scholarly journals Histological and X-ray structural analysis of the conditionof the bone tissue of the jaws with direct and delayed implantation using implants with different surface microstructures

2021 ◽  
Vol 108 (4) ◽  
pp. 24-32
Author(s):  
P. Grishin ◽  
◽  
E. Mamaeva ◽  
E. Kalinnikova ◽  
E. Kushner ◽  
...  
Keyword(s):  
Structural Analysis ◽  
Key Words ◽  
Bone Tissue ◽  
Animal Experiment ◽  
Histological Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Delayed Implantation ◽  
Surface Microstructures ◽  
Bone Condition

Abstract. This article presents the results of histological and X-ray studies of bone condition, stability, and degree of osteointegration of implants with different microstructure of the surface during immediate and delayed implantation in the animal experiment. The results of the study did not reveal significant differences in the process of osteointegration during direct and delayed implantation. Data from histological and X-ray studies of direct implantation in fresh extraction holes are comparable to those obtained during delayed implantation and are not inferior to the traditional two-stage protocol. At the same time, a certain correlation between the type of surface of the implant and the time of its adaptation in different periods of the experiment was revealed. When using an implant with an innovative surface, HSTTM. The process of osteointegration is mor clear, and the bone wall of the hole is more compacted, which indicates an accelerated and successful process of osteointegration. Key words: X-ray diffraction, frequency resonance and histological analysis, fibrous capsule, collagen fibers, trabeculae, bone tissue, periotestometry osseointegration, stability.

scholarly journals Hydroxyapatite-lignin composite as a metallic implant-bone tissue osseointegration improver: experimental study in dogs

2015 ◽  
Vol 46 (2) ◽  
pp. 324-329 ◽  
Author(s):  
Fabrício Luciani Valente ◽  
Letícia Corrêa Santos ◽  
Rodrigo Viana Sepúlveda ◽  
Gustavo Pereira Gonçalves ◽  
Renato Barros Eleotério ◽  
...  
Keyword(s):  
Bone Tissue ◽  
Statistical Difference ◽  
Histological Analysis ◽  
Control Group ◽  
X Ray Diffraction ◽  
Metal Implant ◽  
X Ray ◽  
Marrow Cavity ◽  
Biomechanical Assessment ◽  
Tissue Integration

The study aimed to evaluate biocompatibility, osteoconduction and osseointegration of a pasty composite of hydroxyapatite (20%) and lignin (80%) as a promoter of metal implant and bone tissue integration. An intramedullary Schanz pin was implanted in both tibias of fifteen bitches. In the left tibia, the pin was coated with the biomaterial at the time of surgery. Marrow cavity was also filled with the biomaterial. Right limb did not receive the biomaterial, then constituting the control group. Tibias were harvested from five animals at 8, 60 and 150 days after surgery; three of them were analyzed by histological and biomechanical assessment and the two remaining tibias by X-ray diffraction. Results showed that the biomaterial is biocompatible, with osteoconductivity and osseointegration properties. Histological analysis and diffractograms showed the presence of hydroxyapatite in samples in all periods, although the presence of organic material of low crystallinity was variable. There was no statistical difference in the forces required for removal of the biocompatibility, osteoconductivity and osseointegration, it was not able to promote a better intramedullary pin anchorage.

RNA polymerase: Preparation and structural analysis of helical polymers

1984 ◽  
Vol 42 ◽  
pp. 152-153
Author(s):  
E. Loren Buhle ◽  
Pamela Rew ◽  
Ueli Aebi
Keyword(s):  
Structural Analysis ◽  
Rna Polymerase ◽  
Molecular Level ◽  
X Ray Diffraction ◽  
Helical Polymers ◽  
X Ray ◽  
E Coli ◽  
The Past ◽  
Ordered Arrays ◽  
Low Ionic Strength

While DNA-dependent RNA polymerase represents one of the key enzymes involved in transcription and ultimately in gene expression in procaryotic and eucaryotic cells, little progress has been made towards elucidation of its 3-D structure at the molecular level over the past few years. This is mainly because to date no 3-D crystals suitable for X-ray diffraction analysis have been obtained with this rather large (MW ~500 kd) multi-subunit (α2ββ'ζ). As an alternative, we have been trying to form ordered arrays of RNA polymerase from E. coli suitable for structural analysis in the electron microscope combined with image processing. Here we report about helical polymers induced from holoenzyme (α2ββ'ζ) at low ionic strength with 5-7 mM MnCl2 (see Fig. 1a). The presence of the ζ-subunit (MW 86 kd) is required to form these polymers, since the core enzyme (α2ββ') does fail to assemble into such structures under these conditions.

