present paper deals with the design and simulation of an inset feed rectangular microstrip patch antenna using different dielectric substrate materials such as Arlon AD320, FR4 (Epoxy glass) and Vaccum (Air) and having dielectric constant ( )= 3.2, 4.4 and 1.0 respectively and also comparing their performance characteristics. The resonant frequency of the proposed antenna is designed at frequency of 1.9 GHz, which is lying in the L-band region. The antenna software such as High Frequency Structure Simulator is used for designing of proposed antenna. The simulation results shows the maximum bandwidth is 40MHz and minimum gain is 2dB is obtained using FR4 (Epoxy-glass) substrate whose dielectric constant ( ) = 4.4, at which return loss is -35.67dB. Maximum gain is 9.72dB and bandwidth is 39MHz obtained using Vaccum (Air), whose dielectric constant ( ) = 1.0. However, 6 dB gain and 25MHz bandwidth is obtained using Arlon AD 320A substrate, whose dielectric constant ( ) = 2.2 at which return loss is obtained -24.57dB. The proposed antenna can be used for military telemetry, GPS, mobile phone (GSM) and amateur radio applications.

scholarly journals The Improved Radiations in Planar Microstrip Patch Antenna using Linear Slot Etched Ground Plane

2020 ◽  
Vol 8 (6) ◽  
pp. 123-127
Keyword(s):  
Dielectric Constant ◽  
Resonant Frequency ◽  
Patch Antenna ◽  
Ground Plane ◽  
Dominant Mode ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna ◽  
Simulation Results ◽  
Good Agreement

Radiations improvement in a probe fed rectangular microstrip patch antenna using linear slot etched ground plane is proposed. Conventional MPA is designed using Glass Epoxy FR4 substrate. Substrate has dielectric constant 4.4 and its thickness 1.6 mm, operated at resonant frequency 3.05 GHz. The proposed method is simple and easy to etch on a substrate. This will suppress cross-polarized (XP) radiation field only without disturbing the dominant mode and co-polarized radiations. The concept has been tested using HFSS tool and verified its results experimentally. The experimental results show a good agreement with the simulation results.

Sign in / Sign up

Export Citation Format

Share Document