scholarly journals Relationship between Fuel Properties and Cetane Response of Cetane Improver for Non-Aromatic and Aromatic Fuels Used In A Single Cylinder Heavy Duty Diesel Engine

2019 ◽  
Vol 2 (1) ◽  
Keyword(s):  
Sensitivity Analysis ◽  
Diesel Engine ◽  
Ignition Delay ◽  
Cetane Number ◽  
Fuel Properties ◽  
Heavy Duty ◽  
Heavy Duty Diesel Engine ◽  
Ignition Quality ◽  
Main Factors ◽  
Heavy Duty Diesel

Ignition improver additives are used to improve the ignition quality, or reduce the ignition delay; i.e. the time between when fuel is injected and time when combustion start is different this difference in time is minimize by additive is called cetane improver (CN). The Cetane Number (CN) is the most widely accepted measure of ignition quality to get desired value of centane number some additive are used hence ignition improvers are usually characterized by the fact that at what extent they can increase CN. By increasing cetane number we have two benefits that it helps smoother combustion and lower emissions. Fuel properties are always considered as one of the main factors to diesel engines concerning performance of cetane improver. There are still challenges for researchers to identify the most correlating and non-correlating fuel properties and their effects on cetane improver .In this study to derive the most un-correlating and correlating properties. In parallel, sensitivity analysis was performed for the fuel properties as well as to effect on performance of cetane improver

Flame lift-off length and soot production of oxygenated fuels in relation with ignition delay in a DI heavy-duty diesel engine

2011 ◽  
Vol 158 (3) ◽  
pp. 525-538 ◽  
Author(s):  
A.J. Donkerbroek ◽  
M.D. Boot ◽  
C.C.M. Luijten ◽  
N.J. Dam ◽  
J.J. ter Meulen
Keyword(s):  
Diesel Engine ◽  
Ignition Delay ◽  
Heavy Duty ◽  
Heavy Duty Diesel Engine ◽  
Heavy Duty Diesel ◽  
Lift Off ◽  
Oxygenated Fuels

Fuel Property Effects on PCCI Combustion in a Heavy-Duty Diesel Engine

2012 ◽  
Vol 134 (5) ◽  
Author(s):  
Cosmin E. Dumitrescu ◽  
W. Stuart Neill ◽  
Hongsheng Guo ◽  
Vahid Hosseini ◽  
Wallace L. Chippior
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Cetane Number ◽  
Injection System ◽  
Injection Timing ◽  
Heavy Duty ◽  
Fuel Property ◽  
Heavy Duty Diesel Engine ◽  
Soot Emissions ◽  
Heavy Duty Diesel

An experimental study was performed to investigate fuel property effects on premixed charge compression ignition (PCCI) combustion in a heavy-duty diesel engine. A matrix of research diesel fuels designed by the Coordinating Research Council, referred to as the Fuels for Advanced Combustion Engines (FACE), was used. The fuel matrix design covers a wide range of cetane numbers (30 to 55), 90% distillation temperatures (270 to 340 °C) and aromatics content (20 to 45%). The fuels were tested in a single-cylinder Caterpillar diesel engine equipped with a common-rail fuel injection system. The engine was operated at 900 rpm, a relative air/fuel ratio of 1.2 and 60% exhaust gas recirculation (EGR) for all fuels. The study was limited to a single fuel injection event starting between −30° and 0 °CA after top dead center (aTDC) with a rail pressure of 150 MPa. The brake mean effective pressure (BMEP) ranged from 2.6 to 3.1 bar depending on the fuel and its injection timing. The experimental results show that cetane number was the most important fuel property affecting PCCI combustion behavior. The low cetane number fuels had better brake specific fuel consumption (BSFC) due to more optimized combustion phasing and shorter combustion duration. They also had a longer ignition delay period available for premixing, which led to near-zero soot emissions. The two fuels with high cetane number and high 90% distillation temperature produced significant soot emissions. The two fuels with high cetane number and high aromatics produced the highest brake specific NOx emissions, although the absolute values were below 0.1 g/kW-h. Brake specific HC and CO emissions were primarily a function of the combustion phasing, but the low cetane number fuels had slightly higher HC and lower CO emissions than the high cetane number fuels.

A Computational Investigation of Fuel Chemical and Physical Properties Effects on Gasoline Compression Ignition in a Heavy-Duty Diesel Engine

2017 ◽  
Author(s):  
Yu Zhang ◽  
Alexander Voice ◽  
Yuanjiang Pei ◽  
Michael Traver ◽  
David Cleary
Keyword(s):  
Diesel Engine ◽  
Physical Properties ◽  
Ignition Delay ◽  
Fuel Efficiency ◽  
Air Entrainment ◽  
Compression Ignition ◽  
Heavy Duty ◽  
Heavy Duty Diesel Engine ◽  
Air Mixing ◽  
Heavy Duty Diesel

Gasoline compression ignition (GCI) offers the potential to reduce criteria pollutants while achieving high fuel efficiency in heavy-duty diesel engines. This study aims to investigate the fuel chemical and physical properties effects on GCI operation in a heavy-duty diesel engine through closed-cycle, 3-D computational fluid dynamics (CFD) combustion simulations, investigating both mixing-controlled combustion (MCC) at 18.9 compression ratio (CR) and partially premixed combustion (PPC) at 17.3 CR. For this work, fuel chemical properties were studied in terms of the primary reference fuel (PRF) number (0–91) and the octane sensitivity (0–6) while using a fixed fuel physical surrogate. For the fuel physical properties effects investigation, PRF70 was used as the gas-phase chemical surrogate. Six physical properties were individually perturbed, varying from the gasoline to the diesel range. Combustion simulations were carried out at 1375 RPM and 10 bar brake mean effective pressure (BMEP). Reducing fuel reactivity (or increasing PRF number) was found to influence ignition delay time (IDT) more significantly for PPC than for MCC due to the lower charge temperature and higher EGR rate involved in the PPC mode. 0-D IDT calculations suggested that the fuel reactivity impact on IDT diminished with an increase in temperature. Moreover, higher reactivity gasolines exhibited stronger negative coefficient (NTC) behavior and their IDTs showed less sensitivity to temperature change. When exploring the octane sensitivity effect, ignition was found to occur in temperature conditions more relevant to the MON test. Therefore, increasing octane sensitivity (reducing MON) led to higher reactivity and shorter ignition delay. Under both MCC (TIVC: 385K) and PPC (TIVC: 353K), all six physical properties showed little meaningful impact on global combustion behavior, NOx and fuel efficiency. Among the physical properties investigated, only density showed a notable effect on soot emissions. Increasing density resulted in higher soot due to deteriorated air entrainment into the spray and the slower fuel-air mixing process. When further reducing the IVC temperature from 353K to 303K under PPC, the spray vaporization and fuel-air mixing were markedly slowed. Consequently, increasing the liquid fuel density created a more pronounced presence of fuel-rich and higher reactivity regions, thereby leading to an earlier onset of hot ignition and higher soot.

Sign in / Sign up

Export Citation Format

Share Document