scholarly journals Effect of Genotype and Density on the Productivity of Mungbean

2016 ◽  
Vol 19 (1) ◽  
pp. 11-17
Author(s):  
R Yeasmin ◽  
MA Karim ◽  
MM Haque ◽  
MAB Mia
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Light Transmission ◽  
Block Design ◽  
Plant Spacing ◽  
Seed Number ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Plant Densities ◽  
Number Of Seeds

An investigation was carried out at the experimental field of the Department of Agronomy, Bangabandhu Sheikh Mujibur Rahman Agricultural University, Gazipur during September to November 2014 to evaluate the productivity of three mungbean genotypes, viz., GK-24 (G1), GK-63 (G2) and BU mug 4 (G3) under four plant spacing (densities) such as i) 15 cm x 10 cm= 66 plants m-2 (D1), ii) 20 cm x 10 cm= 50 plants m-2 (D2), iii) 25 cm x 10 cm= 40 plants m-2 (D3) and iv) 30 cm x 10 cm=33 plants m-2 (D4). The experiment was conducted in a factorial randomized complete block design with three replications. A wide variation among the genotypes was observed in relation to light transmission, yield, and yield contributing characters. At 30 cm x 10 cm spacing (D4) the highest light transmission ratio (LTR) was observed in G1 genotype (57.92) and the lowest LTR value in G2 genotype (46.92). Among the three genotypes, G1 produced the highest seed yield (1094 kg ha-1). But highest seed number pod-1 was found in D2 (11.61) while maximum pods plant-1 (11.08) was in D4 treatment followed by D3 (10.59). Among the four plant densities, treatment D3 showed the highest 1000-seed weight (50.30 g). The highest seed yield (1114 kg ha-1) was recorded in the treatment D4. Among the interaction, the highest number of seeds pod-1 (12.20) was found in the treatment D1G3, though the highest number of pods plant-1(12.03) was in treatment D4G1 but the1000-seed weight was the highest (51.92 g) in D3G1. The highest seed yield (1230 kg ha-1) was recorded from treatment D4G1. The result showed that GK 24 genotype performed the best in all respects of yield and yield attributes at 30 cm x 10 cm spacing compared to other treatments.Bangladesh Agron. J. 2016, 19(1): 11-17

scholarly journals GROWTH AND YIELD EVALUATION OF MUSTARD VARIETIES GROWN IN A MEDIUM HIGHLAND OF KHULNA REGION

2021 ◽  
Vol 18 (1) ◽  
pp. 1-8
Keyword(s):  
Seed Weight ◽  
Harvest Index ◽  
Block Design ◽  
Growth Yield ◽  
Growth And Yield ◽  
Rabi Season ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Stover Yield ◽  
Number Of Seeds

The present research was conducted at the experimental field of Agrotechnology Discipline, Khulna University, Khulna during Rabi season 2016-17 to investigate the growth and yield performance of mustard varieties. The experiment was arranged in a randomized complete block design consisting of eight mustard varieties (viz. BARI Sarisha-8, BARI Sarisha-11, BARI Sarisha-13, BARI Sarisha-14, BARI Sarisha-15, BARI Sarisha-16, Rai and Tori-7) as treatment and replicated thrice. All the growth, yield attributes and yield were substantially influence among the mustard varieties except the phenological parameters. Results of the experiment showed that the highest plant height (131.33 cm), seed yield (1813.33 kg ha-1) and stover yield (3876.67 kg ha-1) were found in BARI Sarisha-16. BARI Sarisha-11 was found better in respect of maximum siliqua plant-1, weight of seeds plant-1, 1000-seed weight and harvest index. Besides this, BARI Sarisha-14 showed the maximum number of seeds siliqua-1. Therefore, findings of this study suggested that BARI Sarisha-16 would be suitable for better productivity and recommended for cultivation in the medium highland of Khulna region of Bangladesh.

scholarly journals Source-sink manipulation on yield contributing characters and yield of Sesame (Sesamum indicum L.)

