Structure formation of slag ash concrete on the basis of high-calcium fly ash and silica fume

1994 ◽  
Vol 27 (7) ◽  
pp. 401-407 ◽  
Author(s):  
S. I. Pavlenko
Keyword(s):  
Fly Ash ◽  
Structure Formation ◽  
Silica Fume ◽  
High Calcium ◽  
High Calcium Fly Ash

scholarly journals Durability of blended cement against sodium sulphate attack and alkali-silica reaction

2021 ◽  
Author(s):  
Giri Raj Adhikari
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Sulphate Attack ◽  
Ternary Blends ◽  
Replacement Level ◽  
Fly Ashes ◽  
Study Results ◽  
High Calcium ◽  
High Calcium Fly Ash

Blended cements were studied for their efficacy against sulphate attack and alkali-silica reaction using six different types of fly ashes, a slag, a silica fume and four types of General Use Portland cement of different alkalinity. The study results showed that low calcium fly ash, silica fume and ground granulated blast furnace slag enhanced the sulphate resistance of cement with increased efficacy with the increase in the replacement level. However, slag and silica fume, especially at low replacement levels, exhibited increased rate of expansion beyond the age of 78 weeks. On the contrary, high calcium fly ashes showed reduced resistance to sulphate attack with no clear trend between the replacement level and expansion. Ternary blends consisting of silica fume, particulary in the amount of 5%, high calcium fly ashes and General Use (GU) cement provided high sulphate resistance, which was attributable to reduced permeability. In the same way, some of ternary blends consisting of slag, high calcium fly ash and GU cement improved sulphate resistance. Pre-blending optimum amount of gypsum with high calcium fly ash enhanced the latter's resistance to sulphate attack by producing more ettringite at the early stage of hydration. In the context of alkali-silica reaction permeability was found to be a contributing factor to the results of the accelerated mortar bar test. High-alkali, high-calcium fly ash was found to worsen the alkali silica reaction when used in concrete containing some reactive aggregates. Ternary blend of slag with high calcium fly ash was found to produce promising results in terms of counteracting alkali-silica reaction.

scholarly journals Geopolymer Mortar Incorporating High Calcium Fly Ash and Silica Fume

2019 ◽  
Vol 65 (1) ◽  
pp. 3-16 ◽  
Author(s):  
V.C. Prabha ◽  
V. Revathi
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Sodium Hydroxide ◽  
Silica Fume ◽  
Sodium Hydroxide Solution ◽  
Test Results ◽  
Dense Microstructure ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Binder Ratio

AbstractAn attempt was made in the present work to study the compressive strength and microstructure of geopolymer containing high calcium fly ash (HCFA) and silica fume. Concentration of sodium hydroxide solution 8M, 10M, 12M & 14M, liquid to binder ratio 0.5 and sodium hydroxide to sodium silicate ratio 2.5 were selected for the mixes. Geopolymer mortar test results indicated that the mix with 40% silica fume by the weight of HCFA yielded higher compressive strength under ambient curing. The XRD pattern typically shows the major portion of amorphous phase of geopolymer. The existence of C-A-S-H gel, N-A-S-H gel and hydroxysodalite gel products were observed through SEM which developed dense microstructure and thus enhanced strength of HCFA and silica fume geopolymer.

scholarly journals Durability of blended cement against sodium sulphate attack and alkali-silica reaction

2021 ◽  
Author(s):  
Giri Raj Adhikari
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Sulphate Attack ◽  
Ternary Blends ◽  
Replacement Level ◽  
Fly Ashes ◽  
Study Results ◽  
High Calcium ◽  
High Calcium Fly Ash

Blended cements were studied for their efficacy against sulphate attack and alkali-silica reaction using six different types of fly ashes, a slag, a silica fume and four types of General Use Portland cement of different alkalinity. The study results showed that low calcium fly ash, silica fume and ground granulated blast furnace slag enhanced the sulphate resistance of cement with increased efficacy with the increase in the replacement level. However, slag and silica fume, especially at low replacement levels, exhibited increased rate of expansion beyond the age of 78 weeks. On the contrary, high calcium fly ashes showed reduced resistance to sulphate attack with no clear trend between the replacement level and expansion. Ternary blends consisting of silica fume, particulary in the amount of 5%, high calcium fly ashes and General Use (GU) cement provided high sulphate resistance, which was attributable to reduced permeability. In the same way, some of ternary blends consisting of slag, high calcium fly ash and GU cement improved sulphate resistance. Pre-blending optimum amount of gypsum with high calcium fly ash enhanced the latter's resistance to sulphate attack by producing more ettringite at the early stage of hydration. In the context of alkali-silica reaction permeability was found to be a contributing factor to the results of the accelerated mortar bar test. High-alkali, high-calcium fly ash was found to worsen the alkali silica reaction when used in concrete containing some reactive aggregates. Ternary blend of slag with high calcium fly ash was found to produce promising results in terms of counteracting alkali-silica reaction.

