scholarly journals Semi-Supervised GNSS Scintillations Detection Based on DeepInfomax

2020 ◽  
Vol 10 (1) ◽  
pp. 381 ◽  
Author(s):  
Giulio Franzese ◽  
Nicola Linty ◽  
Fabio Dovis

This work focuses on a machine learning based detection of ionospheric scintillation events affecting Global Navigation Satellite System (GNSS) signals. We here extend the recent detection results based on Decision Trees, designing a semi-supervised detection system based on the DeepInfomax approach recently proposed. The paper shows that it is possible to achieve good classification accuracy while reducing the amount of time that human experts must spend manually labelling the datasets for the training of supervised algorithms. The proposed method is scalable and reduces the required percentage of annotated samples to achieve a given performance, making it a viable candidate for a realistic deployment of scintillation detection in software defined GNSS receivers.

Author(s):  
H. Haddadi Amlashi ◽  
F. Samadzadegan ◽  
F. Dadrass Javan ◽  
M. Savadkouhi

Abstract. GNSS stands for Global Navigation Satellite System and is the standard generic term for satellite navigation systems that provide autonomous geo-spatial positioning with global coverage. The advantage of having access to multiple satellites is accuracy, redundancy, and availability at all the times. Though satellite systems do not often fail, if one fails GNSS receivers can pick up signals from other systems. If the line of sight is obstructed, having access to multiple satellites is also a benefit. GPS (Global Positioning System, USA), GLONASS (Global Navigation Satellite System, Russia), BeiDou (Compass, China), and some regional systems are positioning systems that are usually used. In recent years with the development of the UAVs and GNSS receivers, it is possible to manage an accurate PPK (Post Processing Kinematic) networks with a GNSS receiver mounted on a UAV to achieve the position of images principal points WGS1984 and to reduce the need for GCPs. But the most important challenge in a PPK task is, which a combination of different GNSS constellations would result in the most accurate computed position in checkpoints. For this purpose, this study focused on a PPK equipped UAV to map an open pit (Golgohar mine near Sirjan city). For the purpose, different combination of GPS, GLONASS and BeiDou used for position computed. Results are plotted and compared and found out having access to multiple constellations while doing a PPK task would bring higher accuracies in building photogrammetric models although it may cause some random error due to the higher values of noise while the number of the satellites increases.


2020 ◽  
Author(s):  
Patrick Henkel ◽  
Markus Lamm ◽  
Franziska Koch

<p>The snow water equivalent (SWE) is a key parameter in hydrology. In the past years, the signals of Global Navigation Satellite System (GNSS) receivers were discovered to be very attractive for SWE monitoring. The set-up of GNSS-based SWE monitoring typically consists of two GNSS receivers, whereas one is placed on the ground to sense the signal attenuation and time delay being caused by the snow pack. A second receiver is placed above the snow and serves as reference receiver. The measurements of both receivers are differenced to eliminate the common effect of errors in the satellite orbits and clocks, satellite phase and code biases and atmospheric errors, while the information on the snow is kept.</p><p>In this talk, we discuss the replacement of the reference receiver by a virtual reference station (VRS). The VRS is a virtual GNSS reference station, whose corrections are obtained by interpolation of the corrections from multiple surrounding reference stations to achieve a higher accuracy at the user location. The concept of VRS was first developed by Trimble and is widely used in today's real-time kinematic (RTK) positioning receivers. The concept of VRS is also attractive for snow monitoring, since the GNSS reference receiver could be avoided resulting in a lower power consumption and less costs. Moreover, this could be a big advantage for applications in slopes, which are, e.g., potentially avalanche prone. Within the hardware setup of our GNSS SWE sensors, an internet communication link for the reception of the corrections from the VRS corrections at the SWE monitoring site is already available.</p><p>However, there are also two challenges: First, the SWE monitoring stations in Alpine areas are typically at a significantly different altitude than the geodetic reference receivers. The differential tropospheric zenith delay is not negligible for altitudinal differences of more than 100 m. Therefore, the differential tropospheric delay needs to be considered either in the determination of VRS corrections or alternatively in the SWE determination. For altitudinal differences of less than 1000 m, the differential tropospheric zenith delay could be approximated by a model with sufficient accuracy. The residual modelling error is projected to the SWE estimate. Second, the use of a VRS instead of a conventional GNSS reference station requires a stronger data link, since the GNSS raw data (pseudoranges, carrier phases and carrier-to-noise power ratio measurements from all tracked satellites) need to be transmitted besides the final SWE results. However, an LTE link is totally sufficient.</p><p>Besides the methodology, we will also focus on specific hardware implementations.</p>