2018 ◽  
Vol 29 (1) ◽  
pp. 1-9
Author(s):  
MHK Howlader ◽  
SK Bain ◽  
MM Hasan ◽  
ABMMM Khan ◽  
S Biswas
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Development Stage ◽  
Capsule Wall ◽  
Yield Attributes ◽  
Traditional Variety ◽  
Randomized Complete Block Design ◽  
Two Factors ◽  
Source Sink

Source-sink manipulation may improve light interception into the canopy and reduce the competition between vegetative and reproductive sinks during seed filling period, and may help in achieving higher yield. So, an effort was made to assess the effect of source-sink manipulation on yield contributing characters and yield of sesame. The experiment was laid out in two factors randomized complete block design consisted of two varieties of sesame viz.Binatil-3 and Local-Black and five levels of source-sink manipulation viz.control (M0), removal of lower empty leaves, lower empty branches and top of the inflorescence (M1), removal of top of the inflorescence (M2), removal of all branches and removal of lower empty leaves (M3) and lower empty branches (M4) with three replications. Source-sink manipulations were imposed during capsule development stage (50 days after emergence). Results revealed that the higher number of capsules plant-1 (16.17), seeds capsule-1 (53.27), maximum 1000-seed weight (2.72 g), higher seed capsule wall ratio (2.52), seed yield plant-1 (2.35 g), yield (938.96 kg ha-1) and harvest index (36.40%) were produced by the modern variety Binatil-3 than the traditional variety Local-black. Source-sink manipulation showed positive response to yield attributes compared with control. Maximum seeds capsule-1 (57.13), 1000-seed weight (2.92 g), higher seed capsule wall ratio (2.71), seed yield plant-1 (2.78 g) and yield (1110.96 kg ha-1) were found from removal of lower empty leaves, lower empty branches and top of the inflorescence (M1). Yield was increased by 71.77%, 46.88%, 8.52% and 22.45% due to M1, M2, M3 andM4 manipulation. Although all the source-sink manipulation treatments gave higher yield in their respective variety, the highest (1258.63 kg ha-1 and 125.04%) yield was obtained when lower leaves, lower empty branches and top of the inflorescence of the variety Binatil-3 were removed i.e. from V1M1 treatment. Therefore, Binatil-3 with removal of lower empty leaves, lower empty branches and top of the inflorescence manipulation was the best treatment in respect of yield and yield contributing characters of sesame.Progressive Agriculture 29 (1): 1-9, 2018

scholarly journals Effect of sowing methods and weeding regimes on the yield of Sesame (Sesamum indicum L.)

2022 ◽  
Vol 8 (3) ◽  
pp. 291-299
Author(s):  
Afroza Khanam ◽  
Md Abdus Salam ◽  
Md Romij Uddin ◽  
Md Golam Rabbani ◽  
Shohrab Hoshain
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Yield Attributes ◽  
Free Treatment ◽  
Stover Yield ◽  
Biological Yield ◽  
Number Of Seeds ◽  
Number Of Branches

The experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University to observe the effect of sowing methods and weeding regimes on the yield of sesame. The experiment comprised of two factors. Two methods of sowing i.e., broadcasting and line sowing (S2), and six weeding regimes- control (T0), weed free (T1), one hand weeding at 15 DAS (T2), two hand weedings at 15 and 30 DAS (T3), three hand weedings at 15, 30 and 45 DAS (T4) and application of Panida (Pendimethalin) herbicide (T5) at 3 DAS. The experiment was laid out in a randomized complete block design (RCBD) with three replications. Almost all the yield characters of sesame were affected significantly due to sowing methods, weeding regime and their interaction. Result showed that the l ine sowing showed better performance regarding plant height (100.40 cm), number of branches (4.983) plant–1, number of capsules plant–1 (47.82), number of seeds capsule–1 (69.66), 1000–seed weight (2.96 g), seed yield (956.90 kg ha–1), stover yield (2167.0 kg ha–1), biological yield (3123.00 kg ha–1) and harvest index (31.45%) than that of broadcasting method. Also weed free treatment had the highest plant height (101.90 cm), highest number of branches (5.00) plant-1, highest capsule (47.08) plant–1, heaviest 1000–seed weight (3.28 g), highest number of seeds capsule–1 (76.22), highest seed yield (974.30 kg ha–1), stover yield (2947.0 kg ha–1) and biological yield (3922.0 kg ha–1) as compared to other treatments while unweeded plot had least significant effect among the whole yield and yield attributes of sesame. In case of interactions, both weed free treatment and herbicidal effect with line sowing methods produced the highest plant height, number of branches and capsules plant–1, seeds capsule–1, seed yield, stover yield and biological yield (109.80 cm, 5.967, 56.57, 81.53, 1054.0 kg ha–1, 3139.0 kg ha–1 and 4193.0 kg ha–1, respectively) as compared to other interaction combinations. The results of the study reveal that the weed free treatment along with line sowing would be the proper technique for higher production of sesame. But line sowing along with application of Panida herbicide would be the best combination for obtaining higher yield of sesame since it is not feasible for the farmers to keep their field weed free throughout all the growing periods. Res. Agric., Livest. Fish.8(3): 291-299, December 2021

scholarly journals Morphological characterization and association of various yield and yield contributing traits in Brassica genotypes

