scholarly journals ATENUASI WATER-BOTTOM MULTIPLE DENGAN METODE TRANSFORMASI PARABOLIC RADON

2016 ◽  
Vol 12 (3) ◽  
pp. 145
Author(s):  
Subarsyah Subarsyah ◽  
Tumpal Benhard Nainggolan
Keyword(s):  
Radon Transform ◽  
Seismic Data ◽  
Wide Distribution ◽  
Seismic Section ◽  
Optimal Separation ◽  
Multiple Attenuation ◽  
Parabolic Radon Transform ◽  
Water Bottom

Interferensi water-bottom multipel terhadap reflektor primer menimbulkan efek bersifat destruktif yang menyebabkan penampang seismik menjadi tidak tepat akibat kehadiran reflektor semu. Teknik demultiple perlu diaplikasikan untuk mengatenuasi multipel. Transformasi parabolic radon merupakan teknik atenuasi multipel dengan metode pemisahan dalam domain radon. Multipel sering teridentifikasi pada penampang seismik. Untuk memperbaiki penampang seismik akan dilakukan dengan metode transformasi parabolic radon. Penerapan metode ini mengakibatkan reflektor multipel melemah dan tereduksi setelah dilakukan muting dalam domain radon terhadap zona multipel. Beberapa reflektor primer juga ikut melemah akibat pemisahan dalam domain radon yang kurang optimal, pemisahan akan optimal membutuhkan distribusi offset yang lebar. Kata kunci: Parabolic radon, multipel, atenuasi Water-bottom mutiple interference often destructively interfere with primary reflection that led to incorrect seismic section due to presence apparent reflector. Demultiple techniques need to be applied to attenuate the multiple. Parabolic Radon transform is demultiple attenuation technique that separate multiple and primary in radon domain. Water-bottom mutiple ussualy appear and easly identified on seismic data, parabolic radon transform applied to improve the seismic section. Application of this method to data showing multiple reflectors weakened and reduced after muting multiple zones in the radon domain. Some of the primary reflector also weakened due to bad separation in radon domain, optimal separation will require a wide distribution of offsets. Keywords: Parabolic radon, multiple, attenuation

Multiple attenuation with 3D high-order high-resolution parabolic Radon transform using lower frequency constraints

Geophysics ◽  
2020 ◽  
Vol 85 (3) ◽  
pp. V317-V328
Author(s):  
Jitao Ma ◽  
Guoyang Xu ◽  
Xiaohong Chen ◽  
Xiaoliu Wang ◽  
Zhenjiang Hao
Keyword(s):  
High Resolution ◽  
Radon Transform ◽  
Seismic Data ◽  
Computational Cost ◽  
Real Data ◽  
Multiple Model ◽  
Multiple Attenuation ◽  
Common Depth Point ◽  
Frequency Constraint ◽  
Parabolic Radon Transform

The parabolic Radon transform is one of the most commonly used multiple attenuation methods in seismic data processing. The 2D Radon transform cannot consider the azimuth effect on seismic data when processing 3D common-depth point gathers; hence, the result of applying this transform is unreliable. Therefore, the 3D Radon transform should be applied. The theory of the 3D Radon transform is first introduced. To address sparse sampling in the crossline direction, a lower frequency constraint is introduced to reduce spatial aliasing and improve the resolution of the Radon transform. An orthogonal polynomial transform, which can fit the amplitude variations in different parabolic directions, is combined with the dealiased 3D high-resolution Radon transform to account for the amplitude variations with offset of seismic data. A multiple model can be estimated with superior accuracy, and improved results can be achieved. Synthetic and real data examples indicate that even though our method comes at a higher computational cost than existing techniques, the developed approach provides better attenuation of multiples for 3D seismic data with amplitude variations.

scholarly journals PENERAPAN METODE F-K DEMULTIPLE DALAM KASUS ATENUASI WATER-BOTTOM MULTIPLE

2016 ◽  
Vol 11 (1) ◽  
pp. 33
Author(s):  
Subarsyah Subarsyah ◽  
Sahudin Sahudin
Keyword(s):  
Seismic Data ◽  
Final Section ◽  
Signal To Noise Ratio ◽  
Multiple Reflections ◽  
Seismic Section ◽  
Multiple Attenuation ◽  
Seismic Acquisition ◽  
Marine Seismic ◽  
Second Category ◽  
Water Bottom

