scholarly journals Investigation on Hydroplaning Behaviors of a Patterned Tire on a Steel Bridge Deck Pavement

2021 ◽  
Vol 11 (22) ◽  
pp. 10566
Author(s):  
Yang Liu ◽  
Zhendong Qian ◽  
Changbo Liu ◽  
Qibo Huang
Keyword(s):  
Bridge Deck ◽  
Fluid Model ◽  
Interaction Model ◽  
Water Film ◽  
Ct Scanning ◽  
Driving Safety ◽  
Fe Model ◽  
Steel Bridge ◽  
Patterned Tire ◽  
Bridge Deck Pavement

The hydroplaning propensity on the steel bridge deck pavement (SBDP) is higher than ordinary road pavements. In this study, the objective is to develop a hydroplaning model to evaluate the hydroplaning behaviors for SBDPs. To achieve this goal, a finite element (FE) model of a 3D-patterned radial tire model was developed at first, and the grounding characteristics of tire on the SBDP were calculated as an initial condition for the follow-up hydroplaning analysis. The X-ray CT scanning device and Ostu thresholding method were used for image processing of pavement surface topography, and the 3D FE model of SBDP was established by the reverse stereological theory and voxel modeling technique, which can accurately reconstruct the pavement morphology. A fluid model was established to simulate the dynamic characteristics of water film between the tire and SBDP. On this basis, the tire–fluid–pavement interaction model was developed based on the CEL (Couple Eulerian–Lagrangian) algorithm, and it was verified by the hydroplaning empirical equations. Finally, the hydroplaning behaviors on the SBDP were studied. The findings from this study can provide a tool for hydroplaning evaluation on SBDPs, and will be helpful to improve the driving safety of SBDP in rainy days.

Developing cold-mixed epoxy resin-based ultra-thin antiskid surface layer for steel bridge deck pavement

2021 ◽  
Vol 291 ◽  
pp. 123366
Author(s):  
Yang Liu ◽  
Zhendong Qian ◽  
Xijun Shi ◽  
Yuheng Zhang ◽  
Haisheng Ren
Keyword(s):  
Surface Layer ◽  
Epoxy Resin ◽  
Bridge Deck ◽  
Steel Bridge ◽  
Bridge Deck Pavement

scholarly journals A Comprehensive Life-Cycle Cost Analysis Approach Developed for Steel Bridge Deck Pavement Schemes

Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 565
Author(s):  
Changbo Liu ◽  
Zhendong Qian ◽  
Yang Liao ◽  
Haisheng Ren
Keyword(s):  
Life Cycle ◽  
Life Cycle Cost ◽  
Bridge Deck ◽  
Analysis Approach ◽  
Steel Bridge ◽  
User Cost ◽  
Construction Quality ◽  
Concrete System ◽  
Traffic Conditions ◽  
Bridge Deck Pavement

This study aims to evaluate the economy of a steel bridge deck pavement scheme (SBDPS) using a comprehensive life-cycle cost (LCC) analysis approach. The SBDPS are divided into the “epoxy asphalt concrete system”(EA system) and“ Gussasphalt concrete system”(GA system) according to the difference in the material in the lower layer of the SBDPS. A targeted LCC checklist, including manager cost and user cost was proposed, and a Markov-based approach was applied to establish a life-cycle performance model with clear probability characteristics for SBDPS. Representative traffic conditions were designed using a uniform design method, and the LCC of SBDPS under representative traffic conditions and different credibility (construction quality as a random factor) was compared. The reliability of the LCC analysis approach was verified based on the uncertainty analysis method. Based on an expert-scoring approach, a user cost weight was obtained to ensure it is considered reasonably in the LCC analysis. Compared with the cumulative traffic volume, the cumulative equivalent single axle loads (CESAL) have a closer relationship with the LCC. The GA system has better LCC when the CESAL is less, while the EA system is just the opposite. The breaking point of CESAL for the LCC of the EA system and the GA system is 15 million times. The LCC analysis of SBDPS should consider the influence of random factors such as construction quality. The comprehensive LCC analysis approach in this paper can provide suggestions for bridge-management departments to make a reasonable selection on SBDPS.

scholarly journals Material and Structural Properties of Fiber-Reinforced Resin Composites as Thin Overlay for Steel Bridge Deck Pavement

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Hui Zhang ◽  
Chengqi Zhou ◽  
Kuan Li ◽  
Peiwei Gao ◽  
Youqiang Pan ◽  
...  
Keyword(s):  
Bridge Deck ◽  
Bending Strength ◽  
Failure Strain ◽  
Fiber Reinforcement ◽  
Bending Test ◽  
Steel Bridge ◽  
Fiber Reinforced ◽  
High Toughness ◽  
Epoxy Asphalt ◽  
Bridge Deck Pavement

Fatigue cracks are main damages to steel bridge deck pavement with thermosetting epoxy asphalt. By combining a high-toughness resin material with fiber woven fabrics, this study formed an ultrathin overlay of fiber-reinforced high-toughness resin to improve cracking resistance of pavement. Through theoretical measurement and bending test, this research studied change laws of bending and tensile properties of epoxy asphalt concrete after fiber reinforcement and analyzed bending strength and the maximum failure strain of beams at different temperatures. Moreover, the reinforcing effects of different fibers were discussed. It is found that bending strength, maximum failure strain, and stiffness modulus of the beams with epoxy asphalt are improved after fiber reinforcement. With the decrease of temperature, after fiber reinforcement, the mode of bending failure of the epoxy asphalt mixture (EAM) changes from brittle fracture into shear failure, accompanied with significant yield phenomenon. Furthermore, organic carbon fiber is sensitive to influences of temperature, while glass fiber is least sensitive to temperature.

Development and evaluation of a pothole patching material for steel bridge deck pavement

2021 ◽  
Vol 313 ◽  
pp. 125393
Author(s):  
Leilei Chen ◽  
Xiangfei Zhang ◽  
Wenqi Ma ◽  
Xiaorui Zhang
Keyword(s):  
Bridge Deck ◽  
Steel Bridge ◽  
Bridge Deck Pavement
Sign in / Sign up

Export Citation Format

Share Document