scholarly journals Techno-Economic Analysis of a Heat Pump Cycle Including a Three-Media Refrigerant/Phase Change Material/Water Heat Exchanger in the Hot Superheated Section for Efficient Domestic Hot Water Generation

2020 ◽  
Vol 10 (21) ◽  
pp. 7873
Author(s):  
Johann Emhofer ◽  
Klemens Marx ◽  
Tilman Barz ◽  
Felix Hochwallner ◽  
Luisa F. Cabeza ◽  
...  
Keyword(s):  
Energy Storage ◽  
Heat Exchanger ◽  
Economic Analysis ◽  
Phase Change ◽  
Heat Pump ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Hot Water ◽  
Domestic Hot Water ◽  
Change Material

Integration of a three-media refrigerant/phase change material (PCM)/water heat exchanger (RPW-HEX) in the hot superheated section of a heat pump (HP) system is a promising approach to save energy for domestic hot water (DHW) generation in multi-family houses. The RPW-HEX works as a desuperheater and as a latent thermal energy storage in the system. The latent thermal energy storage is charged during heating and cooling operation and discharged for DHW production. For this purpose, the water side of the RPW-HEX is connected to decentralized DHW storage devices. DHW consumption, building standards and climate, energy prices, material costs, and production costs are the constraints for the selection of the optimal storage size and RPW-HEX design. This contribution presents the techno-economic analysis of the RPW-HEX integrated into an R32 air source HP. With the aid of experimentally validated dynamic computer models, the optimal sizing of the RPW-HEX storage is discussed to maximize energy savings and to minimize the investment costs. The results are discussed in the context of a return of investment analysis, practical implementation aspects and energetic potential of the novel technology.

scholarly journals Designs of PCM based heat exchangers constructions for thermal energy storage tanks – examples and case study for selected design

2018 ◽  
Vol 70 ◽  
pp. 01010
Author(s):  
Marta Kuta ◽  
Dominika Matuszewska ◽  
Tadeusz Michał Wójcik
Keyword(s):  
Energy Storage ◽  
Heat Exchanger ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
New Technologies ◽  
Tube Heat Exchanger ◽  
Change Material

Increasing energy consumption in residential and public buildings requires development of new technologies for thermal energy production and storage. One of possibilities for the second listed need is the use of phase change materials (PCMs). This work is focused on solutions in this area and consists of two parts. First one is focused on different designs of thermal energy storage (TES) tanks based on the phase change materials. The second part is the analysis of tests results for TES tank containing shelf and tube heat exchanger and filled with phase change material. Thermal energy storage tank is analyzed in order to use it in domestic heating and hot utility water installations. The aim of this research was to check the applicability of phase change material for mentioned purpose. Results show that using phase change materials for thermal energy storage can increase amount of stored heat. The use of properly selected PCM and heat exchanger enables the process of thermal energy storing and releasing to become more efficient.

Experimental Testing of a Thermoelectric-Based Hydronic Cooling and Heating Device With Transient Charging of Sensible Thermal Energy Storage Water Tank

2008 ◽  
Author(s):  
Michael J. Kazmierczak ◽  
Sreenidhi Krishnamoorthy ◽  
Abhishek Gupta
Keyword(s):  
Energy Storage ◽  
Heat Exchanger ◽  
Heat Pump ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Storage Tank ◽  
Hot Water ◽  
System Component ◽  
Water Tank ◽  
Te Modules