2019 ◽  
Vol 30 (1) ◽  
pp. 39-47
Author(s):  
T Aktar ◽  
M Nuruzzaman ◽  
MS Rana ◽  
MA Hossain ◽  
L Hassan
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Correlation Coefficients ◽  
Morphological Characters ◽  
Morphological Characterization ◽  
Early Maturity ◽  
Breeding Programs ◽  
Randomized Complete Block Design ◽  
Number Of Seeds

An experiment was conducted to evaluate eighteen Brassica genotypes for various morphological characters and estimate association for yield and yield contributing traits. The experimented was executed following Randomized complete block design (RCBD) with three replications in the experimental farm of the department of Genetics and Plant Breeding, Bangladesh Agricultural University Mymensingh-2202. The nine yield attributing characters are studied in the experiment. The genotypes differed significantly for all the traits viz., days to 1st flowering, days to maturity, plant height, number of branches/plant, number of pod/plant, length of pod, number of seeds/pod, 1000-seed weight (g) and seed yield/plant (g).Considering the two most important traits like early maturity and yield /plant, BD-7114 performed best among the studied genotypes. Correlation coefficients among the characters were studied to determine the association between yield and it attributing components. A significant positive correlation was found between yield and its attributing characters namely with number of seeds/pod and 1000-seed weight. Path analysis revealed both direct and indirect effects on seed yield and revealed that number of seeds/pod had the highest direct effect on seed yield. The findings of the research could be exploited in future breeding programs for improving Brassica genotypes. Progressive Agriculture 30 (1): 39-47, 2019

Canola seed yield and phenological responses to plant density

2016 ◽  
Vol 96 (1) ◽  
pp. 151-159 ◽  
Author(s):  
Gan Yantai ◽  
K. Neil Harker ◽  
H. Randy Kutcher ◽  
Robert H. Gulden ◽  
Byron Irvine ◽  
...  
Keyword(s):  
Seed Yield ◽  
Plant Density ◽  
Block Design ◽  
Positive Association ◽  
High Yield ◽  
Western Canada ◽  
Flowering Period ◽  
Canola Seed ◽  
Randomized Complete Block Design ◽  
Plant Densities

Optimal plant density is required to improve plant phenological traits and maximize seed yield in field crops. In this study, we determined the effect of plant density on duration of flowering, post-flowering phase, and seed yield of canola in diverse environments. The field study was conducted at 16 site-years across the major canola growing area of western Canada from 2010 to 2012. The cultivar InVigor® 5440, a glufosinate-resistant hybrid, was grown at five plant densities (20, 40, 60, 80, and 100 plants m−2) in a randomized complete block design with four replicates. Canola seed yield had a linear relationship with plant density at 8 of the 16 site-years, a quadratic relationship at 4 site-years, and there was no correlation between the two variables in the remaining 4 site-years. At site-years with low to medium productivity, canola seed yield increased by 10.2 to 14.7 kg ha−1 for every additional plant per square metre. Averaged across the 16 diverse environments, canola plants spent an average of 22% of their life cycle flowering and another 27% of the time filling seed post-flowering. Canola seed yield had a negative association with duration of flowering and a positive association with the days post-flowering but was not associated with number of days to maturity. The post-flowering period was 12.7, 14.7, and 12.6 d (or 55, 68, and 58%) longer in high-yield experiments than in low-yield experiments in 2010, 2011, and 2012, respectively. We conclude that optimization of plant density for canola seed yield varies with environment and that a longer post-flowering period is critical for increasing canola yield in western Canada.

scholarly journals Plant spacing and pollen quantity on yield and quality of squash seeds

