Stabilization of Drilling Fluid Waste with Fly Ash

1986 ◽  
Vol 86 ◽  
Author(s):  
George M. Deeley ◽  
Larry W. Canter ◽  
Joakim G. Laguros
Keyword(s):  
Fly Ash ◽  
Caustic Soda ◽  
Drilling Fluid ◽  
Drilling Mud ◽  
Fly Ashes ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Water Based ◽  
Land Disposal ◽  
Drilling Muds

Water based drilling muds typically contain clays, barite, lime, caustic soda and other chemicals, such as polymers. Land disposal of these wastes raises the possibility of groundwater pollution which can be abated if the waste is stabilized either by chemical reaction or by solidification through some form of cementation. Many ASTM high-calcium (Class C) fly ashes are cementitious and thus may be useful in stabilization of drilling mud. The basic idea is to stabilize the clay-containing muds using the model of soil and roadbed stabilization with high-calcium fly ash [1]. Fly ash that is not utilized is considered to be a solid waste, so this application would would actually constitute codisposal of two wastes.

scholarly journals Durability of blended cement against sodium sulphate attack and alkali-silica reaction

2021 ◽  
Author(s):  
Giri Raj Adhikari
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Sulphate Attack ◽  
Ternary Blends ◽  
Replacement Level ◽  
Fly Ashes ◽  
Study Results ◽  
High Calcium ◽  
High Calcium Fly Ash

Blended cements were studied for their efficacy against sulphate attack and alkali-silica reaction using six different types of fly ashes, a slag, a silica fume and four types of General Use Portland cement of different alkalinity. The study results showed that low calcium fly ash, silica fume and ground granulated blast furnace slag enhanced the sulphate resistance of cement with increased efficacy with the increase in the replacement level. However, slag and silica fume, especially at low replacement levels, exhibited increased rate of expansion beyond the age of 78 weeks. On the contrary, high calcium fly ashes showed reduced resistance to sulphate attack with no clear trend between the replacement level and expansion. Ternary blends consisting of silica fume, particulary in the amount of 5%, high calcium fly ashes and General Use (GU) cement provided high sulphate resistance, which was attributable to reduced permeability. In the same way, some of ternary blends consisting of slag, high calcium fly ash and GU cement improved sulphate resistance. Pre-blending optimum amount of gypsum with high calcium fly ash enhanced the latter's resistance to sulphate attack by producing more ettringite at the early stage of hydration. In the context of alkali-silica reaction permeability was found to be a contributing factor to the results of the accelerated mortar bar test. High-alkali, high-calcium fly ash was found to worsen the alkali silica reaction when used in concrete containing some reactive aggregates. Ternary blend of slag with high calcium fly ash was found to produce promising results in terms of counteracting alkali-silica reaction.

scholarly journals Comparative Analysis of the Effect of Barite and Hematite on the Rheology of Water-Based Drilling Mud

2021 ◽  
Vol 1 (2) ◽  
Author(s):  
Osei H
Keyword(s):  
Rheological Properties ◽  
Drilling Fluid ◽  
Attrition Rate ◽  
Drilling Mud ◽  
Cleaning Efficiency ◽  
Drilling Operation ◽  
Water Based ◽  
Petroleum Resources ◽  
Drilling Muds ◽  
The Impact

High demand for oil and gas has led to exploration of more petroleum resources even at remote areas. The petroleum resources are found in deeper subsurface formations and drilling into such formations requires a well-designed drilling mud with suitable rheological properties in order to avoid or reduce associated drilling problems. This is because rheological properties of drilling muds have considerable effect on the drilling operation and cleaning of the wellbore. Mud engineers therefore use mud additives to influence the properties and functions of the drilling fluid to obtain the desired drilling mud properties especially rheological properties. This study investigated and compared the impact of barite and hematite as weighting agents for water-based drilling muds and their influence on the rheology. Water-based muds of different concentrations of weighting agents (5%, 10%, 15% and 20% of the total weight of the drilling mud) were prepared and their rheological properties determined at an ambient temperature of 24ᵒC to check their impact on drilling operation. The results found hematite to produce higher mud density, plastic viscosity, gel strength and yield point when compared to barite at the same weighting concentrations. The higher performance of the hematite-based muds might be attributed to it having higher specific gravity, better particle distribution and lower particle attrition rate and more importantly being free from contaminants. The water-based muds with hematite will therefore be more promising drilling muds with higher drilling and hole cleaning efficiency than those having barite.