Keberadaan water-bottom multiple merupakan hal yang tidak bisa dihindari dalam akuisisi data seismik laut, tentu saja hal ini akan menurunkan tingkat perbandingan sinyal dan noise. Beberapa metode atenuasi telah dikembangkan dalam menekan noise ini. Metode atenuasi multiple diklasifikasikan dalam tiga kelompok meliputi metode dekonvolusi yang mengidentifikasi multiple berdasarkan periodisitasnya, metode filtering yang memisahkan refleksi primer dan multiple dalam domain tertentu (F-K,Tau-P dan Radon domain) serta metode prediksi medan gelombang. Penerapan metode F-K demultiple yang masuk kategori kedua akan diterapkan terhadap data seismik PPPGL tahun 2010 di perairan Teluk Tomini. Atenuasi terhadap water-bottom multiple berhasil dilakukan akan tetapi pada beberapa bagian multiple masih terlihat dengan amplitude relatif lebih kecil. F-K demultiple tidak efektif dalam mereduksi multiple pada offset yang pendek dan multiple pada zona ini yang memberikan kontribusi terhadap keberadaan multiple pada penampang akhir. Kata kunci : F-K demultiple, multiple, atenuasi The presence of water-bottom multiple is unavoidable in marine seismic acquisition, of course, this will reduce signal to noise ratio. Several attenuation methods have been developed to suppress this noise. Multiple attenuation methods are classified into three groups first deconvolution method based on periodicity, second filtering method that separates the primary and multiple reflections in certain domains (FK, Tau-P and the Radon domain) ang the third method based on wavefield prediction. Application of F-K demultiple incoming second category will be applied to the seismic data in 2010 PPPGL at Tomini Gulf waters. Attenuation of the water-bottom multiple successful in reduce multiple but in some parts of seismic section multiple still visible with relatively smaller amplitude. FK demultiple not effective in reducing multiple at near offset and multiple in this zone contribute to the existence of multiple in final section. Key words : F-K demultiple, multiple, attenuation

scholarly journals Practical Implementation of Multiple Attenuation Methods on 2D Deepwater Seismic Data : Seram Sea Case Study

2017 ◽  
Vol 32 (1) ◽  
Author(s):  
Tumpal Bernhard Nainggolan ◽  
Deny Setiady
Keyword(s):  
Seismic Data ◽  
Input Data ◽  
Complex Structure ◽  
Least Square ◽  
Inversion Method ◽  
Practical Implementation ◽  
Proper Solution ◽  
Multiple Attenuation ◽  
Multiple Elimination ◽  
Water Bottom

