Stability Improvement Method for Embankment Dam with Respect to Conduit Cracks

In recent years, as the number of reservoir embankments constructed has increased, embankment failures due to cracks in aging conduits have also increased. In this study, a crack in a conduit was modeled based on the current conduit design model, and the risk of internal erosion was analyzed using a large-scale model test and three-dimensional deformation–seepage analysis. The results show that when cracks existed in the conduit, soil erosion and cavitation occurred near the crack area, which made the conduit extremely vulnerable to internal erosion. Herein, a model is proposed that can reduce internal erosion by applying a layer of sand and geotextiles on the upper part of the conduit located close to the downstream slope. In the proposed model, only partial erosion occurred inside the conduit, and no cavitation appeared near the crack in the conduit. The results suggest that internal erosion can be suppressed when the water pressure acting intensively on the crack in the conduit is dispersed by the drainage layer. To validate these results, the pore water pressure, seepage line, and hydraulic gradient were investigated to confirm the erosion phenomenon and reinforcement effect.

The Influence of Internal Erosion in Earthen Dams on the Potential Difference Response to Applied Voltage

Internal erosion is widely perceived as contributing to the failure of earthen dams. To reduce the failure risk, timely monitoring of internal erosion is an effective method in observing their internal structure evolution. A set of earthen dam model experiments were conducted. Under an applied voltage, the response potential differences (PD) at the slope of the dam models were collected before and after the impoundment of the upstream reservoir. The discrepancy among the four dam models, the influence of soil moisture content on PD, and the impact of internal erosion on PD were studied. The results show that it is acceptable to employ different dam models to simulate the development of internal erosion, although the discrepancy among the models is inevitable. The moisture content of the soil significantly affects the PD response to applied voltage. The PD increases with an increase in soil moisture content until the soil is saturated. The change in PD is correlated with the development of internal erosion. With the progression of internal erosion, the starting position for the steep increase in PD distribution continues to move toward the dam toe. In addition, the electrode stability is noted to have an effect on measured PD, which requires further studies to be clarified. This study sets the stage for the PD-based monitoring method in observing the evolution of internal erosion in earthen dams.

Design Methodology for Grout Curtains Under Dams Founded on Rock

Grout curtains are commonly constructed under dams to reduce the seepage through the rock foundation. In the design of grout curtains, empirical methods have mainly been used since the introduction of dam foundation grouting. Although empirical methods have been used with success in several projects, they have their limitations, such as poor control of the grout spread, only an indirect consideration of the threat of internal erosion of fracture infillings in the grouted zones, and the risk of hydraulic jacking. This paper presents a theory-based design methodology for grout curtains under dams founded on rock. In the design methodology, the grout curtain is designed as a structural component of the dam. The risk of erosion of fracture infilling material is explicitly accounted for along with the reduction of the hydraulic conductivity of the rock mass, and an optimization of the total uplift force. By applying the proposed design methodology, engineers can create a design better adapted to the prevailing geological and hydrogeological conditions in the rock mass, resulting in more durable grout curtains. The proposed methodology also enables cost and time estimates to be calculated for the grout curtain’s construction. Applying the principles of the observational method during the grouting execution also allows the design to be modified via predefined measures if the initial design is found to be unsuitable.

Internal Instability in Soils: A Critical Review of the Fundamentals and Ramifications

Seepage-induced fine-particle migration that leads to a change in the conductivity of a soil matrix is referred to as internal instability. This could jeopardize the structural integrity of the soil matrix by initiating suffusion (or suffosion), a form of internal erosion. Susceptibility to suffusion has been studied mostly under extreme laboratory conditions to develop empirical design criteria, which are typically based on the particle size distribution. The physics governing the process have not been comprehensively uncovered in the classical studies because of experimental limitations. Mainstream evaluation methods often over-idealize the suffusion process, holding a probabilistic perspective for estimating constriction sizes and fines migration. Prospective studies on constitutive modeling techniques and modern computational techniques have allowed a more representative evaluation and deeper insight into the problem. Recent advances in sensing technologies, visualization, and tracking techniques have equally enriched the quality of the data on suffusion. This paper sets out to present the long-standing knowledge on the internal instability phenomenon in soils. An attempt is made to pinpoint ambiguities and underscore research gaps. The classical empirical studies and modern visualizing techniques are integrated with particle-based numerical simulations to strengthen the theoretical understanding of the phenomenon.