scholarly journals Experimental Investigation on the Behavior of Gravelly Sand Reinforced with Geogrid under Cyclic Loading

2021 ◽  
Vol 11 (24) ◽  
pp. 12152
Author(s):  
Jia-Quan Wang ◽  
Zhen-Chao Chang ◽  
Jian-Feng Xue ◽  
Zhi-Nan Lin ◽  
Yi Tang
Keyword(s):  
Cyclic Loading ◽  
High Speed ◽  
Water Pressure ◽  
Excess Pore Pressure ◽  
Triaxial Tests ◽  
Sand Sample ◽  
Loading Frequency ◽  
Gravelly Soil ◽  
Embedding Effect ◽  
Excess Pore

In view of the dynamic response of geogrid-reinforced gravel under high-speed train load, this paper explores the dynamic characteristics of geogrid-reinforced gravel under semi-sine wave cyclic loading. A number of large scale cyclic triaxial tests were performed on saturated gravelly soil reinforced with geogrid to study the influence of the number of reinforcement layers and loading frequencies on the dynamic responses of reinforced gravelly sand subgrade for high speed rail track. The variation of cumulative axial and volumetric strains, excess pore pressure and resilient modulus with number of loading cycles, loading frequency, and reinforcement arrangement are analyzed. The test results reveal that the cumulative axial strain decreases as the number of reinforcement layers increases, but increases with loading frequency. The resilience modulus increases with the number of reinforcement layers, but decreases as the loading frequency increases. The addition of geogrid can reduce the excess pore water pressure of the sample, but it can slightly enhance the rubber mold embedding effect of the sand sample. As the loading frequency increases, the rubber mold embedding effect gradually weakens.

scholarly journals Microscopic Mechanism Affecting Shear Strength in Lignin-Treated Loess Samples

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Wei Liu ◽  
Juan Wang ◽  
Gaochao Lin ◽  
Li Wen ◽  
Qian Wang
Keyword(s):  
Shear Strength ◽  
Lignin Content ◽  
Axial Stress ◽  
Water Pressure ◽  
Excess Pore Pressure ◽  
Triaxial Tests ◽  
Microscopic Mechanism ◽  
Valley Fill ◽  
Fill Material ◽  
Excess Pore

In China, engineers have worked to create additional usable land for building construction by flattening the ridges of hills and filling in the adjacent valleys. China’s Loess Plateau comprises a type of soil (loess) with a large pore structure that can collapse and become unstable when exposed to groundwater. Conventional valley fill materials include remolded loess or remolded loess treated with cement, lime, gypsum, or other stabilizing additives. These stabilizers are often detrimental to the surrounding environment. Moreover, loess treated with conventional stabilizers exhibits excessive brittleness, which is not suitable for building foundations. Adequate stability of the building foundations in the filled valleys is required to ensure public safety. In this study, we tested 50 remolded loess samples treated with a lignin polymer compound to determine its potential as a valley fill material. Triaxial tests, scanning electron microscopy (SEM), and X-ray diffraction (XRD) were used to study the mechanical characteristics of each sample, determine the effects of the lignin treatment on the loess, and identify the microscopic mechanism affecting shear stress in the lignin-treated loess. The corresponding development of excess pore pressure and volumetric responses under monotonic triaxial testing were also considered. Based on this study’s results, the optimum lignin content in the treated loess samples was 4%; lignin contents exceeding 4% decreased axial stress and increased dilation after saturation. The shear strength and strain-hardening phenomenon of the lignin-treated loess samples increased as the lignin content increased, while the excess pore water pressure decreased. Microscopically, the addition of lignin increased cohesion in the loess samples, while slightly contributing to the internal friction angle. The use of lignin as a stabilizing additive for valley fill material shows potential for controlling building foundation deformation by increasing soil strength and minimizing environmental impacts by maintaining the soil pH and limiting pollutant production.

scholarly journals The Liquefaction Behavior of Poorly Graded Sands Reinforced with Fibers

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Eyyüb Karakan ◽  
Tuğba Eskişar ◽  
Selim Altun
Keyword(s):  
Pore Water ◽  
Fiber Length ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Fiber Content ◽  
Excess Pore Pressure ◽  
Triaxial Tests ◽  
Strong Impact ◽  
Fiber Reinforced ◽  
Excess Pore

This study focuses on the performance of fibers, improving the resistance to liquefaction in loose sands, medium sands, and dense sands in Izmir, Turkey. A systematic testing schedule consisting of cyclic triaxial tests was held under stress-controlled and undrained conditions on saturated sand specimens with and without fiber reinforcements. The major parameters having effects on the dynamic behavior such as fiber content, fiber length, and relative density on the liquefaction behavior and the excess pore water pressure developments of specimens with and without fibers were investigated. If the fiber content or the fiber length was increased in the specimens, higher number of loading cycles was needed in order to experience the liquefaction of sands. The reinforcement effect in medium-dense specimens was found to be apparently distinctive compared to loose specimens. The curves of pore water pressures and shear strains were achieved for the fiber-reinforced sands. The boundaries of pore water pressure curves presented in the literature on the clean sands were utilized in comparison with the pore water pressure curves of fiber-reinforced sands of this study. As a conclusion, the results presented in this study are useful to develop insight into the behavior of clean and fiber-reinforced sands under seismic loading conditions. Based on the test results, it was found that the number of loading cycles had a strong impact on the excess pore pressure generation.

