Estimation of the Squirt-Flow Length Based on Crack Properties in Tight Sandstones

Tight sandstones have low porosity and permeability and strong heterogeneities with microcracks, resulting in small wave impedance contrasts with the surrounding rock and weak fluid-induced seismic effects, which make the seismic characterization for fluid detection and identification difficult. For this purpose, we propose a reformulated modified frame squirt-flow (MFS) model to describe wave attenuation and velocity dispersion. The squirt-flow length (R) is an important parameter of the model, and, at present, no direct method has been reported to determine it. We obtain the crack properties and R based on the DZ (David-Zimmerman) model and MFS model, and how these properties affect the wave propagation, considering ultrasonic experimental data of the Sichuan Basin. The new model can be useful in practical applications related to exploration areas.

Paleoenvironment of the Lower Ordovician Meitan Formation in the Sichuan Basin and Adjacent Areas, China

The quality of hydrocarbon source rocks is affected by the sedimentary paleoenvironment. A paleoenvironment with anoxia and a high paleoproductivity is beneficial to source rocks. The paleoenvironment of the Lower Ordovician Meitan Formation of the Sichuan Basin and its adjacent areas is lacking, restricting the oil and gas exploration of the Ordovician in the Sichuan Basin and its adjacent areas. In this paper, the content of major and trace elements of 50 samples was tested to clarify the paleoenvironment of the Meitan Formation. The paleoclimate, paleosalinity, paleoredox, and paleoproductivity during the deposition of the Meitan Formation were analyzed. The control effect of the paleoenvironment on the development of source rocks was clarified, and the favorable paleoenvironment for source rock development was pointed out. The results show that the paleoenvironment of the Meitan Formation has the following characteristics: humidity, brackish water, oxygen depletion, anoxia environment, and high paleoproductivity. These characteristics are conducive to the development of poor and moderate source rocks. The source rocks of the Meitan Formation were developed in the north, west, and south of the Sichuan Basin and its adjacent areas. The organic matter of the source rocks is mainly typed II1 kerogen, and the quality is evaluated as poor-medium source rocks having the potential of generating oil and gas. This study can provide fundamental parameters for the further exploration of Ordovician petroleum.

Spatiotemporal Variations of Focal Mechanism Solutions and Stress Field of the 2019 Changning Ms 6.0 Earthquake Sequence

The June 17, 2019, MS 6.0 Changning earthquake is the largest recorded event in the Sichuan basin, spatiotemporal variations of stress field may shed light on the seismogenic mechanism of the earthquake. We determined the focal mechanism solutions (FMSs) of 124 earthquakes with MS ≥ 3.0 occurring in the Changning area from April 1, 2007, to February 29, 2020, and analyzed changes of FMSs and stress field before and after Changning earthquake. The Changning aftershocks were predominantly thrust fault earthquakes, followed by strike slip. The P-axis azimuths of the aftershock FMSs were oriented predominantly in the NEE direction, notably differing from the NWW-oriented P-axis azimuths of pre-earthquake FMSs; it shows the rotation of local stress field before and after the Changning earthquake, it is speculated that the change of stress field in Changning area may be caused by long-term water injection and salt mining activities. From the southeast to the northwest of the aftershock zone, the azimuths of principal compressive stress (S1) change from NEE to near-EW in both horizontal and vertical planes. Significant changes occurred in the FMS types and stress field of the aftershock zone following the Changning earthquake, the FMSs became diverse, the S1 azimuth of the Changning area changed from NWW to NEE, and then EW, the plunge and stress tensor variances increased, it reflects that the stress field of the Changning area adjusts continually with time.