Some deepwater multiple attenuation processing methods have been developed in the past with partial success. The success of surface multiple attenuation relies on good water bottom reflections for most deepwater marine situations. It brings the bigger ability to build an accurate water bottom multiple prediction model. Major challenges on 2D deepwater seismic data processing especially such a geologically complex structure of Seram Sea, West Papua – Indonesia are to attenuate surface related multiple and to preserve the primary data. Many multiple attenuation methods have been developed to remove surface multiple on these seismic data including most common least-squares, prediction-error filtering and more advanced Radon transform.Predictive Deconvolution and Surface Related Multiple Elimination (SRME) method appears to be a proper solution, especially in complex structure where the above methods fail to distinguish interval velocity difference between primaries and multiples. It does not require any subsurface info as long as source signature and surface reflectivity are provided. SRME method consists of 3 major steps: SRME regularization, multiple modeling and least-square adaptive subtraction. Near offset regularization is needed to fill the gaps on near offset due to unrecorded near traces during the acquisition process. Then, isolating primaries from multiples using forward modeling. Inversion method by subtraction of input data with multiple models to a more attenuated multiple seismic section.Results on real 2D deepwater seismic data show that SRME method as the proper solution should be considered as one of the practical implementation steps in geologically complex structure and to give more accurate seismic imaging for the interpretation.Keywords : multiple attenuation, 2D deepwater seismic, Radon transform, Surface Related Multiple Elimination (SRME). Banyak metode atenuasi pengulangan ganda dikembangkan pada pengolahan data seismik dengan tingkat keberhasilan yang rendah pada masa lalu. Keberhasilan dalam atenuasi pengulangan ganda permukaan salah satunya bergantung pada hasil gelombang pantul pada batas dasar laut dan permukaan pada hampir seluruh survei seismik laut. Hal tersebut menentukan keakuratan dalam membuat model prediksi pengulangan ganda dasar laut dan permukaan air. Tantangan utama dalam pemrosesan data seismik 2D laut dalam khususnya struktur geologi kompleks seperti Laut Seram, Papua Barat – Indonesia adalah pada kegiatan menekan pengulangan ganda permukaan sekaligus mempertahankan data primer. Beberapa metode yang dikembangkan untuk menghilangkan pengulangan ganda permukaan pada data seismik seperti least-square, filter prediksi kesalahan dan transformasi Radon.Dekonvolusi Prediktif dan Metode Surface Related Multiple Elimination (SRME) digunakan sebagai solusi yang baik pada struktur kompleks dimana metode-metode lain gagal untuk memisahkan perbedaan kecepatan interval data primer dan pengulangan ganda. Metode tersebut tidak membutuhkan informasi bawah permukaan selain parameter sumber dan reflektivitas permukaan. Metode SRME terdiri dari 3 tahapan utama : regularisasi SRME, pemodelan pengulangan ganda dan pengurangan adaktif least-square. Regularisasi near offset diperlukan untuk mengisi kekosongan pada near offset yang disebabkan oleh adanya sejumlah tras terdekat yang tidak terekam selama akuisisi. Pemodelan maju digunakan untuk memisahkan data primer dan pengulangan ganda kemudian inversi dengan pengurangan input data dengan model multiple.Hasil pada data seismik 2D laut dalam menunjukkan bahwa metode SRME layak diterapkan sebagai salah satu pengembangan metode atenuasi multiple permukaan serta untuk meningkatkan akurasi data seismik terutama untuk struktur geologi kompleks.Kata kunci : peredaman pengulangan ganda (multiple), seismik 2D laut dalam, transformasi Radon, Surface Related Multiple Attenuation (SRME).

Multiple attenuation in the parabolic τ-p domain using wavefront characteristics of multiple generating primaries

Geophysics ◽  
1999 ◽  
Vol 64 (6) ◽  
pp. 1806-1815 ◽  
Author(s):  
Evgeny Landa ◽  
Igor Belfer ◽  
Shemer Keydar
Keyword(s):  
Radon Transform ◽  
Time Windows ◽  
Real Data ◽  
Multiple Model ◽  
Transform Method ◽  
Multiple Attenuation ◽  
The Common ◽  
P Domain ◽  
Multiple Prediction ◽  
Parabolic Radon Transform

The problem of multiple attenuation has been solved only partially. One of the most common methods of attenuating multiples is an approach based on the Radon transform. It is commonly accepted that the parabolic Radon transform method is only able to attenuate multiples with significant moveouts. We propose a new 2-D method for attenuation of both surface‐related and interbed multiples in the parabolic τ-p domain. The method is based on the prediction of a multiple model from the wavefront characteristics of the primary events. Multiple prediction comprises the following steps: 1) For a given multiple code, the angles of emergence and the radii of wavefront curvatures are estimated for primary reflections for each receiver in the common‐shotpoint gather. 2) The intermediate points which compose a specified multiple event are determined for each shot‐receiver pair. 3) Traveltimes of the multiples are calculated. Wavefields within time windows around the predicted traveltime curves may be considered as multiple model traces which we use for multiple attenuation process. Using the predicted multiple traveltimes, we can define the area in the τ-p domain which contains the main energy of the multiple event. Resolution improvement of the parabolic Radon operator can be achieved through a simple multiplication of each sample in the τ-p space by a nonlinear semblance function. In this work, we follow the idea of defining the multiple reject areas automatically by comparing the energy of the multiple model and the original input data in the τ-p space. We illustrate the usefulness of this algorithm for the attenuation of multiples on both synthetic and real data.

Sign in / Sign up

Export Citation Format

Share Document