Structural analysis by X-ray diffraction of a non-polar alkenyl liquid crystalline compound

1996 ◽  
Vol 20 (6) ◽  
pp. 765-770 ◽  
Author(s):  
A. Nath ◽  
S. Gupta ◽  
P. Mandal ◽  
S. Paul ◽  
H. Schenk
Keyword(s):  
Structural Analysis ◽  
Liquid Crystalline ◽  
Crystalline Compound ◽  
X Ray Diffraction ◽  
X Ray ◽  
Liquid Crystalline Compound

scholarly journals X-ray Diffraction: A Powerful Technique for the Multiple-Length-Scale Structural Analysis of Nanomaterials

Crystals ◽  
2016 ◽  
Vol 6 (8) ◽  
pp. 87 ◽  
Author(s):  
Cinzia Giannini ◽  
Massimo Ladisa ◽  
Davide Altamura ◽  
Dritan Siliqi ◽  
Teresa Sibillano ◽  
...  
Keyword(s):  
Structural Analysis ◽  
Length Scale ◽  
X Ray Diffraction ◽  
X Ray ◽  
Powerful Technique ◽  
Multiple Length Scale

Crystal structures of highly stabilized ylides: methyl(3-methoxy,2-methoxycarbonylbenzoyl) triphenyl- phosphoranylideneacetate and methyl(2-methoxycarb-6-nitrobenzoyl)triphenyl phos phoranyl ideneacetate and the salt methyl(triphenylphosphoranylidene)acetate tetrafluoroborate

1998 ◽  
Vol 76 (12) ◽  
pp. 1844-1852
Author(s):  
Fernande D Rochon ◽  
Robert Melanson ◽  
Margaret M Kayser
Keyword(s):  
Key Words ◽  
Crystal Structures ◽  
Nitro Derivative ◽  
Transient Species ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ionic Salt ◽  
Higher Temperature ◽  
Cyclic Anhydrides ◽  
Wittig Reactions

At lower temperatures stabilized ylides react with unsymmetrically substituted phthalic anhydrides to give two acyclic adducts. When the reactions are allowed to proceed at higher temperature enol lactones are formed. Identification of the acyclic intermediates was necessary to understand the mechanism of these Wittig reactions. The transient species trapped in the reaction with trimethyloxonium tetrafluoroborate were unambiguously identified by crystallographic methods. The crystal structures of the tetrafluoroborate salt of methyl(triphenylphosphoranyl idene)- acetate (8), methyl(3-methoxy,2-methoxycarbonylbenzoyl)triphenylphosphoranylideneacetate (6β), and methyl(2-methoxycarbonyl,6-nitrobenzoyl)triphenylphosphoranylideneacetate (7α) were studied by X-ray diffraction. The ionic salt (8) is monoclinic, P21c,a= 12.640(5), b = 13.945(9), c = 14.825(6) Å, β = 125.32(3)°, Z = 4, and R = 0.065 (F >5.4 σ(F)). Crystal 6 β is monoclinic, P21c,a = 16.391(16), b = 9.029(6), c = 19.835(19) Å, β = 116.60(6)°, Z = 4, and R = 0.070 (F > 4.6 σ(F)), while crystal 7α is also monoclinic, P21c,a = 9.513(5), b = 9.361(3), c = 30.908(13) Å, β = 98.42(3)°, Z = 4, and R = 0.057 (F >5 σ(F)). In the BF 4- salt (12), the four P-C distances are equal (1.791(5)-1.801(7) Å) with identical tetrahedral angles. For the two triphenylphosphoranylideneacetate compounds, the fourth P-C(1) bond is shorter (1.762(6)-1.734(5) Å) than the three P-C(Ph) bonds (avg. 1.809(5) Å). The angles C(1)-P-C(Ph) are also larger (avg. 112.9(2)° for 6β and 111.9(2)° for 7α) than the C(Ph)-P-C(Ph) angles (avg. 105.8(2)° for 6 β and 106.9(2)° for 7α). These values suggest a multiple nature for the P-C(1) bond. In the nitro derivative, the nitro and the ester groups are disordered equally in positions 2 and 6. Key words: Wittig reactions, cyclic anhydrides, stabilized ylide, phosphoranylidenes, crystal structures.

Synthesis, Structural, Morphological and I-V Characteristics of Polyaniline-MgCl Composite

2022 ◽  
Vol 1048 ◽  
pp. 141-146
Author(s):  
Madihally Nagaraja ◽  
Geetha Thippeswamy ◽  
Sushma Prashanth ◽  
Jayadev Pattar ◽  
Mahesh Hampapatna Mahesh
Keyword(s):  
Structural Analysis ◽  
Oxidative Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sem Micrographs ◽  
Morphological Studies ◽  
Current Voltage ◽  
Amorphous Nature ◽  
Diffraction Patterns ◽  
Polymerization Method

Composite of polyaniline-MgCl has been synthesized using oxidative polymerization method. Synthesized samples were characterized for structural analysis using FTIR and XRD. Morphological studies were carried by SEM micrographs. Current-Voltage (I-V) properties are obtained through Kiethly source meter. FTIR spectrum of polyaniline-MgCl composite indicates all the characteristic peaks of polyaniline. X-ray diffraction patterns represented the amorphous nature of polyaniline-MgCl composite. SEM micrographs confirmed the presence of MgCl particles in polyaniline matrix. I-V characteristics have shown the ohmic type behavior of polyaniline and polyaniline-MgCl composite.

Sign in / Sign up

Export Citation Format

Share Document