2003 ◽  
Vol 21 (3) ◽  
pp. 443-447 ◽  
Author(s):  
Márcio S. de Lima ◽  
Antonio I. I. Cardoso ◽  
Marcelo F. Verdial
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Block Design ◽  
Fruit Production ◽  
Plant Spacing ◽  
Plant Seed ◽  
Yield And Quality ◽  
Randomized Complete Block Design ◽  
Pollen Quantity

Squash seeds yield and quality can be improved by proper population plant spacing and the pollen quantity, which influences the pollination quality and fertilization. Nine experiments were conducted as a factorial combination of three spacing between plants (0.8 x 0.3, 0.8 x 0.6 and 0.8 x 0.9 m), two quantities of pollen (50% of an anther and another entire one) and natural insect pollination. Seed and fruit production parameters, and seed quality were evaluated. A randomized complete block design, five replications, with ten plants per plot was adopted. Larger plant spacing increased the average number of mature fruits and seed yield per plant. Seed yield was directly proportional to the amount of pollen used during pollination. Higher amounts of pollen resulted in higher seed yield per area, but the plant spacing did not affect this characteristic. Manual pollination, using a whole anther, did not differ from natural pollination in relation to seed yield and quality.

scholarly journals Effect of Nitrogen Fertilizer and Fruit Positions on Fruit and Seed Yields of Okro (Abelmoschus Esculentus L. Moench)

2016 ◽  
Vol 6 (1) ◽  
pp. 39
Author(s):  
Y. Zubairu ◽  
J. A. Oladiran ◽  
O. A. Osunde ◽  
U. Ismaila
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Mother Plant ◽  
Nitrogen Levels ◽  
N Level ◽  
University Of Technology ◽  
Randomized Complete Block Design ◽  
Cropping Seasons ◽  
Seed Yields

Study was conducted in 2006 and 2007 cropping seasons at the experimental field of Federal University of Technology, Minna (9o 401N and 6o 301E), in the Southern Guinea Savanna of Nigeria to determine the effects of N fertilizer and the fruit positions on fruit and seed yield of okro. The treatment comprised factorial combination of five nitrogen levels (0, 30, 60, 90 and 120 kg/ha) and five fruit positions on a mother-plant (3, 5, 7, 9 and 10) which were replicated three times and laid in a Randomized Complete Block Design (RCBD). The results indicated that significant taller plants were recorded in the plots that received 120 kg N/ha while shorter plants were recorded in plots that received 0 N/ha in both years of the study. The higher N level of 120 kg/ha and lower fruit position of 3 significantly gave higher number of fruit yield while the yield decreased with decrease in N level and increase in fruit position on the mother-plant. Similarly, heavier fruits were recorded in lower fruit positions and higher N levels. The fruits formed at the lower position 3 and 5 produced more seeds with higher seed weight than those formed at the higher positions. The results also showed that significantly higher seed yield was recorded at N level of 120 kg/ha ?.

scholarly journals Effect of spacing and fertilizer management on the yield and yield attributes of mukhikachu (Colocasia esculenta Schott.)

2016 ◽  
Vol 41 (4) ◽  
pp. 713-723
Author(s):  
S Akther ◽  
F Ahmed ◽  
MR Islam ◽  
MA Hossen ◽  
AHMM Rahman Talukder
Keyword(s):  
Field Experiments ◽  
Block Design ◽  
Recommended Dose ◽  
Cost Ratio ◽  
Plant Spacing ◽  
Yield Attributes ◽  
Benefit Cost Ratio ◽  
Maximum Benefit ◽  
Randomized Complete Block Design ◽  
Benefit Cost

Field experiments were carried out in the Agronomy field of BARI, Joydebpur, RARS, Jamalpur and RARS, Ishurdi during two consecutive kharif seasons of 2012 and 2013 to determine the suitable plant spacing and optimum fertilizer dose for higher yield of mukhikachu. Three levels of spacing viz., 60 cm x 60 cm, 60 cm x 45 cm and 60 cm x 30 cm and three levels of fertilizer dose viz., recommended dose (3000-96-27-81-18 kg ha-1 of CD-N-P-K-S), 25% less than the recommended dose and 25% higher than the recommended dose were used as treatment variables. The experiments were laid out in factorial randomized complete block design with three replications. Results revealed that the closer spacing (60 cm x 30 cm) in combination with 25% higher than the recommended fertilizer dose gave the maximum edible yield of mukhikachu (two years average) at all locations (20.04 t ha-1, 20.75 t ha-1 and 16.63 t ha-1 at Joydebpur, Jamalpur and Ishurdi, respectively). The wider spacing (60 cm x 60 cm) coupled with 25% less than the recommended fertilizer dose produced the lowest yield (two years average). The maximum benefit- cost ratio (two years average) was obtained from the combination of the recommended fertilizer dose and 60 cm x 30 cm spacing, that were 2.93 at Joydebpur and 3.42 at Ishurdi, while at Jamalpur the maximum benefit-cost ratio (two years average) was found maximum from 60 cm x 30 cm spacing with 25% higher than the recommended fertilizer dose (3.12).Bangladesh J. Agril. Res. 41(4): 713-723, December 2016

