scholarly journals Prediction of Shale Gas Reservoirs Using Fluid Mobility Attribute Driven by Post-Stack Seismic Data: A Case Study from Southern China

2020 ◽  
Vol 11 (1) ◽  
pp. 219
Author(s):  
Jing Zeng ◽  
Alexey Stovas ◽  
Handong Huang ◽  
Lixia Ren ◽  
Tianlei Tang

Paleozoic marine shale gas resources in Southern China present broad prospects for exploration and development. However, previous research has mostly focused on the shale in the Sichuan Basin. The research target of this study is expanded to the Lower Silurian Longmaxi shale outside the Sichuan Basin. A prediction scheme of shale gas reservoirs through the frequency-dependent seismic attribute technology is developed to reduce drilling risks of shale gas related to complex geological structure and low exploration level. Extracting frequency-dependent seismic attribute is inseparable from spectral decomposition technology, whereby the matching pursuit algorithm is commonly used. However, frequency interference in MP results in an erroneous time-frequency (TF) spectrum and affects the accuracy of seismic attribute. Firstly, a novel spectral decomposition technology is proposed to minimize the effect of frequency interference by integrating the MP and the ensemble empirical mode decomposition (EEMD). Synthetic and real data tests indicate that the proposed spectral decomposition technology provides a TF spectrum with higher accuracy and resolution than traditional MP. Then, a seismic fluid mobility attribute, extracted from the post-stack seismic data through the proposed spectral decomposition technology, is applied to characterize the shale reservoirs. The application result indicates that the seismic fluid mobility attribute can describe the spatial distribution of shale gas reservoirs well without well control. Based on the seismic fluid mobility attribute section, we have learned that the shale gas enrich areas are located near the bottom of the Longmaxi Formation. The inverted velocity data are also introduced to further verify the reliability of seismic fluid mobility. Finally, the thickness map of gas-bearing shale reservoirs in the Longmaxi Formation is obtained by combining the seismic fluid mobility attribute with the inverted velocity data, and two favorable exploration areas are suggested by analyzing the thickness, structure, and burial depth. The present work can not only be used to evaluate shale gas resources in the early stage of exploration, but also help to design the landing point and trajectory of directional drilling in the development stage.

2017 ◽  
Vol 2 (4) ◽  
pp. 324-335 ◽  
Author(s):  
Jin Wu ◽  
Feng Liang ◽  
Wen Lin ◽  
Hongyan Wang ◽  
Wenhua Bai ◽  
...  

Geophysics ◽  
2017 ◽  
Vol 82 (3) ◽  
pp. D187-D197 ◽  
Author(s):  
Jingling Xu ◽  
Lei Xu ◽  
Yuxing Qin

Water saturation is one of the most important parameters in petroleum exploration and development. However, its calculation has been limited by the insufficient logging data required by a new technique that further influences the calculation of the free gas content. The accuracy of water saturation estimates is also a critical issue because it controls whether or not we can obtain an accurate gas saturation estimate. Organic matter plays an important role in shale-gas reservoirs, and the total organic carbon (TOC) indirectly controls the gas content and gas saturation. Hence, water saturation is influenced by inorganic and organic components. After analyzing the relationship among TOC, core water saturation, and conventional gas saturation, considering the influence of TOC on gas saturation in organic-rich shale reservoirs, we developed two new methods to improve the accuracy of water saturation estimates: the revised water saturation-TOC method and the water saturation separation method, in which Archie water saturation, modified total shale water saturation, and TOC are integrated. According to case studies of Longmaxi-Wufeng shale, southeastern Sichuan Basin, China, the water saturation results from these two methods in shale reservoirs with different lithologies are consistent with those from core analysis. We concluded that these two methods can be evaluated quickly and they effectively evaluate the water saturation of shale reservoirs.