Sensors ◽  
2021 ◽  
Vol 21 (23) ◽  
pp. 7787
Author(s):  
Ciro Gioia ◽  
Daniele Borio

A multi-layered interference mitigation approach can significantly improve the performance of Global Navigation Satellite System (GNSS) receivers in the presence of jamming. In this work, three levels of defence are considered including: pre-correlation interference mitigation techniques, post-correlation measurement screening and FDE at the Position, Velocity, and Time (PVT) level. The performance and interaction of these receiver defences are analysed with specific focus on Robust Interference Mitigation (RIM), measurement screening through Lock Indicator (LIs) and Receiver Autonomous Integrity Monitoring (RAIM). The case of timing receivers with a known user position and using Galileo signals from different frequencies has been studied with Time-Receiver Autonomous Integrity Monitoring (T-RAIM) based on the Backward-Forward method. From the experimental analysis it emerges that RIM improves the quality of the measurements reducing the number of exclusions performed by T-RAIM. Effective measurements screening is also fundamental to obtain unbiased timing solutions: in this respect T-RAIM can provide the required level of reliability.


2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Tao Shi ◽  
Xuebin Zhuang ◽  
Liwei Xie

AbstractThe autonomous navigation of the spacecrafts in High Elliptic Orbit (HEO), Geostationary Earth Orbit (GEO) and Geostationary Transfer Orbit (GTO) based on Global Navigation Satellite System (GNSS) are considered feasible in many studies. With the completion of BeiDou Navigation Satellite System with Global Coverage (BDS-3) in 2020, there are at least 130 satellites providing Position, Navigation, and Timing (PNT) services. In this paper, considering the latest CZ-5(Y3) launch scenario of Shijian-20 GEO spacecraft via Super-Synchronous Transfer Orbit (SSTO) in December 2019, the navigation performance based on the latest BeiDou Navigation Satellite System (BDS), Global Positioning System (GPS), Galileo Navigation Satellite System (Galileo) and GLObal NAvigation Satellite System (GLONASS) satellites in 2020 is evaluated, including the number of visible satellites, carrier to noise ratio, Doppler, and Position Dilution of Precision (PDOP). The simulation results show that the GEO/Inclined Geo-Synchronous Orbit (IGSO) navigation satellites of BDS-3 can effectively increase the number of visible satellites and improve the PDOP in the whole launch process of a typical GEO spacecraft, including SSTO and GEO, especially for the GEO spacecraft on the opposite side of Asia-Pacific region. The navigation performance of high orbit spacecrafts based on multi-GNSSs can be significantly improved by the employment of BDS-3. This provides a feasible solution for autonomous navigation of various high orbit spacecrafts, such as SSTO, MEO, GEO, and even Lunar Transfer Orbit (LTO) for the lunar exploration mission.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Fahad Alhomayani ◽  
Mohammad H. Mahoor

AbstractIn recent years, fingerprint-based positioning has gained researchers’ attention since it is a promising alternative to the Global Navigation Satellite System and cellular network-based localization in urban areas. Despite this, the lack of publicly available datasets that researchers can use to develop, evaluate, and compare fingerprint-based positioning solutions constitutes a high entry barrier for studies. As an effort to overcome this barrier and foster new research efforts, this paper presents OutFin, a novel dataset of outdoor location fingerprints that were collected using two different smartphones. OutFin is comprised of diverse data types such as WiFi, Bluetooth, and cellular signal strengths, in addition to measurements from various sensors including the magnetometer, accelerometer, gyroscope, barometer, and ambient light sensor. The collection area spanned four dispersed sites with a total of 122 reference points. Each site is different in terms of its visibility to the Global Navigation Satellite System and reference points’ number, arrangement, and spacing. Before OutFin was made available to the public, several experiments were conducted to validate its technical quality.


Sign in / Sign up

Export Citation Format

Share Document