scholarly journals Optimization of Electricity Generation Technologies to Reduce Carbon Dioxide Emissions in Egypt

2021 ◽  
Vol 11 (18) ◽  
pp. 8788
Author(s):  
Ahmed Abdel-Hameed ◽  
Juyoul Kim ◽  
Joung-Hyuk Hyun ◽  
Hilali Hussein Ramadhan ◽  
Soja Reuben Joseph ◽  
...  

In February 2016, the Egyptian government introduced Egyptian Vision 2030. An important pillar of this vision is energy. Egyptian Vision 2030 presented renewable energy as the best solution to reduce the emission of greenhouse gases (GHGs) in the energy sector. Egypt’s electricity comes from various power plants; conventional thermal plants generate over 90% in which gas-fired generation accounts for 75% of the total output. Following the increase in natural gas (NG) projects in Egypt, NG is the dominant electricity source. Based on the pillars of the sustainable development strategy of Egypt, the county can increase dependence on renewable energies, and reduce CO2 emissions and bound electricity production from natural gas. We aim to determine future energy generation strategies from various power plant technologies depending on these three principles. To make the picture more clear and complete, we compared the environmental impacts and external costs of fossil, hydro, and nuclear power plants in Egypt. We used two computer codes: the model for energy supply strategy alternatives and their general environmental impacts (MESSAGE) and the simplified approach for estimating environmental impacts of electricity generation (SIMPACTS). The MESSAGE code modeled the energy-supply systems to determine the best energy-supply technology to meet future energy demands. SIMPACTS estimated the environmental impact and damage costs associated with electricity generation. The results indicated that nuclear power plants and gas power plants are long-term electricity supply sources. Nuclear power plants entail low total external-damage costs, in addition to low environmental impact during normal operation. We conclude that nuclear power plants are the best alternative long-term electricity-generation choice for Egypt to meet future electricity demands.

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6258
Author(s):  
Juyoul Kim ◽  
Ahmed Abdel-Hameed ◽  
Soja Reuben Joseph ◽  
Hilali Hussein Ramadhan ◽  
Mercy Nandutu ◽  
...  

The most recent assessments conducted by the International Energy Agency indicate that natural gas accounts for the majority of Nigeria’s fossil fuel-derived electricity generation, with crude oil serving mostly as a backup source. Fossil fuel-generated electricity represents 80% of the country’s total. In addition, carbon dioxide (CO2) emissions in Nigeria in 2018 (101.3014 Mtons) demonstrated a 3.83% increase from 2017. The purpose of this study is to suggest an alternate energy supply mix to meet future electrical demand and reduce CO2 emissions in Nigeria. The Model for Energy Supply Strategy Alternatives and their General Environmental Impact (MESSAGE) was used in this study to model two case situations of the energy supply systems in Nigeria to determine the best energy supply technology to meet future demand. The Simplified Approach to Estimating Electricity Generation’s External Costs and Impacts (SIMPACTS) code is also used to estimate the environmental impacts and resulting damage costs during normal operation of various electricity generation technologies. Results of the first scenario show that gas and oil power plants are the optimal choice for Nigeria to meet future energy needs with no bound on CO2 emission. If Nigeria adopts CO2 emission restrictions to comply with the Paris Agreement’s target of decreasing worldwide mean temperature rise to 1.5 °C, the best option is nuclear power plants (NPPs). The MESSAGE results demonstrate that both fossil fuels and NPPs are the optimal electricity-generating technologies to meet Nigeria’s future energy demand. The SIMPACTS code results demonstrate that NPPs have the lowest damage costs because of their low environmental impact during normal operation. Therefore, NPP technology is the most environmentally friendly technology and the best choice for the optimization of future electrical technology to meet the demand. The result from this study will serve as a reference source in modeling long-term energy mix therefore reducing CO2 emission in Nigeria.


Author(s):  
Oliver Martin ◽  
Antonio Ballesteros ◽  
Christiane Bruynooghe ◽  
Michel Bie`th

The energy supply of the future in the EU will be a mix of renewable, fossil and nuclear. There are 145 nuclear power reactors in operation in 15 out of the 27 EU countries, with installed power ∼132 GWe. The age distribution of current nuclear power plants in EU is such that in 2010 most of them will have passed 20-years and approximately 25% of them 30 years of age. The decrease of energy supply from nuclear generated electricity can not always be compensated in a reliable and economical way within a short time span. For this situation utilities may be keen to upgrade the reactor output and /or to ask their regulatory bodies for longer term operation. Under the research financed in the Euratom part of the Research Directorate (RTD) of the European Commission several projects explicitly address the safe long term operation of nuclear power plants (NULIFE, LONGLIFE) and the topics proposed in the 2010 call explicitly address issues concerning component ageing, in particular non metallic components, i.e. instrumentation and cables (I&C) and concrete ageing. This paper presents an overview of the plans for long term operation (LTO) of nuclear power plants in the EU. Special emphasis is given on research activities on component ageing management and long term operation issues related to safety.


2019 ◽  
Vol 5 (1) ◽  
Author(s):  
Mauro Cappelli ◽  
Francesco Cordella ◽  
Francesco Bertoncini ◽  
Marco Raugi

Guided wave (GW) testing is regularly used for finding defect locations through long-range screening using low-frequency waves (from 5 to 250 kHz). By using magnetostrictive sensors, some issues, which usually limit the application to nuclear power plants (NPPs), can be fixed. The authors have already shown the basic theoretical background and simulation results concerning a real steel pipe, used for steam discharge, with a complex structure. On the basis of such theoretical framework, a new campaign has been designed and developed on the same pipe, and the obtained experimental results are now here presented as a useful benchmark for the application of GWs as nondestructive techniques. Experimental measures using a symmetrical probe and a local probe in different configurations (pulse-echo and pitch-catch) indicate that GW testing with magnetostrictive sensors can be reliably applied to long-term monitoring of NPPs components.


Author(s):  
Ronaldo Szilard ◽  
Hongbin Zhang

The current fleet of 104 nuclear power plants in the U.S. began their operation with 40 years operating licenses. About half of these plants have their licenses renewed to 60 years and most of the remaining plants are anticipated to pursue license extension to 60 years. With the superior performance of the current fleet and formidable costs of building new nuclear power plants, there has been significant interest to extend the lifetime of the current fleet even further from 60 years to 80 years. This paper addresses some of the key long term technical challenges and identifies R&D needs related to the long term safe and economic operation of the current fleet.


2020 ◽  
Vol 149 ◽  
pp. 107793
Author(s):  
Minyu Fan ◽  
Mingya Chen ◽  
Min Yu ◽  
Wenqing Jia ◽  
Yuanfei Li ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document