Fractals ◽  
2017 ◽  
Vol 25 (04) ◽  
pp. 1740007 ◽  
Author(s):  
GUANGLONG SHENG ◽  
YULIANG SU ◽  
WENDONG WANG ◽  
FARZAM JAVADPOUR ◽  
MEIRONG TANG

According to hydraulic-fracturing practices conducted in shale reservoirs, effective stimulated reservoir volume (ESRV) significantly affects the production of hydraulic fractured well. Therefore, estimating ESRV is an important prerequisite for confirming the success of hydraulic fracturing and predicting the production of hydraulic fracturing wells in shale reservoirs. However, ESRV calculation remains a longstanding challenge in hydraulic-fracturing operation. In considering fractal characteristics of the fracture network in stimulated reservoir volume (SRV), this paper introduces a fractal random-fracture-network algorithm for converting the microseismic data into fractal geometry. Five key parameters, including bifurcation direction, generating length ([Formula: see text]), deviation angle ([Formula: see text]), iteration times ([Formula: see text]) and generating rules, are proposed to quantitatively characterize fracture geometry. Furthermore, we introduce an orthogonal-fractures coupled dual-porosity-media representation elementary volume (REV) flow model to predict the volumetric flux of gas in shale reservoirs. On the basis of the migration of adsorbed gas in porous kerogen of REV with different fracture spaces, an ESRV criterion for shale reservoirs with SRV is proposed. Eventually, combining the ESRV criterion and fractal characteristic of a fracture network, we propose a new approach for evaluating ESRV in shale reservoirs. The approach has been used in the Eagle Ford shale gas reservoir, and results show that the fracture space has a measurable influence on migration of adsorbed gas. The fracture network can contribute to enhancement of the absorbed gas recovery ratio when the fracture space is less than 0.2 m. ESRV is evaluated in this paper, and results indicate that the ESRV accounts for 27.87% of the total SRV in shale gas reservoirs. This work is important and timely for evaluating fracturing effect and predicting production of hydraulic fracturing wells in shale reservoirs.


2020 ◽  
pp. 1-55
Author(s):  
Yang Gu ◽  
Sheng Xu ◽  
Chao Fang ◽  
Wei Zhang ◽  
Bairen Zhang ◽  
...  

The brittleness of shale determines the fracturability of shale reservoir and has a great influence on the exploration and development of shale gas. Therefore, prediction of brittleness and evaluation of fracturability of shale are very important in finding favorable areas for shale gas. We used the mineral composition, rock mechanics experiment, logging evaluation, two-dimensional seismic data inversion and fracture development degree to evaluation and analysis the vertical and plane brittleness characteristics and main controlling factors of the Longmaxi shale. In addition, we established the fracturability index (FI) of shale based on the brittleness index, critical strain energy release rate and fracture toughness. The results indicate that the brittle mineral content of Longmaxi shale in Fenggang block is between 69% and 90%, shale samples are prone to brittle deformation by microscopic observation. Brittle deformation has a positive effect on the porosity and percolation ability of shale; the fractures in the upper and lower parts of Longmaxi shale are relatively developed, and the degree of core fracture development is consistent with rock brittleness. The brittleness distribution of two-dimensional seismic data inversion is in good agreement with the brittleness predicted by well logging; shale reservoirs with low fracture toughness, low critical strain energy release rate and high brittleness index have high fracturability. Therefore, the research on shale brittleness and fracturability of Lower Silurian Longmaxi shale is expected to have important guiding significance for shale gas exploration and development in Southern China.


2021 ◽  
Vol 21 (1) ◽  
pp. 343-353
Author(s):  
Wei-Dong Xie ◽  
Meng Wang ◽  
Xiao-Qi Wang ◽  
Yan-Di Wang ◽  
Chang-Qing Hu

Pore structure and fractal dimensions can characterize the adsorption, desorption and seepage characteristics of shale gas reservoirs. In this study, pore structure, fractal characteristics and influencing factors were studied of the Longmaxi formation shale gas reservoir in southeastern Chongqing, China. Scanning electron microscopy was used to describe the characteristics of various reservoirs. High pressure mercury intrusion and low temperature liquid N2 and CO2 adsorption experiments were used to obtain pore structure parameters. V–S model, FHH model and Menger sponge model were selected to calculate the micropore, mesopore and macropore fractal dimensions, respectively. The results show that organic matter pores, inter-granular pores, intra-granular pores and micro-fractures are developed within the shale, and the pore morphology is mostly ink pores and parallel plate pores with aperture essentially in the 1–2 nm and 2–50 nm ranges. Moreover, macropores are the most complex in these samples, with mesopores being less complex than macropores, and the micropores being the simplest. D1 (micropore fractal dimension) ranges from 2.31 to 2.50, D2 (mesopore fractal dimension) ranges from 2.74 to 2.83, D3 (macropore fractal dimension) ranges from 2.87 to 2.95, and Dt (comprehensive fractal dimension) ranges from 2.69 to 2.83 of fractal characteristics. D1 and D2 are mainly controlled by TOC content, while D3 and Dt are mainly controlled by brittle and clay mineral content. These results may be helpful for exploration and the development of shale gas in southeastern Chongqing, China.


