scholarly journals Isolation and Characterization of Lignin from Tropical and Temperate Hardwood

2010 ◽  
Vol 44 (3) ◽  
pp. 271-280 ◽  
Author(s):  
M Sarwar Jahan ◽  
Sung Phil Mun
Keyword(s):  
Molecular Weight ◽  
Average Molecular Weight ◽  
13C Nmr Spectroscopy ◽  
Hydroxyl Group ◽  
Molecular Weight Determination ◽  
Dioxane Lignin ◽  
Tropical Hardwood ◽  
Isolation And Characterization ◽  
Trema Orientalis

Dioxane and milled wood lignins (MWL) were isolated from tropical hardwood, Nalita (Trema orientalis) and temperate hardwood, aspen. These lignins were characterized by UV, FTIR, 1H-NMR and 13C-NMR spectroscopy, alkaline nitrobenzene oxidation, molecular weight determination, elemental and methoxyl analysis. The structural analysis revealed that Nalita and aspen lignin is syringyl-guaiacyl type. Aspen lignin had higher syringyl unit than Nalita lignin. The β-O-4 type linkages are the main interunit linkages and more abundant in aspen than Nalita. Dioxane lignin showed higher free phenolic hydroxyl group than MWL in both species. The weight average molecular weight of aspen lignin was lower than that of Nalita lignin. Nalita and aspen lignins contained both erythro and threo configuration, but erythro proton gave stronger peak. A UV absorption maximum of aspen lignin was at 274 nm, whereas it was shifted to 280 nm for Nalita lignin. Keywords: Trema orientalis, Aspen, Dioxane lignin, Milled wood lignin, Syringyl-guaiacyl, β-O-4 linkages DOI: 10.3329/bjsir.v44i3.4399 Bangladesh J. Sci. Ind. Res. 44(3), 271-280, 2009

Isolation and characterization of the principal caseins in rat milk

1980 ◽  
Vol 47 (1) ◽  
pp. 97-102 ◽  
Author(s):  
Jean-Pierre Pelissier ◽  
Ahmed Yahia ◽  
Jean-Marc Chobert ◽  
Bruno Ribadeau Dumas
Keyword(s):  
Molecular Weight ◽  
Amino Acid ◽  
Molecular Weight Determination ◽  
Terminal Sequence ◽  
Sequence Determination ◽  
Sialic Acid Content ◽  
Isolation And Characterization ◽  
The Individual ◽  
Similar Peptide

SummaryThe 4 major caseins, A1, A2, B1, B2, from rat milk have been isolated and analysed. From molecular weight determination, amino acid and phosphorus analyses and N-terminal sequence determination, A1 and A2 are concluded to possess similar peptide chains as do B1 and B2, with the individual fractions within each of these 2 groups differing only in their sialic acid content.Mol. wts of approximately 22000 and 38000 were found for A1–A2 and B1–B2 respectively. The amino acid sequence of the first 13 residues of A1–A2 has been partly established. Components A1 and A2 appeared to be homologous with bovine β-casein, whereas B1 and B2 were different from any known casein, especially in their molecular weight.

Synthesis and characterization of poly(coumarin-urethane)s

1994 ◽  
Vol 6 (3) ◽  
pp. 257-262
Author(s):  
D I Brahmbbatt ◽  
L Jayabalan ◽  
Harshad D Patel
Keyword(s):  
Molecular Weight ◽  
Elemental Analysis ◽  
Vapour Pressure ◽  
Condensation Reaction ◽  
Average Molecular Weight ◽  
Spectral Studies ◽  
Synthesis And Characterization ◽  
Molecular Weight Determination ◽  
Number Average Molecular Weight

Poly(coumarin-urethane)s (PCUs) were prepared by the condensation reaction of 3,3'-dihydroxy-6,6'-methylcnebiscoumarin (DHMBC) with various diisocyanates. All the poly(coumarin-urethane)s were characterized by elemental analysis, IR spectral studies, number average molecular weight determination (by vapour pressure osmometry), viscosity studies and thermogravimetry.

Isolation and Characterization of Plasminogen Activator from Pig Leucocytes

1974 ◽  
Vol 31 (01) ◽  
pp. 072-085 ◽  
Author(s):  
M Kopitar ◽  
M Stegnar ◽  
B Accetto ◽  
D Lebez
Keyword(s):  
Molecular Weight ◽  
Plasminogen Activator ◽  
Gel Electrophoresis ◽  
Gel Filtration ◽  
Ph Optimum ◽  
Isolation And Characterization ◽  
Ph Range ◽  
Inhibition Studies ◽  
Final Purification

SummaryPlasminogen activator was isolated from disrupted pig leucocytes by the aid of DEAE chromatography, gel filtration on Sephadex G-100 and final purification on CM cellulose, or by preparative gel electrophoresis.Isolated plasminogen activator corresponds No. 3 band of the starting sample of leucocyte cells (that is composed from 10 gel electrophoretic bands).pH optimum was found to be in pH range 8.0–8.5 and the highest pH stability is between pH range 5.0–8.0.Inhibition studies of isolated plasminogen activator were performed with EACA, AMCHA, PAMBA and Trasylol, using Anson and Astrup method. By Astrup method 100% inhibition was found with EACA and Trasylol and 30% with AMCHA. PAMBA gave 60% inhibition already at concentration 10–3 M/ml. Molecular weight of plasminogen activator was determined by gel filtration on Sephadex G-100. The value obtained from 4 different samples was found to be 28000–30500.

