Light Dependence Resistor Used as a Sensor for a Solar Tracker

2015 ◽  
Vol 2 (1) ◽  
pp. 29-34
Author(s):  
Yohanes Climacus Sutama ◽  
Houtman P. Siregar ◽  
Dedy Loebis
Keyword(s):  
Electronic Circuit ◽  
Tracking System ◽  
Solar Panel ◽  
Sensor Output ◽  
Mechatronic System ◽  
Light Dependence ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Panel Surface ◽  
Mechanical Movement

This research focuses on a sensor that is suitable for solar tracking. In tracking system, solar panel harvests energyoptimally if the panel surface position is perpendicular to the light direction. To constructs mechatronic system, theselection of sensor is very important. Datasheet is helpful for pre selection. Further research has been carried out todetermine the specific sensor which will be mounted into electronic circuit. Based on the experiment on selectedsensor, sensor characteristic is obtained in detail. Sensor output is processed in the microprocessor. At the end, anactuator has a task to swap desired mechanical movement which is instructed by controller. Actuator must fulfilltechnical requirements, such as load, speed, durability, price, availability and maintenance aspect. This papergives an overview to answer this problem.

Design and Performance Analysis of Automatic Solar Tracking System

2015 ◽  
Vol 793 ◽  
pp. 353-357
Author(s):  
F.S. Abdullah ◽  
H.M. Nuhafiz ◽  
O. Mardianaliza ◽  
A. Yusof ◽  
Noor Anida
Keyword(s):  
Performance Analysis ◽  
Power Supply ◽  
Electronic Circuit ◽  
Tracking System ◽  
Solar Panel ◽  
Solar Irradiation ◽  
Dc Motors ◽  
Solar Tracking ◽  
Solar Tracker ◽  
And Performance

Solar tracker is a device that detects the movement of the sun. Solar tracker receive maximum sun ray in order to produce the maximum power supply by the photovoltaic (PV) panels system. It also depends on the environment factor such as solar irradiation and temperature of the panels. This paper presents the development of the automatic solar tracking system, the construction of the sensor circuit, programming of the control system and also its performance analysis. This automatic solar tracking system is designed with an electronic circuit control using PIC that can trigger the dc motors when the LDR sensors detect sunlight. DC motor will move vertical and 360 ̊ horizontal to increase efficiency of sunlight to the solar panel. Solar panel for the project gets power supply from the battery. The battery will be charged using power from the solar panel.

scholarly journals Development of Solar Powered Sprinkler Robot Based on Watering Plant Using IOT Approach

2021 ◽  
Vol 2107 (1) ◽  
pp. 012024
Author(s):  
Lim Xin You ◽  
Nordiana Shariffudin ◽  
Mohd Zamri Hasan
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
System Analysis ◽  
Tracking System ◽  
Sprinkler System ◽  
Solar Panel ◽  
Maximum Efficiency ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Solar Powered

Abstract Nowadays, solar energy’s popularity is growing consistently every year, along with the growth of amazing solar technologies, which is considered to be one of the most popular. Non-renewable energy like petrol and gasoline is being replaced with solar energy, which is renewable energy. The main objective of this project is to design and simulate a robot solar system. The robot is developed using Arduino Mega 2560 as the main brain of the system. This system is equipped with a solar tracking system to track the movement of the sun and LDR is used to detect the presence of sunlight. The solar tracker is used to get the maximum efficiency of solar energy and reduce power losses. In addition, the solar tracker can rotate from 0° - 180°, which is the best angle for the solar panel to reach the sunlight. This robot will be attached to the sprinkler system to perform the watering process. This robot is developed for use in the agriculture field to reduce the manpower and cost of the watering process. Three analyses will be conducted in this project such as solar panel analysis, Wi-Fi connectivity analysis and sprinkler system analysis. The result shows the solar panel will gain the highest intensity of the sunlight at 12.00 pm and a sunny day compared to the other time and a cloudy day. The maximum range of Wi-Fi connectivity and the water pump, time used to finish the watering process and watering area will be discussed.

scholarly journals Electric Power Optimizing Of Solar Panel SystemThrough Solar Tracking Implementation; A Case Study in Pekanbaru