scholarly journals Effect of Iron on Yield of Corn (Zea mays L.) in Drought Stress

2019 ◽  
Vol 52 (1) ◽  
pp. 34-43
Author(s):  
K. Rafsanjani ◽  
A. Madani ◽  
F. Vazin
Keyword(s):  
Drought Stress ◽  
Seed Yield ◽  
Arid Regions ◽  
Block Design ◽  
Control Treatment ◽  
Yield Reduction ◽  
Pan Evaporation ◽  
Randomized Complete Block Design ◽  
Four Levels ◽  
Number Of Seeds

Abstract In hot and arid regions, drought stress is considered as one of the main reasons for yield reduction. To study the effect of drought stress, iron spray on the yield and yield components of corn, an experiment was carried out during the crop seasons of 2013 on research Farm in Faizabad of Iran, as a split plot within randomized complete block design with three replications. The main plots with irrigation factor and four levels were considered: level A) 50 ml evaporation from pan evaporation; level B) 100 ml evaporation from pan evaporation; level C) 150 ml evaporation from pan evaporation and level D) 200 ml evaporation from pan evaporation. Sub plots were considered with iron spray in three levels, included level A) 80 g/ha, level B) 130 g/ha and level C) 180 g/ha. The drought stress reduced seed yield, the 1000-kernels weight (TKW), the number of seeds per ear, the number of seeds per row in ear, the number of rows per ear about 39%, 6%, 31%, 14% and 27% less than control treatment, respectively. Using iron, as compared with control treatment, causes the increase of 1000-kernels weight from 295 to 311 g and the increase of seed yield from 5188 to 7078. The results obtained from the present research showed that iron spray has fairly improved the effects caused by drought stress.

scholarly journals Impact of foliar nutrient sprays, crop and spatial manipulation on seed yield of Callistephus chinensis (L.) Nees

2019 ◽  
Vol 48 (1) ◽  
pp. 123-127
Author(s):  
Muneeb Ahmad Wani ◽  
Ambreena Din ◽  
FU Khan ◽  
Raiz Ahmed Lone ◽  
Gazanfer Gani ◽  
...  
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Quality Parameters ◽  
Planting Density ◽  
Apical Bud ◽  
Yield And Quality ◽  
Foliar Nutrient ◽  
Plant Densities ◽  
China Aster

An attempt was made to study the effect of pinching, plant densities and foliar nutrient sprays on seed yield and quality parameters in China aster cv. Powder puff. The experiment comprised of two levels of pinching (P0 = No pinching, P1 = Pinching), three planting densities (D1 = 30 plants m-2, D2 = 36 plants m-2 and D3 = 42 plants m-2) and three levels of commercial nutrient sprays (S1= 3 sprays, S2= 4 sprays and S3 = 5 sprays), constituting a total of 18 treatment combinations replicated thrice in randomized complete block design (RCBD). Pinching at visible bud stage, significantly increased 1000 seed weight (2.18 g) and seed yield (490.85 kg/ha), Increasing the planting density resulted in increased seed yield (485.55 kg/ha) and 1000 seed weight (2.05 g). On the other hand, 4 and 5 nutrient sprays significantly improved seed yield (463.12 kg/ha-) and 1000 seed weight (1.95 g). The results from the study suggest that increased branching with apical bud removal, wider planting space and 4 to 5 foliar applications of multi-nutrient sprays, significantly improves seed yield and quality attributes of transplanted China aster. While suggesting the best combination of pinching, spacing and nutrient sprays, the economics of flower production was duly considered.

Sign in / Sign up

Export Citation Format

Share Document