scholarly journals Online Foot Location Planning for Gait Transitioning Using Model Predictive Control

2021 ◽  
Vol 11 (17) ◽  
pp. 7866
Author(s):  
Xiangming Liu ◽  
Hongxu Ma ◽  
Lin Lang ◽  
Honglei An

This paper proposes an online uniform foot location planning method (UPMPC) based on model predictive control (MPC) for solving the problem of large posture changes during gait transitioning. This method converts the foot location planning into a discrete-time MPC problem. The core part of the method is to complete the planning of the foot location based on the linear inverted pendulum (LIP) model and the simplified robot dynamics model. By unifying the input foot location at each time step, the solution time is shortened. The final simulation experiment compares the results of using the UPMPC and foot location planning method with heuristic function (HF) for gait transitioning, respectively. This result demonstrates that the UPMPC can complete the gait transitioning task and adapt to large changes in posture during gait transitioning. In addition, the results also show the good performance of UPMPC in fixed gait.

Author(s):  
Norhaliza Wahab ◽  
Mohamed Reza Katebi ◽  
Mohd Fua’ad Rahmat ◽  
Salinda Bunyamin

Kertas kerja ini membincangkan tentang reka bentuk Pengawal Ramalan Model Suai menggunakan kaedah Pengenalpastian Model Keadaan Ruang Sub–ruang bagi proses enapcemar teraktif. Penggunaan teknik Pengenalpastian Model Keadaan Ruang Sub–ruang di dalam kaedah kawalan tingkat gelangsar suai dibincangkan di mana pengenalpastian sub–ruang dalam talian menggunakan algoritma N4SID di perkenalkan bersama dengan rekabentuk Pengawal ramalan model. Pembangunan N4SID dalam talian di dalam kertas kerja ini menggunakan pengemaskini QR di mana gabungan di antara teknik kemaskini dan kemasbawah membolehkan pengadaptasi tingkap gelangsar. Di sini, untuk setiap langkah masa, bagi setiap data baru akan dimasukkan ke faktor R manakala data yang lama dibuang. Begitu juga, strategi bagi uraian nilai tunggal diperkenalkan ke dalam Pengawal Ramalan Model Suai tak langsung untuk masukan tambahan kawalan bagi sistem terkekang tak lelurus. Beberapa kajian simulasi bagi parameter kawalan berlainan di dalam pengawal/pengenalpastian algoritma dilaksanakan. Bagi reka bentuk Pengawal Ramalan Model Suai tak langsung, pengiraan masa yang terlibat dengan menggunakan pendekatan uraian nilai tunggal kurang berbanding dengan kaedah perancangan kuadratik dan keputusan yang memberangsangkan ini adalah sumbangan utama di dalam kertas kerja ini. Kata kunci: Pengawal suai; proses enapcemar teraktif; pengawal ramalan model; pengenalpastian sub–ruang This paper explores the design of Adaptive Model Predictive Control (AMPC) using Subspace State–space Model Identification (SMI) techniques for an activated sludge process. The implementation of SMI techniques in the adaptive sliding window control methods are discussed where the online subspace identification using Numerical State–space Subspace System Identification (N4SID) algorithm is proposed along with Model Predictive Control (MPC) design method. The online N4SID algorithm developed in this study makes use of the QR–updating where the combination of update and down date techniques enables sliding window adaptation. Here, at each time step, for the new experimental data added into R factor, the oldest data are removed. Also, the Singular Value Decomposition (SVD–based) strategy is proposed into Indirect AMPC (IAMPC) for the control increment input constrained nonlinear system. Several simulation studies for different control parameters in control/identification algorithm are performed. For the IAMPC control design, the computational times involved using an SVD approach shows less burdensome compared to Quadratic Programming (QP) method and such an interesting result is considered as one of the main contribution in this paper. Key words: Adaptive control; activated sludge process; model predictive control; subspace identification


2021 ◽  
Author(s):  
Jonas Berlin ◽  
Georg Hess ◽  
Anton Karlsson ◽  
William Ljungbergh ◽  
Ze Zhang ◽  
...  