INSIST ◽  
2019 ◽  
Vol 2 (2) ◽  
pp. 81
Author(s):  
Adhy Prayitno ◽  
Muhammad Irvan ◽  
Sigit Nurharsanto ◽  
Wahyu Fajar Yantoa
Keyword(s):  
Electric Power ◽  
Power Output ◽  
Tracking System ◽  
Incident Light ◽  
Electrical Power ◽  
Solar Panel ◽  
Electric Power Output ◽  
Solar Tracking ◽  
Panel Surface ◽  
Electrical Power Output

Observations and measurements have been conducted towards a solar panel electric power output that is utilized by a solar tracking system. The electrical power output depends on the position of the sun and time and the direction of the panel surface against the angle of the incident light. For power optimization, the solar panel surface should always be directed perpendicular to the direction of the sunlight falling to the surface of the panel. The application of the solar tracking system controlled by a micro controller gives the expected results. The electrical power output of a static solar panel mounted on a fixed position becomes the benchmark of the output electric power value in this study. The measurement results of the electric power output of the solar panel with sun tracking system shows a significant increase in sunny weather conditions.The average increase of that is about 57.3%.Keywords: LDR, micro controller, optimal power output, performance improvment, sun tracking,

scholarly journals A New Design Arduino-Based Dual Axis Solar Tracking System

2020 ◽  
Vol 4 (2) ◽  
Author(s):  
Yasir Hashim Naif
Keyword(s):  
High Efficiency ◽  
Tracking System ◽  
Electrical Power ◽  
Hardware Design ◽  
Clean Energy ◽  
Solar Panel ◽  
Solar Tracking ◽  
C Programming ◽  
Solar Tracker ◽  
Two Stages

Green and clean energy depends meanly on the Solar energy, especially at urban area. This paper presents the Arduino-based new design of dual-axis solar tracking system with high-efficiency using through the use of five-point sunlight sensors. The main objective of this research is to convert the maximum sunlight to electrical power by auto movement of the solar panel. This research is divided into two stages, first stage related to hardware design and the second related to software development. In hardware design, five light dependent resistors (LDR) have been used for tracking light direction source. Two linear actuators have been used to move the solar panel towards the maximum light intensity direction by using LDR sensors. Moreover, the software is constructed using C++ programming language and uploaded to the Arduino UNO platform. The efficiency of the designed tracking system has been examined and compared with fixed and single axis solar tracker and results shows that the new system has better efficiency than the fixed or single axis  system.

scholarly journals Horizontal Single Axis Solar Tracker Using Arduino Approach

2018 ◽  
Vol 12 (2) ◽  
pp. 489 ◽  
Author(s):  
Siti Amely Jumaat ◽  
Adam Afiq Azlan Tan ◽  
Mohd Noor Abdullah ◽  
Nur Hanis Radzi ◽  
Rohaiza Hamdan ◽  
...  
Keyword(s):  
Design Methodology ◽  
Tracking System ◽  
Maximum Energy ◽  
Solar Panel ◽  
Servo Motor ◽  
Time Intervals ◽  
Maximum Light ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Current Value

<span lang="EN-MY">This project discusses on the development of horizontal single axis solar tracker using Arduino UNO which is cheaper, less complex and can still achieved the required efficiency. For the development of horizontal single axis solar tracking system, five light dependent resistors (LDR) has been used for sunlight detection and to capture the maximum light intensity. A servo motor is used to rotate the solar panel to the maximum light source sensing by the light dependent resistor (LDR) in order to increase the efficiency of the solar panel and generate the maximum energy. The efficiency of the system has been tested and compared with the static solar panel on several time intervals. A small prototype of horizontal single axis solar tracking system will be constructed to implement the design methodology presented here. As a result of solar tracking system, solar panel will generate more power, voltage, current value and higher efficiency. </span>

scholarly journals Design and Programming of a Micro-Controller-Based Solar Tracking System

2020 ◽  
Author(s):  
Saman Sarkawt Jaafar ◽  
Farhad Muhsin Mahmood
Keyword(s):  
Tracking System ◽  
Solar Panel ◽  
The Sun ◽  
Servo Motor ◽  
Solar Tracking ◽  
Photo Sensor ◽  
Output Efficiency ◽  
Solar Tracker ◽  
Photo Voltaic ◽  
Two Sides