The Test Study to the Changes of Excess Pore Water Pressure during Precast Pile Construction

2012 ◽  
Vol 193-194 ◽  
pp. 1010-1013
Author(s):  
Shu Qing Zhao
Keyword(s):  
Pore Water ◽  
Clayey Soil ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Excess Pore Pressure ◽  
Soil Pressure ◽  
Excess Pore Water Pressure ◽  
Test Study ◽  
Excess Pore

The construct to precast pile in thick clayey soil can cause the accumulation of excess pore water pressure. The high excess pore pressure can make soil, buildings and pipes surrounded have large deflection, even make them injured. Combining with actual projects, this paper presents an in-situ model test on the changes of excess pore water pressure caused by precast pile construct. It is found that the radius of influence range for single pile driven is about 15m，the excess pore water pressure can reach or even exceed the above effective soil pressure, and there are two relatively stable stages.

scholarly journals Mechanical response and pore pressure generation in granular filters subjected to uniaxial cyclic loading

2018 ◽  
Vol 55 (12) ◽  
pp. 1756-1768
Author(s):  
Jahanzaib Israr ◽  
Buddhima Indraratna
Keyword(s):  
Cyclic Loading ◽  
Pore Pressure ◽  
Pore Water ◽  
Mechanical Response ◽  
Pore Water Pressure ◽  
Axial Strain ◽  
Water Pressure ◽  
Internal Erosion ◽  
Excess Pore Water Pressure ◽  
Excess Pore

This paper presents results from a series of piping tests carried out on a selected range of granular filters under static and cyclic loading conditions. The mechanical response of filters subjected to cyclic loading could be characterized in three distinct phases; namely, (I) pre-shakedown, (II) post-shakedown, and (III) post-critical (i.e., the occurrence of internal erosion). All the permanent geomechanical changes such, as erosion, permeability variations, and axial strain developments, took place during phases I and III, while the specimen response remained purely elastic during phase II. The post-critical occurrence of erosion incurred significant settlement that may not be tolerable for high-speed railway substructures. The analysis revealed that a cyclic load would induce excess pore-water pressure, which, in corroboration with steady seepage forces and agitation due to dynamic loading, could then cause internal erosion of fines from the specimens. The resulting excess pore pressure is a direct function of the axial strain due to cyclic densification, as well as the loading frequency and reduction in permeability. A model based on strain energy is proposed to quantify the excess pore-water pressure, and subsequently validated using current and existing test results from published studies.

scholarly journals Application of Effective Stress Model to Analysis of Liquefaction and Seismic Performance of an Earth Dam in China

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Changqing Qi ◽  
Wei Lu ◽  
Jimin Wu ◽  
Xing Liu
Keyword(s):  
Pore Pressure ◽  
Seismic Performance ◽  
Effective Stress ◽  
Earth Dam ◽  
Dam Failure ◽  
Excess Pore Pressure ◽  
Stress Model ◽  
Gravelly Soil ◽  
Excess Pore

Earthquake-induced liquefaction is one of the major causes of catastrophic earth dam failure. In order to assess the liquefaction potential and analyze the seismic performance of an earth dam in Fujian, Southeastern China, the in situ shear wave velocity test was firstly carried out. Results indicate that the gravelly filling is a type of liquefiable soil at present seismic setting. Then the effective stress model was adopted to thoroughly simulate the response of the soil to a proposed earthquake. Numerical result generally coincides with that of the empirical judgment based on in situ test. Negative excess pore pressure developed in the upper part of the saturated gravelly filling and positive excess pore pressure developed in the lower part. The excess pore pressure ratio increases with depth until it reaches a maximum value of 0.45. The displacement of the saturated gravelly soil is relatively small and tolerable. Results show that the saturated gravelly filling cannot reach a fully liquefied state. The dam is overall stable under the proposed earthquake.

Excess Pore Pressures During Undrained Clay Creep

1973 ◽  
Vol 10 (1) ◽  
pp. 12-24 ◽  
Author(s):  
Thomas L. Holzer ◽  
Kaare Höeg ◽  
Kandiah Arulanandan
Keyword(s):  
Pore Pressure ◽  
San Francisco ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Excess Pore Pressure ◽  
Time Behavior ◽  
Pore Pressures ◽  
Undrained Creep ◽  
Excess Pore

The objective of this presentation is to examine experimentally how the excess pore-water pressure is related to the mechanism for undrained creep of San Francisco Bay mud. The results are discussed in the context of creep mechanisms previously suggested in the literature and based on laboratory testing.It is found that shear strains occurring during undrained creep are directly related to a gradual but significant increase in excess pore pressure and, hence, reduction in effective stresses. The increase in magnitude of the pore pressure is, except immediately after the creep shear stress is applied, solely a function of the initial consolidation stress and consolidation period. The magnitude of the long-term build-up may be related to the amount of secondary compression which would occur during drained conditions. It increases with the organic content of the soil and decreases with the degree of remolding. The mechanism for the increase in pore-water pressure may be explained by drainage of water from micropores in the microstructure into the macrostructure.Unless one accounts for the increase in pore pressures during undrained creep, it is unlikely that one will be successful in formulating a generally valid mathematical model for stress–strain–strength–time behavior based on laboratory testing.