scholarly journals Adsorption of Se(IV) in aqueous solution by zeolites synthesized from fly ashes with different compositions

2019 ◽  
Vol 9 (4) ◽  
pp. 506-519
Author(s):  
Xiao Zhang ◽  
Xinyuan Li ◽  
Fan Zhang ◽  
Shaohao Peng ◽  
Sadam Hussain Tumrani ◽  
...  
Keyword(s):  
Fly Ash ◽  
Contact Time ◽  
High Capacity ◽  
Freundlich Isotherm ◽  
Fly Ashes ◽  
Order Model ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Equilibrium Data ◽  
Pseudo Second Order

Abstract Low-calcium fly ash (LC-F) and high-calcium fly ash (HC-F) were used to synthesize corresponding zeolites (LC-Z and HC-Z), then for adsorption of Se(IV) in water. The results showed that c zeolites can effectively adsorb Se(IV). The optimal adsorption conditions were set at contact time = 360 min; pH = 2.0; the amount of adsorbent = 5.0 g·L−1; temperature = 25 °C; initial Se(IV) concentration = 10 mg·L−1. The removal efficiency of HC-Z was higher than the LC-Z after it had fully reacted because the specific surface area (SSA) of HC-Z was higher than LC-Z. The adsorption kinetics model of Se(IV) uptake by HC-Z followed the pseudo-second-order model. The Freundlich isotherm model agreed better with the equilibrium data for HC-Z and LC-Z. The maximum Se(IV) adsorption capacity was 4.16 mg/g for the HC-Z and 3.93 mg/g for the LC-Z. For the coexisting anions, barely affected Se(IV) removal, while significant affected it. Regenerated zeolites still had high capacity for Se(IV) removal. In conclusion, zeolites synthesized from fly ashes are a promising material for adsorbing Se(IV) from wastewater, and selenium-loaded zeolite has the potential to be used as a Se fertilizer to release selenium in Se-deficient areas.

scholarly journals Durability of blended cement against sodium sulphate attack and alkali-silica reaction

2021 ◽  
Author(s):  
Giri Raj Adhikari
Keyword(s):  
Fly Ash ◽  
Silica Fume ◽  
Alkali Silica Reaction ◽  
Sulphate Attack ◽  
Ternary Blends ◽  
Replacement Level ◽  
Fly Ashes ◽  
Study Results ◽  
High Calcium ◽  
High Calcium Fly Ash

Blended cements were studied for their efficacy against sulphate attack and alkali-silica reaction using six different types of fly ashes, a slag, a silica fume and four types of General Use Portland cement of different alkalinity. The study results showed that low calcium fly ash, silica fume and ground granulated blast furnace slag enhanced the sulphate resistance of cement with increased efficacy with the increase in the replacement level. However, slag and silica fume, especially at low replacement levels, exhibited increased rate of expansion beyond the age of 78 weeks. On the contrary, high calcium fly ashes showed reduced resistance to sulphate attack with no clear trend between the replacement level and expansion. Ternary blends consisting of silica fume, particulary in the amount of 5%, high calcium fly ashes and General Use (GU) cement provided high sulphate resistance, which was attributable to reduced permeability. In the same way, some of ternary blends consisting of slag, high calcium fly ash and GU cement improved sulphate resistance. Pre-blending optimum amount of gypsum with high calcium fly ash enhanced the latter's resistance to sulphate attack by producing more ettringite at the early stage of hydration. In the context of alkali-silica reaction permeability was found to be a contributing factor to the results of the accelerated mortar bar test. High-alkali, high-calcium fly ash was found to worsen the alkali silica reaction when used in concrete containing some reactive aggregates. Ternary blend of slag with high calcium fly ash was found to produce promising results in terms of counteracting alkali-silica reaction.

Agglomeration of High Calcium Fly Ash for Utilization I. Physical Properties

1989 ◽  
Vol 178 ◽  
Author(s):  
Kenneth L. Bergeson ◽  
Carol L Kilgour ◽  
Douglas Overmohle
Keyword(s):  
Fly Ash ◽  
Soil Stabilization ◽  
Research Work ◽  
Aggregate Size ◽  
Cost Effective ◽  
Fly Ashes ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Strength And Durability ◽  
Aggregate Material