2018 ◽  
Vol 140 (11) ◽  
Author(s):  
Bin Yuan ◽  
Yongqing Wang ◽  
Zeng Shunpeng

In this study, we analyzed the flow-back resistance of slick water fracturing fluid in shale reservoirs. The flow-back resistance mainly includes capillary force, Van der Waals (VDW) force, hydrogen bond force, and hydration stress. Shale of Lower Silurian Longmaxi Formation (LSLF) was used to study its wettability, hydration stress, and permeability change with time of slick water treatment. The results reveal that wettability of LSLF shale was more oil-wet before immersion, while it becomes more water-wet after immersion. The hydration stress of the shale increased with increasing immersion time. The permeability decreased first, then recovered with increasing immersion time. The major reason for permeability recovery is that the capillary effect (wettability) and the shale hydration make macrocracks extension and expansion and hydration-induced fractures formation.


2011 ◽  
Vol 402 ◽  
pp. 804-807 ◽  
Author(s):  
Song Ru Mu ◽  
Shi Cheng Zhang

Shale gas reservoirs require a large fracture network to maximize well performance. Microseismic fracture mapping has shown that large fracture networks can be generated in many shale reservoirs. The application of microseismic fracture mapping measurements requires estimation of the structure of the complex hydraulic fracture or the volume of the reservoir that has been stimulated by the fracture treatment. There are three primary approaches used to incorporate microseismic measurements into reservoir simulation models: discrete modeling of the complex fracture network, wire-mesh model, and dual porosity model. This paper discuss the different simulation model, the results provided insights into effective stimulation designs and flow mechanism for shale gas reservoirs.


Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Chao Qian ◽  
Xizhe Li ◽  
Weijun Shen ◽  
Wei Guo ◽  
Yong Hu ◽  
...  

Deep shale gas reservoirs are a significant alternative type of shale gas reservoir in China. The productivity of deep shale gas wells is lower than that of shallow shale, and the imbibition characteristics of deep shale have a significant effect on the retention and backflow of fracturing fluid and the productivity of shale gas wells. In this study, the pore structure characteristics of organic-rich deep shale in the Lower Silurian Longmaxi Formation of Weiyuan-Luzhou play were analyzed by low-temperature nitrogen adsorption experiments, and then the imbibition characteristics and factors influencing deep shale were extensively investigated by spontaneous imbibition and nuclear magnetic resonance experiments. The results show that mainly micropores and mesopores are growing in the deep organic-rich shale of the Longmaxi Formation. The spontaneous imbibition curve of deep shale can be divided into an initial spontaneous imbibition stage, an intermediate transition stage, and a later diffusion stage, and the imbibition capacity coefficient of deep shale is lower than that of shallow shale. The transverse relaxation time (T2) spectrum distributions suggest that clay hydration and swelling produce new pores and microcracks, but then some pores and microfractures close. Deep shale reservoirs have an optimal hydration time when their physical properties are optimal. The increasing pore volume and the decreasing TOC content can enhance the imbibition capacity of shale. An inorganic salt solution, especially a KCl solution, has an inhibitory effect on the imbibition of shale. Higher salinity will result in a stronger inhibitory effect. It is crucial to determine the optimal amount of fracturing fluid and soaking time, and fracturing fluid with a high K+ content can be injected into the Longmaxi Formation deep shale to suppress hydration. These results provide theoretical guiding significance for comprehending the spontaneous imbibition and pore structure evolution characteristics of deep shale and enhancing methane production in deep shale gas reservoirs.


Sign in / Sign up

Export Citation Format

Share Document