This paper presents an approach to collision-free, long-range trajectory generation for a mobile robot in an industrial environment with static and dynamic obstacles. For the long range planning a visibility graph together with A* is used to find a collision-free path with respect to the static obstacles. This path is used as a reference path to the trajectory planning algorithm that in addition handles dynamic obstacles while complying with the robot dynamics and constraints. A Nonlinear Model Predictive Control (NMPC) solver generates a collision-free trajectory by staying close the initial path but at the same time obeying all constraints. The NMPC problem is solved efficiently by leveraging the new numerical optimization method Proximal Averaged Newton for Optimal Control (PANOC). The algorithm was evaluated by simulation in various environments and successfully generated feasible trajectories spanning hundreds of meters in a tractable time frame.


2020 ◽  
Vol 68 (8) ◽  
pp. 687-702
Author(s):  
Thomas Schmitt ◽  
Tobias Rodemann ◽  
Jürgen Adamy

AbstractEconomic model predictive control is applied to a simplified linear microgrid model. Monetary costs and thermal comfort are simultaneously optimized by using Pareto optimal solutions in every time step. The effects of different metrics and normalization schemes for selecting knee points from the Pareto front are investigated. For German industry pricing with nonlinear peak costs, a linear programming trick is applied to reformulate the optimization problem. Thus, together with an efficient weight determination scheme, the Pareto front for a horizon of 48 steps is determined in less than 4 s.


2019 ◽  
Vol 2019 ◽  
pp. 1-12
Author(s):  
Yu Li ◽  
Qiming Zou ◽  
Xiaoru Ji ◽  
Chanyuan Zhang ◽  
Ke Lu

Model Predictive Control (MPC) can effectively handle control problem with disturbances, multicontrol variables, and complex constraints and is widely used in various control systems. In MPC, the control input at each time step is obtained by solving an online optimization problem, which will cause a time delay in real time on embedded computers with limited computational resources. In this paper, we utilize adaptive Alternating Direction Method of Multipliers (a-ADMM) to accelerate the solution of MPC. This method adaptively adjusts penalty parameter to balance the value of primal residual and dual residual. The performance of this approach is profiled via the control of a quadcopter with 12 states and 4 controls and prediction horizon ranging from 10 to 40. The simulation results demonstrate that the MPC based on a-ADMM has a significant improvement in real-time and convergence performance and thus is more suitable for solving large-scale optimal control problems.


Author(s):  
Stephen M. Erlien ◽  
Adam F. Jungkunz ◽  
J. Christian Gerdes

Recent work in homogeneous charge compression ignition (HCCI) engine control has focused on the use of variable valve timing (VVT) as a near term implementation strategy. Valve timing has a significant influence on combustion phasing and can be implemented with cam-based VVT systems already available in production vehicles. However, these systems introduce cylinder coupling via a shared actuator. This paper presents a model predictive control (MPC) framework that explicitly accounts for this intercylinder coupling as a constraint on the system. The execution time step of this MPC controller is shorter than the prediction time step, enabling consideration of a common actuator across otherwise independent systems as the engine cycle progresses. This enables effective use of the cylinder independent actuators to augment the shared actuator in achieving the control objectives. Experiments on a multicylinder HCCI engine test bed validate this approach to handling coupled actuation and illustrate effective use of cylinder independent actuators in response to limited capabilities of the shared actuator.


2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Elizabeth Saade ◽  
David E. Clough ◽  
Alan W. Weimer

A model predictive control (MPC) system for a solar-thermal reactor was developed and applied to the solar-thermal steam-gasification of carbon. The controller aims at rejecting the disturbances in solar irradiance, caused by the presence of clouds. Changes in solar irradiance are anticipated using direct normal irradiance (DNI) forecasts generated using images acquired through a Total Sky Imager (TSI). The DNI predictor provides an estimation of the disturbances for the control algorithm, for a time horizon of 1 min. The proposed predictor utilizes information obtained through the analysis of sky images, in combination with current atmospheric measurements, to produce the DNI forecast. The predictions of the disturbances are used, in combination with a dynamic model of the process, to determine the required control moves at every time step. The performance of the proposed DNI predictor-controller scheme was compared to the performance of an equivalent MPC that does not use DNI forecasts in the calculation of the control signals. In addition, the performance of a controller fed with perfect DNI predictions was also evaluated.