Experiments were performed to charge either cold or hot water thermal energy storage tanks using a heat exchanger equipped with multiple thermoelectric (TE) modules. The primary objective was to design a simple, but effective, modular Peltier heat pump system component to provide chilled or hot water for domestic use at the appliance level, and when arranged in multiple unit combinations, a system that can potentially satisfy small home cooling and heating requirements. Moreover, when the TEs are directly energized using solar PV panels, the system provides a renewable, pollution free and off-the-grid solution to supplement home energy needs. The present work focuses on the design and testing of a thermoelectric heat exchanger component that consists of two water channels machined from two aluminum plates with an array of three or five thermoelectric modules placed in between to transiently cool and/or heat the water in the thermal energy storage tank. The water passing over either the cold or hot side of the TE modules is recirculated to charge the cold or hot thermal storage tank, respectively. The temperatures in the prototype Peltier heat exchanger test component and thermal energy water storage tank were measured during both cold tank charging and hot tank charging operation. The thermal efficiencies of TE heat pump cooling/heating system are reported. The effects of TE power input, number of TE units and rate of fluid flow are studied.

scholarly journals Evaluating a prototype compact thermal energy storage tank using paraffin-based phase change material for domestic hot water production

2019 ◽  
Vol 116 ◽  
pp. 00016
Author(s):  
George Dogkas ◽  
John Konstantaras ◽  
Maria K. Koukou ◽  
Vassilis N. Stathopoulos ◽  
Luis Coelho ◽  
...  
Keyword(s):  
Energy Storage ◽  
Phase Change ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
Storage System ◽  
Energy Storage System ◽  
Hot Water ◽  
Domestic Hot Water ◽  
Tube Heat Exchanger

A full-scale thermal energy storage system using phase change materials (PCM) is experimentally investigated for solar and geothermal applications. The system consists of a rectangular tank filled with PCM and a staggered fin tube heat exchanger (HE). The system is designed for the production of Domestic Hot Water (DHW) based on the EU Commission Regulation No 814/2013 [1] requirements. The characteristics that are studied are the stored energy density of the system, the heat transfer rate through the HE during the charging and discharging processes, the adequacy of produced hot water amount and the storage efficiency of the tank. The results of the experiments confirmed the potential of the system to meet several prerequisites of a DHW installation and in addition to make the operation of the coupled solar collector or ground heat pump efficient.

scholarly journals Phase Change Material Melting Process in a Thermal Energy Storage System for Applications in Buildings

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3254 ◽  
Author(s):  
Túlio Nascimento Porto ◽  
João M. P. Q. Delgado ◽  
Ana Sofia Guimarães ◽  
Hortência Luma Fernandes Magalhães ◽  
Gicelia Moreira ◽  
...  
Keyword(s):  
Heat Flux ◽  
Energy Storage ◽  
Heat Exchanger ◽  
Phase Change ◽  
Phase Change Material ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Melting Process ◽  
Average Heat ◽  
Change Material

The development of thermal energy storage systems is a possible solution in the search for reductions in the difference between the global energy supply and demand. In this context, the ability of some materials, the so-called phase change materials (PCMs), to absorb and release large amounts of energy under specific periods and operating conditions has been verified. The applications of these materials are limited due to their low thermal conductivity, and thus, it is necessary to associate them with high-conductivity materials, such as metals, to make the control of energy absorption and release times possible. Bearing this in mind, this paper presents a numerical analysis of the melting process of a PCM into a triplex tube heat exchanger (TTHX) with finned copper tubes, which allowed for the heat transfer between a heating fluid (water) and the phase change material to power a liquid-desiccant air conditioning system. Through the analysis of the temperature fields, liquid fractions, and velocities, as well as the phase transition, it was possible to describe the material charging process; then, the results were compared with experimental data, which are available in the specialized literature, and presented mean errors of less than 10%. The total required time to completely melt the PCM was about 105.5 min with the water being injected into the TTHX at a flow rate of 8.3 L/min and a temperature of 90 °C. It was observed that the latent energy that accumulated during the melting process was 1330 kJ, while the accumulated sensitive energy was 835 kJ. The average heat flux at the internal surface of the inner tube was about 3 times higher than the average heat flux at the outer surface of the TTHX intermediate tube due to the velocity gradients that developed in the internal part of the heat exchanger, and was about 10 times more intense than those observed in the external region of the equipment.

Sign in / Sign up

Export Citation Format

Share Document