AbstractInability of the Iowa fly ash industry to meet their demands for fly ash during the peak construction months led the Iowa Fly Ash Affiliates to initiate research into storage alternatives for high-calcium fly ashes. Conventional, closed storage facilities are extremely expensive and currently not cost effective. In addition, the industry is faced with the rising costs of landfill disposal. This paper presents the results of utilizing the rapid self-cementitious properties of high-calcium ashes to agglomerate them into discrete, aggregate size particles for stockpiling. The two fly ashes used in this study contained 25 to 30 percent calcium. Water was used as an agglomerating medium. Agglomeration was accomplished using three types of commercial equipment as follows: continuous rotary pan agglomerator, continuous auger agglomerator and a batch turbine agglomerator. All units produced relatively well graded aggregate material differing primarily in particle shape and texture. Research work discussed includes gradation, strength, and durability of the agglomerates. Agglomerates were also reground using a newlydeveloped, energy efficient, micronizing technique. Research results using the reground ash in concrete and soil stabilization are presented.

Use of a Database of Chemical, Mineralogical and Physical Properties of North American Fly Ash to Study the Nature of Fly Ashand Its Utilization as a Mineral Admixture in Concrete

1989 ◽  
Vol 178 ◽  
Author(s):  
G. J. Mccarthy ◽  
J. K. SOLEM ◽  
O. E. Manz ◽  
D. J. Hassett
Keyword(s):  
Fly Ash ◽  
North American ◽  
Chemical Constituents ◽  
Mineral Admixture ◽  
Test Results ◽  
Fly Ashes ◽  
Physical Test ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Bulk Chemical

AbstractA database of chemical, mineralogical and physical characteristics of North American fly ashes has been assembled by the Western Fly Ash Research, Development and Data Center. One-hundred and seventy-eight representative ashes were divided into three groups according to their analytical CaO content: low-calcium, <10%; intermediate-calcium, 10–20%; high-calcium, 20+%. Statistical analyses were performed within each of the three groups. Thirty-two plots relating chemical composition, mineralogy and physical test results are presented. Extensive discussions relating the chemistry and mineralogy of the ash to the source coal, the distribution of the chemical constituents among crystalline and glassy phases, and the reactions of these phases in concrete are given. The consistency of high-calcium fly ash generated at a Midwestern U.S. power station fired with Wyoming bituminous coal was studied using ninety-three ashes collected over a two year period. The availability of mineralogy for each ash leads to a more thorough understanding of the bulk chemical and physical test results used in evaluating fly ashes for utilization, and in modeling their behavior after disposal

Natural fiber reinforced high calcium fly ash geopolymer mortar

2020 ◽  
Vol 241 ◽  
pp. 118143 ◽  
Author(s):  
Ampol Wongsa ◽  
Ronnakrit Kunthawatwong ◽  
Sakchai Naenudon ◽  
Vanchai Sata ◽  
Prinya Chindaprasirt
Keyword(s):  
Fly Ash ◽  
Natural Fiber ◽  
Fiber Reinforced ◽  
High Calcium ◽  
High Calcium Fly Ash

scholarly journals Novel Analytical Method for Mix Design and Performance Prediction of High Calcium Fly Ash Geopolymer Concrete

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 900
Author(s):  
Chamila Gunasekara ◽  
Peter Atzarakis ◽  
Weena Lokuge ◽  
David W. Law ◽  
Sujeeva Setunge
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Gradient Algorithm ◽  
Geopolymer Concrete ◽  
Statistical Regression ◽  
Solid Ratio ◽  
Marquardt Algorithm ◽  
High Calcium ◽  
High Calcium Fly Ash ◽  
Matlab Programming

Despite extensive in-depth research into high calcium fly ash geopolymer concretes and a number of proposed methods to calculate the mix proportions, no universally applicable method to determine the mix proportions has been developed. This paper uses an artificial neural network (ANN) machine learning toolbox in a MATLAB programming environment together with a Bayesian regularization algorithm, the Levenberg-Marquardt algorithm and a scaled conjugate gradient algorithm to attain a specified target compressive strength at 28 days. The relationship between the four key parameters, namely water/solid ratio, alkaline activator/binder ratio, Na2SiO3/NaOH ratio and NaOH molarity, and the compressive strength of geopolymer concrete is determined. The geopolymer concrete mix proportions based on the ANN algorithm model and contour plots developed were experimentally validated. Thus, the proposed method can be used to determine mix designs for high calcium fly ash geopolymer concrete in the range 25–45 MPa at 28 days. In addition, the design equations developed using the statistical regression model provide an insight to predict tensile strength and elastic modulus for a given compressive strength.

Sign in / Sign up

Export Citation Format

Share Document