2021 ◽  
Vol 11 (21) ◽  
pp. 9887
Author(s):  
Feng Gao ◽  
Qiuxia Hu ◽  
Jie Ma ◽  
Xiangyu Han

Motion planning by considering it as an optimal problem is an effective and widely applicable method. Its comprehensive performance greatly depends on the vehicle dynamics model, which is highly coupled and nonlinear, especially under the dynamical scenarios and causes much more consumption of computation resources for the numerical optimization. To increase the real time performance of the motion planner designed by nonlinear model predictive control (NMPC), a unified and simplified vehicle dynamics model (SDM) is presented to make a balance between the accuracy and complexity for dynamical driving scenarios. Based on the statistical analysis results of naturalistic driving conditions, a unified nonlinear vehicle dynamics model is set up, which considers the tyre cornering characteristic and is also applicable to conditions with large turning angle. After the validation of this coupled dynamics model (CDM) by comparisons with other widely used models under a variety of conditions, the coupling effect is analyzed according to the transfer functions, which are obtained by linearizing CDM at equilibrium points. Furthermore, SDM is derived by ignoring the weak part of the coupling effect. The accuracy of SDM is validated by several comparative studies with other models and it is further applied to design a motion planner by NMPC to validate its contribution on the performance improvement under dynamical driving conditions.


2020 ◽  
Vol 100 (3-4) ◽  
pp. 1213-1247
Author(s):  
Davide Bicego ◽  
Jacopo Mazzetto ◽  
Ruggero Carli ◽  
Marcello Farina ◽  
Antonio Franchi

AbstractIn this paper, we propose, discuss, and validate an online Nonlinear Model Predictive Control (NMPC) method for multi-rotor aerial systems with arbitrarily positioned and oriented rotors which simultaneously addresses the local reference trajectory planning and tracking problems. This work brings into question some common modeling and control design choices that are typically adopted to guarantee robustness and reliability but which may severely limit the attainable performance. Unlike most of state of the art works, the proposed method takes advantages of a unified nonlinear model which aims to describe the whole robot dynamics by explicitly including a realistic physical description of the actuator dynamics and limitations. As a matter of fact, our solution does not resort to common simplifications such as: (1) linear model approximation, (2) cascaded control paradigm used to decouple the translational and the rotational dynamics of the rigid body, (3) use of low-level reactive trackers for the stabilization of the internal loop, and (4) unconstrained optimization resolution or use of fictitious constraints. More in detail, we consider as control inputs the derivatives of the propeller forces and propose a novel method to suitably identify the actuator limitations by leveraging experimental data. Differently from previous approaches, the constraints of the optimization problem are defined only by the real physics of the actuators, avoiding conservative – and often not physical – input/state saturations which are present, e.g., in cascaded approaches. The control algorithm is implemented using a state-of-the-art Real Time Iteration (RTI) scheme with partial sensitivity update method. The performances of the control system are finally validated by means of real-time simulations and in real experiments, with a large spectrum of heterogeneous multi-rotor systems: an under-actuated quadrotor, a fully-actuated hexarotor, a multi-rotor with orientable propellers, and a multi-rotor with an unexpected rotor failure. To the best of our knowledge, this is the first time that a predictive controller framework with all the valuable aforementioned features is presented and extensively validated in real-time experiments and simulations.


2021 ◽  
Vol 11 (1) ◽  
pp. 426
Author(s):  
Puyong Xu ◽  
Ning Wang ◽  
Shi-Lu Dai ◽  
Lei Zuo

In this paper, a mobile robot motion planning method with modified BIT* (batch informed trees) and MPC (Model Predictive Control) is presented. The conventional BIT* was modified here by integrating a stretch method that improves the path points connections, to get a collision-free path more quickly. After getting a reference path, the MPC method is employed to determine the motion at each moment with a given objective function. In the objective function, a repulsive function based on the direction and distance of the obstacles is introduced to avoid the robot being too close to the obstacle, so the safety can be ensured. Simulation results show the good navigation performance of the whole framework in different scenarios.


Sign in / Sign up

Export Citation Format

Share Document