Mineral Composition of Prospective Section of Wufeng-Longmaxi Shale in Luzhou Shale Play, Sichuan Basin

Currently, Luzhou in the Sichuan Basin is a focal point for shale-gas exploration and development in China. However, a lack of detailed research on the mineral composition of the Wufeng Formation-Longmaxi Formation (WF-LF) shale is hindering the extraction of deep-buried shale gas in the Luzhou shale play. Herein, a field emission scanning electron microscope (FESEM) equipped with the Advanced Mineral Identification and Characterization System (AMICS) software was employed to analyze the mineral composition of the WF-LF shale from six wells in Luzhou. Quartz was the dominant mineral type, (16.9–87.21%, average 51.33%), followed by illite, calcite, dolomite, and pyrite. Our study revealed that (1) quartz content showed a moderate positive correlation with the total organic carbon (TOC) content, indicating that the quartz found in the shale is mostly of biological origin; and (2) the sum content of siliceous minerals and carbonaceous minerals was moderately positively correlated with the brittleness index (BRIT) in well SS1H2-7 and in the well group of RS8 and RS5, indicating that the siliceous minerals and carbonaceous minerals had an active effect on reservoir compressibility. Finally, according to the mineralogical features of each sublayer, we identified four types of reservoirs to determine their scope for exploration.

Numerical Simulation Research on Influencing Factors of Post-Fracturing Flowback of Shale Gas Wells in the Sichuan Basin

The horizontal well multistage hydraulic fracturing technology is the most effective way to exploit shale gas resources. Compared with conventional reservoir fracturing, the flowback rate of a fracturing fluid in a shale reservoir is extremely low, and a large amount of fracturing fluid remains in the formation. Therefore, the research on the mechanism of shale reservoir fracturing fluid flowback process will contribute to laying a theoretical foundation for improving the effect of the innovation for increasing output of shale gas wells. Based on the shale in the Sichuan Basin, this study first describes basic experiments on physical properties such as the porosity, permeability, mineral composition, wettability, and microstructure. The physical properties of shale reservoirs were also analyzed, which laid the foundation for subsequent modeling. Second, CMG software is used to establish a numerical model that fits the characteristics of the flowback process. The effect of reservoir properties, fracturing parameters, drainage–production system, chemical permeability on gas and water production in the flowback process and their mechanisms are also analyzed. According to most numerical simulation results, the lower cumulative gas production will be with the higher cumulative water production which means the higher flowback rate. The pursuit of only a high flowback rate is not advisable, and the development of the drainage–production system requires reasonable control of the fracturing fluid flowback rate. This study provides a theoretical basis for the optimization of shale gas drainage–production system after hydraulic fracturing.

The drivers and health risks of unexpected surface ozone enhancements over the Sichuan Basin, China, in 2020

Following a continuous increase in the surface ozone (O3) level from 2013 to 2019, the overall summertime O3 concentrations across China showed a significant reduction in 2020. In contrast to this overall reduction in surface O3 across China, unexpected surface O3 enhancements of 10.2 ± 0.8 ppbv (23.4 %) were observed in May–June 2020 (relative to 2019) over the Sichuan Basin (SCB), China. In this study, we use high-resolution nested-grid GEOS-Chem simulation, the eXtreme Gradient Boosting (XGBoost) machine learning method, and the exposure–response relationship to determine the drivers and evaluate the health risks due to the unexpected surface O3 enhancements. We first use the XGBoost machine learning method to correct the GEOS-Chem model–measurement O3 discrepancy over the SCB. The relative contributions of meteorology and anthropogenic emission changes to the unexpected surface O3 enhancements are then quantified with a combination of GEOS-Chem and XGBoost models. In order to assess the health risks caused by the unexpected O3 enhancements over the SCB, total premature mortalities are estimated. The results show that changes in anthropogenic emissions caused a 0.9 ± 0.1 ppbv O3 reduction, whereas changes in meteorology caused an 11.1 ± 0.7 ppbv O3 increase in May–June 2020 relative to 2019. The meteorology-induced surface O3 increase is mainly attributed to an increase in temperature and decreases in precipitation, specific humidity, and cloud fractions over the SCB and surrounding regions in May–June 2020 relative to 2019. These changes in meteorology combined with the complex basin effect enhance biogenic emissions of volatile organic compounds (VOCs) and nitrogen oxides (NOx), speed up O3 chemical production, and inhibit the ventilation of O3 and its precursors; therefore, they account for the surface O3 enhancements over the SCB. The total premature mortality due to the unexpected surface O3 enhancements over the SCB has increased by 89.8 % in May–June 2020 relative to 2019.