Preparation and Characterization of the High Molecular Weight [3H]Hyaluronic Acid

1992 ◽  
Vol 57 (10) ◽  
pp. 2151-2156 ◽  
Author(s):  
Peter Chabreček ◽  
Ladislav Šoltés ◽  
Hynek Hradec ◽  
Jiří Filip ◽  
Eduard Orviský
Keyword(s):  
Molecular Weight ◽  
Hyaluronic Acid ◽  
High Molecular Weight ◽  
Methyl Bromide ◽  
High Performance ◽  
Hydrogen Atoms ◽  
Isolation And Characterization ◽  
Labelling Procedure ◽  
Enzymatic Depolymerization

Two methods for the preparation of high molecular weight [3H]hyaluronic acid were investigated. In the first one, hydrogen atoms in the molecule were replaced by tritium. This isotopic substitution was performed in aqueous solution using Pd/CaCO3 as the catalyst. In the second method, the high molecular weight hyaluronic acid was alkylated with [3H]methyl bromide in liquid ammonia at a temperature of -33.5 °C. High-performance gel permeation chromatographic separation method was used for the isolation and characterization of the high molecular weight [3H]hyaluronic acid. Molecular weight parameters for the labelled biopolymers were Mw = 128 kDa, Mw/Mn = 1.88 (first method) and Mw = 268 kDa, Mw/Mn = 1.55 (second method). The high molecular weight [3H]hyaluronic acid having Mw = 268 kDa was degraded further by specific hyaluronidase. Products of the enzymatic depolymerization were observed to be identical for both, labelled and cold biopolymer. This finding indicates that the described labelling procedure using [3H]methyl bromide does not induce any major structural rearrangements in the molecule.

scholarly journals Characterization of a Novel Fructosyltransferase from Lactobacillus reuteri That Synthesizes High-Molecular-Weight Inulin and Inulin Oligosaccharides

2002 ◽  
Vol 68 (9) ◽  
pp. 4390-4398 ◽  
Author(s):  
S. A. F. T. van Hijum ◽  
G. H. van Geel-Schutten ◽  
H. Rahaoui ◽  
M. J. E. C. van der Maarel ◽  
L. Dijkhuizen
Keyword(s):  
Molecular Weight ◽  
High Molecular Weight ◽  
Lactobacillus Reuteri ◽  
Bacterial Strains ◽  
Potential Health ◽  
Isolation And Characterization ◽  
A Cell ◽  
Encoding Gene ◽  
First Time

ABSTRACT Fructosyltransferase (FTF) enzymes produce fructose polymers (fructans) from sucrose. Here, we report the isolation and characterization of an FTF-encoding gene from Lactobacillus reuteri strain 121. A C-terminally truncated version of the ftf gene was successfully expressed in Escherichia coli. When incubated with sucrose, the purified recombinant FTF enzyme produced large amounts of fructo-oligosaccharides (FOS) with β-(2→1)-linked fructosyl units, plus a high-molecular-weight fructan polymer (>107) with β-(2→1) linkages (an inulin). FOS, but not inulin, was found in supernatants of L. reuteri strain 121 cultures grown on medium containing sucrose. Bacterial inulin production has been reported for only Streptococcus mutans strains. FOS production has been reported for a few bacterial strains. This paper reports the first-time isolation and molecular characterization of (i) a Lactobacillus ftf gene, (ii) an inulosucrase associated with a generally regarded as safe bacterium, (iii) an FTF enzyme synthesizing both a high molecular weight inulin and FOS, and (iv) an FTF protein containing a cell wall-anchoring LPXTG motif. The biological relevance and potential health benefits of an inulosucrase associated with an L. reuteri strain remain to be established.

Study on the Preparation and Characterization of Carboxyl Terminated Poly(L-Lactic Acid) (PLLA) Prepolymers

2017 ◽  
Vol 872 ◽  
pp. 165-170
Author(s):  
Shi Chao Lu ◽  
Yang Chuan Ke ◽  
Qian Zhou ◽  
Zhao Rui Meng ◽  
Guo Liang Zhang ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Lactic Acid ◽  
Average Molecular Weight ◽  
Polymerization Temperature ◽  
Capping Agent ◽  
Molar Amount ◽  
Optimum Reaction ◽  
Catalyst Content ◽  
End Capping

The carboxyl terminated poly (L-lactic acid) (PLLA) prepolymers were prepared via polycondensation of L-lactic acid and 1,6-adipic acid (end capping agent) under the catalyst of stannous octoate. The effects of synthetic condition, such as reaction temperature, amount of catalyst, content of the end capping agent, etc, on the molecular weight of PLLA were discussed. Fourier transform infrared and 1H nuclear magnetic resonance were used to characterize the PLLA prepolymers. The results indicated that the polycondensation was performed under an optimum reaction condition as following: the amount of the catalyst was 500 ppm based on the mass of lactic acid, the amount of the end capping agent was 1% (the molar amount of the lactic acid), and the polymerization temperature was 170 °C. The viscosity-average molecular weight of the product reached 2.826×104 at this polymerization temperature and the yield was 73.34%.

Sign in / Sign up

Export Citation Format

Share Document