scholarly journals Design and Optimization of an EEG-Based Brain Machine Interface (BMI) to an Upper-Limb Exoskeleton for Stroke Survivors

2016 ◽  
Vol 10 ◽  
Author(s):  
Nikunj A. Bhagat ◽  
Anusha Venkatakrishnan ◽  
Berdakh Abibullaev ◽  
Edward J. Artz ◽  
Nuray Yozbatiran ◽  
...  
Sensors ◽  
2016 ◽  
Vol 16 (12) ◽  
pp. 2050 ◽  
Author(s):  
Zhichuan Tang ◽  
Shouqian Sun ◽  
Sanyuan Zhang ◽  
Yumiao Chen ◽  
Chao Li ◽  
...  

2018 ◽  
Vol 6 (1) ◽  
pp. 2
Author(s):  
Hongbo Liang ◽  
Chi Zhu ◽  
Yu Iwata ◽  
Shota Maedono ◽  
Mika Mochita ◽  
...  

Brain-Machine Interface (BMI) has been considered as an effective way to help and support both the disabled rehabilitation and healthy individuals’ daily lives to use their brain activity information instead of their bodies. In order to reduce costs and control exoskeleton robots better, we aim to estimate the necessary torque information for a subject from his/her electroencephalography (EEG) signals when using an exoskeleton robot to perform the power assistance of the upper limb without using external torque sensors nor electromyography (EMG) sensors. In this paper, we focus on extracting the motion-relevant EEG signals’ features of the shoulder joint, which is the most complex joint in the human’s body, to construct a power assistance system using wearable upper limb exoskeleton robots with BMI technology. We extract the characteristic EEG signals when the shoulder joint is doing flexion and extension movement freely which are the main motions of the shoulder joint needed to be assisted. Independent component analysis (ICA) is used to extract the source information of neural components, and then the average method is used to extract the characteristic signals that are fundamental to achieve the control. The proposed approach has been experimentally verified. The results show that EEG signals begin to increase at 300–400 ms before the motion and then decrease at the beginning of the generation of EMG signals, and the peaks appear at about one second after the motion. At the same time, we also confirmed the relationship between the change of EMG signals and the EEG signals on the time dimension, and these results also provide a theoretical basis for the delay parameter in the linear model which will be used to estimate the necessary torque information in future. Our results suggest that the estimation of torque information based on EEG signals is feasible, and demonstrate the potential of using EEG signals via the control of brain-machine interface to support human activities continuously.


Author(s):  
Junkai Lu ◽  
Kevin Haninger ◽  
Wenjie Chen ◽  
Suraj Gowda ◽  
Masayoshi Tomizuka ◽  
...  

Integrating an exoskeleton as the external apparatus for a brain–machine interface (BMI) has the advantage of providing multiple contact points to determine body segment postures and allowing control to and feedback from each joint. When using macaques as subjects to study the neural control of movement, an upper limb exoskeleton design with unlikely singularity is required to guarantee safe and accurate tracking of joint angles over all possible range of motion (ROM). Additionally, the compactness of the design is of more importance considering macaques have significantly smaller body dimensions than humans. This paper proposes a six degree-of-freedom (DOF) passive upper limb exoskeleton with 4DOFs at the shoulder complex. System kinematic analysis is investigated in terms of its singularity and manipulability. A real-time data acquisition system is set up, and system kinematic calibration is conducted. The effectiveness of the proposed exoskeleton system is finally demonstrated by a pilot animal test in the scenario of a reach and grasp task.


Sign in / Sign up

Export Citation Format

Share Document