A Preliminary Study on Cracking Tendency of Cement Paste Incorporating High Calcium Fly Ash

2015 ◽  
Vol 815 ◽  
pp. 158-163
Author(s):  
Verryanto Goenawan ◽  
Antoni ◽  
Djwantoro Hardjito
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Cement Paste ◽  
Ash Content ◽  
Factors Affecting ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Compressive Strength Test ◽  
Type C ◽  
Burning Coal

Fly ash is a waste material from burning coal that can be used to reduce the amount of cement in making concrete and to improve the characteristics of concrete. Besides being able to improve the flowability of fresh concrete, fly ash can also serve to reduce cracking of concrete. But in certain cases, cement paste incorporating fly ash type C (high calcium fly ash) experiences cracks, right after being released from formwork. The purpose of this study were to investigate the causes of cracking of cement paste incorporating fly ash type C, the influence of fly ash variations, and the countermeasures. The evaluation conducted for this experiment were based on visual inspection and compressive strength test of cement paste at 28 days. Test specimens were made in the form of cement paste with fly ash content of 50%, by mass. Fly ash used was of type C taken from three different batches from one source; with fly ash type F from three different sources used for control specimens. Superplasticizer, silica fume, and calcium carbonate were used as additives to evaluate their effect in mitigating cracks. The results show that the use of fly ash type C may cause cracks on the surface of hardened paste. Fly ash content, especially CaO and MgO, are the key factors affecting the cracks tendency on the surface of cement paste, due to expansion. Superplasticizer and silica fume can be used to mitigate cracks of cement paste.

Natural fiber reinforced high calcium fly ash geopolymer mortar

2020 ◽  
Vol 241 ◽  
pp. 118143 ◽  
Author(s):  
Ampol Wongsa ◽  
Ronnakrit Kunthawatwong ◽  
Sakchai Naenudon ◽  
Vanchai Sata ◽  
Prinya Chindaprasirt
Keyword(s):  
Fly Ash ◽  
Natural Fiber ◽  
Fiber Reinforced ◽  
High Calcium ◽  
High Calcium Fly Ash

scholarly journals Novel Analytical Method for Mix Design and Performance Prediction of High Calcium Fly Ash Geopolymer Concrete

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 900
Author(s):  
Chamila Gunasekara ◽  
Peter Atzarakis ◽  
Weena Lokuge ◽  
David W. Law ◽  
Sujeeva Setunge
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Gradient Algorithm ◽  
Geopolymer Concrete ◽  
Statistical Regression ◽  
Solid Ratio ◽  
Marquardt Algorithm ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Matlab Programming

Despite extensive in-depth research into high calcium fly ash geopolymer concretes and a number of proposed methods to calculate the mix proportions, no universally applicable method to determine the mix proportions has been developed. This paper uses an artificial neural network (ANN) machine learning toolbox in a MATLAB programming environment together with a Bayesian regularization algorithm, the Levenberg-Marquardt algorithm and a scaled conjugate gradient algorithm to attain a specified target compressive strength at 28 days. The relationship between the four key parameters, namely water/solid ratio, alkaline activator/binder ratio, Na2SiO3/NaOH ratio and NaOH molarity, and the compressive strength of geopolymer concrete is determined. The geopolymer concrete mix proportions based on the ANN algorithm model and contour plots developed were experimentally validated. Thus, the proposed method can be used to determine mix designs for high calcium fly ash geopolymer concrete in the range 25–45 MPa at 28 days. In addition, the design equations developed using the statistical regression model provide an insight to predict tensile strength and elastic modulus for a given compressive strength.

scholarly journals Influence of Particle Size Distribution of High Calcium Fly Ash on HVFA Mortar Properties

2018 ◽  
Vol 20 (2) ◽  
pp. 51
Author(s):  
Antoni . ◽  
Hendra Surya Wibawa ◽  
Djwantoro Hardjito
Keyword(s):  
Particle Size ◽  
Compressive Strength ◽  
Fly Ash ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Setting Time ◽  
High Volume ◽  
High Volume Fly Ash ◽  
High Calcium ◽  
High Calcium Fly Ash

This study evaluates the effect of particle size distribution (PSD) of high calcium fly ash on high volume fly ash (HVFA) mortar characteristics. Four PSD variations of high calcium fly ash used were: unclassified fly ash and fly ash passing sieve No. 200, No. 325 and No. 400, respectively. The fly ash replacement ratio of the cementitious material ranged between 50-70%. The results show that with smaller fly ash particles size and higher levels of fly ash replacement, the workability of the mixture was increased with longer setting time. There was an increase in mortar compressive strength with finer fly ash particle size, compared to those with unclassified ones, with the highest strength was found at those with fly ash passing mesh No. 325. The increase was found due to better compactability of the mixture. Higher fly ash replacement reduced the mortar’s compressive strength, however, the rate was reduced when finer fly ash particles was used.

Sign in / Sign up

Export Citation Format

Share Document