scholarly journals Spatially Resolved Operando Synchrotron-Based X-Ray Diffraction Measurements of Ni-Rich Cathodes for Li-Ion Batteries

2022 ◽  
Vol 3 ◽  
Author(s):  
Andrew Stephen Leach ◽  
Alice V. Llewellyn ◽  
Chao Xu ◽  
Chun Tan ◽  
Thomas M. M. Heenan ◽  
...  
Keyword(s):  
High Capacity ◽  
Lithium Ion ◽  
Lower Percentage ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spatially Resolved ◽  
Electrochemical Cycling ◽  
Li Ion

Understanding the performance of commercially relevant cathode materials for lithium-ion (Li-ion) batteries is vital to realize the potential of high-capacity materials for automotive applications. Of particular interest is the spatial variation of crystallographic behavior across (what can be) highly inhomogeneous electrodes. In this work, a high-resolution X-ray diffraction technique was used to obtain operando transmission measurements of Li-ion pouch cells to measure the spatial variances in the cell during electrochemical cycling. Through spatially resolved investigations of the crystallographic structures, the distribution of states of charge has been elucidated. A larger portion of the charging is accounted for by the central parts, with the edges and corners delithiating to a lesser extent for a given average electrode voltage. The cells were cycled to different upper cutoff voltages (4.2 and 4.3 V vs. graphite) and C-rates (0.5, 1, and 3C) to study the effect on the structure of the NMC811 cathode. By combining this rapid data collection method with a detailed Rietveld refinement of degraded NMC811, the spatial dependence of the degradation caused by long-term cycling (900 cycles) has also been shown. The variance shown in the pristine measurements is exaggerated in the aged cells with the edges and corners offering an even lower percentage of the charge. Measurements collected at the very edge of the cell have also highlighted the importance of electrode alignment, with a misalignment of less than 0.5 mm leading to significantly reduced electrochemical activity in that area.

scholarly journals SYNTHESIS AND CHARACTERIZATION OF LITHIUM TITANATE (LTO) NANOCOMPOSITES VIA SOLUTION GROWTH ROUTE FOR Li-ION BATTERIES

2017 ◽  
Vol 4 (3) ◽  
pp. 10-13
Author(s):  
Selvamurugan M ◽  
Dhilip Kumar R ◽  
Karthikeyan C ◽  
Karuppuchamy S
Keyword(s):  
Lithium Ion ◽  
Lithium Titanate ◽  
Solution Growth ◽  
Li Ion Batteries ◽  
Ion Diffusion ◽  
X Ray Diffraction ◽  
Lithium Storage ◽  
Promising Alternative ◽  
X Ray ◽  
Li Ion

The novel bimetal oxide composite of Li4Ti5O12 was successfully synthesized by solution growth technique. The structural and microstructural properties of synthesized powders were characterized by powder X-ray diffraction (XRD), fourrier transform infrared spectroscopy (FT-IR), Raman spectroscopy,scanning electron microscopy (SEM) and energy dispersive X-ray-spectroscopy (EDX). The electrochemical performance of the Li4Ti5O12 anode was investigated using galvanostatic charge-discharge techniques. The electrochemical property of the Lithium titanate anode was investigated. The good electrochemicalperformance is ascribed to the stable lithium storage host structure, decreased electrochemical resistance and enhanced lithium-ion diffusion coefficient. Therefore, Li4Ti5O12 may be a promising alternative anode material for Li-ion batteries.

Ball-Milled Graphite-Tin Composite Anode Materials for Lithium-Ion Battery

2012 ◽  
Vol 736 ◽  
pp. 127-132
Author(s):  
Kuldeep Rana ◽  
Anjan Sil ◽  
Subrata Ray
Keyword(s):  
Lithium Ion Battery ◽  
Anode Materials ◽  
High Capacity ◽  
Lithium Ion ◽  
Composite Anode ◽  
X Ray Diffraction ◽  
Promising Alternative ◽  
X Ray ◽  
Initial Discharge ◽  
Lithium Ion Cell

Lithium alloying compounds as an anode materials have been a focused for high capacity lithium ion battery due to their highenergy capacity and safety characteristics. Here we report on the preparation of graphite-tin composite by using ball-milling in liquid media. The composite material has been characterized by scanning electron microscope, energy depressive X-ray spectroscopy, X-ray diffraction and Raman spectra. The lithium-ion cell made from graphite-tin composite presented initial discharge capacity of 1065 mAh/g and charge capacity 538 mAh/g, which becomes 528 mAh/g in the second cycle. The composite of graphite-tin with higher capacity compared to pristine graphite is a promising alternative anode material for lithium-ion battery.