This paper is regarding design and program an Micro-controller Arduino Uno board by using Arduino software to work as a photo-sensor(Active) single axial solar tracker system(SASTS). A solar panel, two photo-resistors (LDR) in two sides (north/south) of the photo-voltaic(PV) and a servo motor are connected to the Uno board, which is running a code that prepared by Arduino software IDE in advanced then it works as a tracking system. Here, the LDRs send the signal of presence or absence of the light to the board and based on that sent signal the Uno reflects a new signal to the servo motor to rotate and finds the light source. Lastly, the photo-sensor single axis tracker is made while Continuously, the system tries to face the panel to the sun and whilst changing the irradiance intensity it starts searching to find the angle of highest irradiance. Based on results that are extracted from the data, the tracker system significantly boosts the output efficiency of the solar panel. By using the Micro-controller Uno board, LDRs, servo motor and special designed mechanical base, the tracking system is constructed, based on acquired data the influence of the STS on the increasing the solar panel efficiency is more obvious. Significantly, the tracker system rises the efficiency of the PV .

scholarly journals Increasing the efficiency of solar panel by solar tracking system

2020 ◽  
Vol 993 ◽  
pp. 012124
Author(s):  
A Imthiyas ◽  
S. Prakash ◽  
N Vijay ◽  
A Alwin Abraham ◽  
B Ganesh Kumar
Keyword(s):  
Tracking System ◽  
Solar Panel ◽  
Solar Tracking

scholarly journals Dual Axis Solar Tracker with Weather Sensor

2019 ◽  
Vol 8 (2S11) ◽  
pp. 3308-3311
Keyword(s):  
Energy Conversion ◽  
Tracking System ◽  
Weather Conditions ◽  
Maximum Amount ◽  
Control Element ◽  
Sensing Element ◽  
Advanced Level ◽  
Solar Tracking ◽  
Solar Tracker ◽  
Arduino Uno

This paper presents the outline and execution of simple, easy and cheaper automatic dual axis solar tracking system using Arduino UNO as the control element and light detecting sensors (LDRS) as the sensing element. This project involves advanced level of technology to capture maximum amount of energy using sun’s radiations. The main purpose is to increase the efficiency of tracking system which can rotate in all four directions continuously according to intensity of radiations and for energy conversion. In this, the voltage from panel is calculated from time to time in an interval of 1hr and this voltage is used to sense the weather conditions and display the climatic temperatures

scholarly journals Intelligence Solar Power System with Mobile Power Analysis

2021 ◽  
pp. 95-101
Author(s):  
Balaji K ◽  
Dharshan T R ◽  
Mahendran P ◽  
Priyadharsini R
Keyword(s):  
Solar Cells ◽  
Power Output ◽  
Power Analysis ◽  
Tracking System ◽  
Maximum Amount ◽  
Solar Panel ◽  
The Sun ◽  
Energy Demands ◽  
Solar Tracking ◽  
Reducing Costs

The renewable energies, solar energy is the only energy gained its popularity and importance quickly. Through the solar tracking system, we can produce an abundant amount of energy which makes the solar panel’s workability much more efficient. Perpendicular proportionality of the solar panel with the sun rays is the reason lying behind its efficiency. Pecuniary, its installation charge is high provided cheaper options are also available. The main control circuit is based upon NodeMcu microcontroller. Programming of this device is done in the manner that the LDR sensor, in accordance with the detection of the sun rays, will provide direction to the DC Motor that in which way the solar panel is going to revolve. Through this, the solar panel is positioned in such a manner that the maximum amount of sun rays could be received. Though a hike in the efficiency of the solar panel had a handsome increase still perfection was a far-fetched goal for it. Below 40%, most of the panels still hover to operate. Consequently, peoples are compelled to purchase a number of panels in order to meet their energy demands or purchase single systems with large outputs. Availability of the solar cells types with higher efficiencies is on provided they are too costly to purchase. Ways to be accessed for increasing solar panel efficiencies are a plethora in number still one of the ways to be availed for accomplishing the said purpose while reducing costs, is tracking. Tracking helps in the wider projection of the panel to the Sun with increased power output. It could be dual or single axis tracker

Sign in / Sign up

Export Citation Format

Share Document