Low-cost, Triple-frequency Multi-GNSS PPP and MEMS IMU Integration for Continuous Navigation in Urban Environments

2021 ◽  
Author(s):  
Sudha Vana
Keyword(s):  
Low Cost ◽  
Urban Environments ◽  
Triple Frequency ◽  
Mems Imu

scholarly journals MEMS Based SINS/OD Filter for Land Vehicles’ Applications

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Huisheng Liu ◽  
Zengcai Wang ◽  
Susu Fang ◽  
Chao Li
Keyword(s):  
Navigation System ◽  
Velocity Measurement ◽  
Microelectromechanical Systems ◽  
Low Cost ◽  
Detection Algorithm ◽  
Measurement Unit ◽  
Integrated Navigation ◽  
Integrated Navigation System ◽  
Land Vehicles ◽  
Mems Imu

A constrained low-cost SINS/OD filter aided with magnetometer is proposed in this paper. The filter is designed to provide a land vehicle navigation solution by fusing the measurements of the microelectromechanical systems based inertial measurement unit (MEMS IMU), the magnetometer (MAG), and the velocity measurement from odometer (OD). First, accelerometer and magnetometer integrated algorithm is studied to stabilize the attitude angle. Next, a SINS/OD/MAG integrated navigation system is designed and simulated, using an adaptive Kalman filter (AKF). It is shown that the accuracy of the integrated navigation system will be implemented to some extent. The field-test shows that the azimuth misalignment angle will diminish to less than 1°. Finally, an outliers detection algorithm is studied to estimate the velocity measurement bias of the odometer. The experimental results show the enhancement in restraining observation outliers that improves the precision of the integrated navigation system.

Low-cost localization system of impulsive sounds for urban environments

2014 ◽  
Author(s):  
Juan Manuel López R. ◽  
Jose Ignacio Marulanda B.
Keyword(s):  
Low Cost ◽  
Urban Environments ◽  
Localization System

Evaluation of a Low Cost Tactical Grade MEMS IMU for Maritime Navigation

2015 ◽  
pp. 237-246 ◽  
Author(s):  
R Ziebold ◽  
M Romanovas ◽  
L Lanca
Keyword(s):  
Low Cost ◽  
Maritime Navigation ◽  
Mems Imu

scholarly journals Adaptive Filtering on GPS-Aided MEMS-IMU for Optimal Estimation of Ground Vehicle Trajectory

Sensors ◽  
2019 ◽  
Vol 19 (24) ◽  
pp. 5357 ◽  
Author(s):  
Haseeb Ahmed ◽  
Ihsan Ullah ◽  
Uzair Khan ◽  
Muhammad Bilal Qureshi ◽  
Sajjad Manzoor ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Autonomous Navigation ◽  
Inertial Sensors ◽  
Low Cost ◽  
Optimal Estimation ◽  
Cost Effective ◽  
Estimation Accuracy ◽  
Ground Vehicle ◽  
Navigation Data ◽  
Mems Imu

Fusion of the Global Positioning System (GPS) and Inertial Navigation System (INS) for navigation of ground vehicles is an extensively researched topic for military and civilian applications. Micro-electro-mechanical-systems-based inertial measurement units (MEMS-IMU) are being widely used in numerous commercial applications due to their low cost; however, they are characterized by relatively poor accuracy when compared with more expensive counterparts. With a sudden boom in research and development of autonomous navigation technology for consumer vehicles, the need to enhance estimation accuracy and reliability has become critical, while aiming to deliver a cost-effective solution. Optimal fusion of commercially available, low-cost MEMS-IMU and the GPS may provide one such solution. Different variants of the Kalman filter have been proposed and implemented for integration of the GPS and the INS. This paper proposes a framework for the fusion of adaptive Kalman filters, based on Sage-Husa and strong tracking filtering algorithms, implemented on MEMS-IMU and the GPS for the case of a ground vehicle. The error models of the inertial sensors have also been implemented to achieve reliable and accurate estimations. Simulations have been carried out on actual navigation data from a test vehicle. Measurements were obtained using commercially available GPS receiver and MEMS-IMU. The solution was shown to enhance navigation accuracy when compared to conventional Kalman filter.

scholarly journals Performance Enhancement of Pedestrian Navigation Systems Based on Low-Cost Foot-Mounted MEMS-IMU/Ultrasonic Sensor

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 364 ◽  
Author(s):  
Ming Xia ◽  
Chundi Xiu ◽  
Dongkai Yang ◽  
Li Wang
Keyword(s):  
Kalman Filter ◽  
Extended Kalman Filter ◽  
Navigation System ◽  
Low Cost ◽  
Ultrasonic Sensor ◽  
Measurement Unit ◽  
Positioning Error ◽  
Process Noise ◽  
Pedestrian Navigation ◽  
Mems Imu

The pedestrian navigation system (PNS) based on inertial navigation system-extended Kalman filter-zero velocity update (INS-EKF-ZUPT or IEZ) is widely used in complex environments without external infrastructure owing to its characteristics of autonomy and continuity. IEZ, however, suffers from performance degradation caused by the dynamic change of process noise statistics and heading estimation errors. The main goal of this study is to effectively improve the accuracy and robustness of pedestrian localization based on the integration of the low-cost foot-mounted microelectromechanical system inertial measurement unit (MEMS-IMU) and ultrasonic sensor. The proposed solution has two main components: (1) the fuzzy inference system (FIS) is exploited to generate the adaptive factor for extended Kalman filter (EKF) after addressing the mismatch between statistical sample covariance of innovation and the theoretical one, and the fuzzy adaptive EKF (FAEKF) based on the MEMS-IMU/ultrasonic sensor for pedestrians was proposed. Accordingly, the adaptive factor is applied to correct process noise covariance that accurately reflects previous state estimations. (2) A straight motion heading update (SMHU) algorithm is developed to detect whether a straight walk happens and to revise errors in heading if the ultrasonic sensor detects the distance between the foot and reflection point of the wall. The experimental results show that horizontal positioning error is less than 2% of the total travelled distance (TTD) in different environments, which is the same order of positioning error compared with other works using high-end MEMS-IMU. It is concluded that the proposed approach can achieve high performance for PNS in terms of accuracy and robustness.

Sign in / Sign up

Export Citation Format

Share Document