Using In Situ High-Energy X-ray Diffraction to Quantify Electrode Behavior of Li-Ion Batteries from Extreme Fast Charging

2021 ◽  
Author(s):  
Partha P. Paul ◽  
Chuntian Cao ◽  
Vivek Thampy ◽  
Hans-Georg Steinrück ◽  
Tanvir R. Tanim ◽  
...  
Keyword(s):  
High Energy ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fast Charging ◽  
Li Ion

Phase Transformation Behavior and Stability of LiNiO 2 Cathode Material for Li‐Ion Batteries Obtained from In Situ Gas Analysis and Operando X‐Ray Diffraction

ChemSusChem ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 2240-2250 ◽  
Author(s):  
Lea de Biasi ◽  
Alexander Schiele ◽  
Maria Roca‐Ayats ◽  
Grecia Garcia ◽  
Torsten Brezesinski ◽  
...  
Keyword(s):  
Phase Transformation ◽  
Cathode Material ◽  
Gas Analysis ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
Transformation Behavior ◽  
X Ray ◽  
Phase Transformation Behavior ◽  
Li Ion

High-Performance Li-Ion Batteries Using Nickel-Rich Lithium Nickel Cobalt Aluminium Oxide–Nanocarbon Core–Shell Cathode: In Operando X-ray Diffraction

2019 ◽  
Vol 11 (34) ◽  
pp. 30719-30727 ◽  
Author(s):  
Selvamani Vadivel ◽  
Nutthaphon Phattharasupakun ◽  
Juthaporn Wutthiprom ◽  
Salatan duangdangchote ◽  
Montree Sawangphruk
Keyword(s):  
High Performance ◽  
Aluminium Oxide ◽  
Core Shell ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nickel Cobalt ◽  
Li Ion ◽  
In Operando

Structural complexity of layered-spinel composite electrodes for Li-ion batteries

2010 ◽  
Vol 25 (8) ◽  
pp. 1601-1616 ◽  
Author(s):  
Jordi Cabana ◽  
Christopher S. Johnson ◽  
Xiao-Qing Yang ◽  
Kyung-Yoon Chung ◽  
Won-Sub Yoon ◽  
...  
Keyword(s):  
Structural Complexity ◽  
Composite Electrodes ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Li Ion ◽  
Excess Phase ◽  
X Ray Absorption

The complexity of layered-spinel yLi2MnO3·(1 – y)Li1+xMn2–xO4 (Li:Mn = 1.2:1; 0 ≤ x ≤ 0.33; y ≥ 0.45) composites synthesized at different temperatures has been investigated by a combination of x-ray diffraction (XRD), x-ray absorption spectroscopy (XAS), and nuclear magnetic resonance (NMR). While the layered component does not change substantially between samples, an evolution of the spinel component from a high to a low lithium excess phase has been traced with temperature by comparing with data for pure Li1+xMn2–xO4. The changes that occur to the structure of the spinel component and to the average oxidation state of the manganese ions within the composite structure as lithium is electrochemically removed in a battery have been monitored using these techniques, in some cases in situ. Our 6Li NMR results constitute the first direct observation of lithium removal from Li2MnO3 and the formation of LiMnO2 upon lithium reinsertion.

Electrochemical Behavior of LiCo(1-x)MnxO2 Crystalline Powders

2014 ◽  
Vol 895 ◽  
pp. 334-337
Author(s):  
Azira Azahidi ◽  
Norlida Kamarulzaman ◽  
Kelimah Elong ◽  
Nurhanna Badar ◽  
Nurul Atikah Mohd Mokhtar
Keyword(s):  
Partial Substitution ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
Capacity Retention ◽  
X Ray ◽  
Capacity Loss ◽  
Transition Metal Element ◽  
Metal Element ◽  
Li Ion ◽  
Mn Doped

LiCoO2 is a well-known cathode material used in commercial Li-ion batteries but it has its own limitations in terms of cost and toxicity. Improvement of the material by partial substitution of Co with other transition metals is one of the alternative and effective ways to overcome the limitations and improve the electrochemical performance of cathode materials. The transition metal element used for the substitution has to be cheaper and non-toxic thus Mn is chosen here. LiCo(1-x)MnxO2 (x= 0.1, 0.2, 0.3) we synthesized by a novel route using a self-propagating combustion (SPC) method. The samples are analyzed using X-Ray Diffraction (XRD) for phase purity and Field Emission Scanning Electron Microscopy (FESEM) for morphology and particle size studies. The materials obtained are phase pure. In terms of electrochemical activity, though it does not show better first cycle discharge capacity, the Mn doped materials have improved capacity retention. Results showed that LiCo0.9Mn0.1O2 and LiCo0.8Mn0.2O2 exhibited less than 8 % capacity loss in the 20th cycle compared to 12 % for LiCoO2.

Structure and Stability of Olivine Phase FePO4

2011 ◽  
Vol 1333 ◽  
Author(s):  
Gene M. Nolis ◽  
Natalya A. Chernova ◽  
Shailesh Upreti ◽  
M. Stanley Whittingham
Keyword(s):  
Gravimetric Analysis ◽  
Li Ion Batteries ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Absorption Data ◽  
X Ray ◽  
Residual Amount ◽  
Low Toxicity ◽  
Li Ion ◽  
Trigonal Phase

ABSTRACTLiFePO4 has shown considerable promise as a cathode material in Li-ion batteries due to its stability, low toxicity and high cyclability. However, the data on thermodynamic stability of olivine phase FePO4 (o-FePO4), the delithiated form of o-LiFePO4, remains scarce and contradictory. In this work, o-FePO4 was synthesized by chemical delithiation of o-LiFePO4 and characterized structurally and thermally. X-ray diffraction and absorption data indicate pure olivine phase, but with residual amount of Fe2+, most likely due to incomplete delithiation. Differential scanning calorimetry and thermal gravimetric analysis reveal that o-LixFePO4 decomposes exothermally above 550 °C with about 9% weight loss, the products being trigonal phase FePO4, Fe7(PO4)6, and LiPO3.

Sign in / Sign up

Export Citation Format

Share Document