Membrane filter properties and application of the filter to undrained cyclic triaxial test of unsaturated materials

2017 ◽  
Vol 54 (8) ◽  
pp. 1196-1202 ◽  
Author(s):  
Hailong Wang ◽  
Junichi Koseki ◽  
Tomoyoshi Nishimura ◽  
Yukika Miyashita
Keyword(s):  
Hydraulic Conductivity ◽  
Cyclic Loading ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Membrane Filter ◽  
Water Pressure ◽  
Characteristic Curve ◽  
Loading Frequency ◽  
Loading Test ◽  
Pressure Plate

Properties of the membrane filter recently introduced as an alternative to the ceramic disk are revealed through diffusion and hydraulic conductivity tests. It is shown that diffusion of air through the membrane filter is significantly affected by suction magnitude and that hydraulic conductivity of the membrane filter can easily be affected by the quality of water used in the test. The application of the membrane filter to the soil-water characteristic curve tests (SWCC tests) shows that similar SWCCs can be obtained by employing pressure plate apparatuses with either the ceramic disks or the membrane filter installed, and that repeatability of the SWCC by using the membrane filter pressure plate apparatus is reasonably good. The application of the membrane filter to the undrained cyclic loading test of unsaturated sandy materials shows that the response (the duration to measure the equilibrated pore-water pressure of unsaturated materials) of the membrane filter pedestal in a modified triaxial system may be as short as ∼2 s in certain test conditions, and fairly good pore-water pressure and air pressure measurements can be obtained during undrained cyclic loading with a loading frequency of 0.1 Hz.

scholarly journals Pore Pressure Response to Groundwater Fluctuations in Saturated Double-Layered Soil

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Hongwei Ying ◽  
Lisha Zhang ◽  
Kanghe Xie ◽  
Dazhong Huang
Keyword(s):  
Pressure Distribution ◽  
Pore Pressure ◽  
Dimensionless Parameter ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Layered Soil ◽  
Excess Pore Pressure ◽  
Groundwater Fluctuation ◽  
Excess Pore Pressures ◽  
Excess Pore

Analytical solutions are developed for one-dimensional consolidation of double-layered saturated soil subjected to groundwater fluctuations. The solutions are derived by an explicit mathematical procedure using Duhamel’s theorem in conjunction with a Fourier series, when groundwater fluctuation is described by a general time-dependent function and assumed to be the pore water pressure variations at the upper boundary. Taking as an example the harmonic groundwater fluctuation, the relevant response of the excess pore water pressure is discussed in detail, and the main influencing factors of the excess pore pressure distribution are analyzed. A dimensionless parameterθhas been introduced because it significantly affects the phase and the amplitude of excess pore pressures. The influences of the coefficients of permeability and compressibility of soil on the excess pore pressure distribution are different and cannot be incorporated into the coefficient of consolidation in double-layered soil. The relative permeability ratio of two clayey soils also plays an important role on the curves of the distributions of the excess pore pressures. The effects of the thickness of the soil layer on the excess pore pressure distribution should be considered together with the dimensionless parameterθand the permeability and compressibility of the double-layered soil system.

scholarly journals Behavior of Nonplastic Silty Soils under Cyclic Loading

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Nazile Ural ◽  
Zeki Gunduz
Keyword(s):  
Pore Pressure ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Clay Content ◽  
Cyclic Stress ◽  
Excess Pore Pressure ◽  
Stress Ratios ◽  
Silty Soils ◽  
Excess Pore

The engineering behavior of nonplastic silts is more difficult to characterize than is the behavior of clay or sand. Especially, behavior of silty soils is important in view of the seismicity of several regions of alluvial deposits in the world, such as the United States, China, and Turkey. In several hazards substantial ground deformation, reduced bearing capacity, and liquefaction of silty soils have been attributed to excess pore pressure generation during dynamic loading. In this paper, an experimental study of the pore water pressure generation of silty soils was conducted by cyclic triaxial tests on samples of reconstituted soils by the slurry deposition method. In all tests silty samples which have different clay percentages were studied under different cyclic stress ratios. The results have showed that in soils having clay content equal to and less than 10%, the excess pore pressure ratio buildup was quicker with an increase in different cyclic stress ratios. When fine and clay content increases, excess pore water pressure decreases constant cyclic stress ratio in nonplastic silty soils. In addition, the applicability of the used criteria for the assessment of liquefaction susceptibility of fine grained soils is examined using laboratory test results.

Sign in / Sign up

Export Citation Format

Share Document