scholarly journals Characterization and Source Identification of Elements and Water-Soluble Ions in Submicrometre Aerosols in Brno and Šlapanice (Czech Republic)

Atmosphere ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 688 ◽  
Author(s):  
Pavel Mikuška ◽  
Martin Vojtěšek ◽  
Kamil Křůmal ◽  
Martina Mikušková-Čampulová ◽  
Jaroslav Michálek ◽  
...  

Submicrometre aerosol particles (particulate matter, PM1) were collected in two Czech cities (Brno and Šlapanice) during week campaigns in winter and summer of 2009 and 2010. The aerosols were analysed for 14 elements and 12 water-soluble ions using inductively coupled plasma–mass spectrometry and ion chromatography techniques. The average PM1 mass concentration was 14.4 and 20.4 µg m−3 in Brno and Šlapanice, respectively. Most of the analysed elements and ions exhibit distinct seasonal variability with higher concentrations in winter in comparison to summer. The determined elements and ions together accounted for about 29% of total PM1 mass, ranging between 16% and 44%. Ion species were the most abundant components in collected aerosols, accounting for 27.2% of mass of PM1 aerosols, and elements accounted for 1.8% of mass of PM1 aerosols. One-day backward trajectories were calculated using the Hysplit model to analyse air masses transported towards the sampling sites. The Pearson correlation coefficients between individual PM1 components and PM1 mass and air temperature were calculated. To identify the main aerosol sources, factor analysis was applied. Six factors were identified for each locality. The following sources of PM1 particles were identified in Brno: a municipal incinerator, vehicle exhausts, secondary sulphate, a cement factory, industry and biomass burning. The identified sources in Šlapanice were as follows: a combustion source, coal combustion, a cement factory, a municipal incinerator, vehicle exhausts and industry.

2011 ◽  
Vol 324 ◽  
pp. 477-480 ◽  
Author(s):  
Adib Kfoury ◽  
P. Yammine ◽  
Frederic Ledoux ◽  
B. El Khoury ◽  
H. El Nakat ◽  
...  

Atmospheric Total Suspended Particles (TSP) were sampled from 16 different points in a coastal industrial region in North Lebanon, between April and October 2008. The samples were analyzed for water soluble ions and metals concentrations using Ion Chromatography (I.C.) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). The results showed possible natural contribution to aerosols through sea salt emissions (Na/Cl-/Mg), and crustal sources (K/Fe/Ti). However, ions such as NH4+, NO3-, and SO42- were attributed to secondary aerosols. Finally, the result of the enrichment factor analysis showed that vehicles’ emissions (Zn/Cu/Pb/Ni/V/Cr), quarries (Ca), and phosphate rocks impurities (Zn/Cd/Cu/Pb) were the most important anthropogenic contributions to the metal’s load in the aerosols.


2012 ◽  
Vol 10 (4) ◽  
pp. 1301-1309 ◽  
Author(s):  
Pavle Đurašković ◽  
Ivana Tošić ◽  
Miroslava Unkašević ◽  
Ljubiša Ignjatović ◽  
Dragana Đorđević

AbstractThe results of content of water-soluble ions measured in 604 samples of precipitation collected in South-Eastern Adriatic region during 6 years have been analyzed. The HYSPLIT model was used to study the air mass paths. Although the ion concentrations of investigated ions in precipitation of air masses from the continental parts of Europe were significant, the total wet deposition is dominated by precipitation coming over the Mediterranean Sea. The sea salt components are significantly correlated. The correlations between Ca2+ and Mg2+, Ca2+ and SO42− and Ca2+ and K+ indicate the main terrigeneous ions.


2017 ◽  
Author(s):  
Jianhua Qi ◽  
Ruifeng Zhang ◽  
Xiaojing Chen ◽  
Xuehui Lin ◽  
Huiwang Gao ◽  
...  

Abstract. To understand the impacts of long-range transport on particulate inorganic nitrogen associated with dust in downwind areas, aerosol samples were collected in the Qingdao coastal region on dust and non-dust (ND) days in spring from 2008 to 2011. The concentrations of water-soluble ions were measured by ion chromatography, with metal elements detected using inductively coupled plasma-atomic emission spectroscopy (ICP-AES) and inductively coupled plasma-mass spectrometry (ICP-MS). Compared to atmospheric aerosols collected on ND days, samples from dust days exhibited higher concentrations of particles and crustal elements. Total aerosol particle concentrations increased by a factor of 5.9 on average dust days. On dust days, the average concentrations of crustal elements (Sc, Al, Fe, Ca and Mg) increased by over a factor of four relative to those on ND days. The inorganic nitrogen content increased 1.2 to 9.2-fold during some dust events in which storms were weak or slow moving and reactions occurred during transport. By contrast, nitrate and ammonium exhibited very low concentrations (


2016 ◽  
Vol 2 (2) ◽  
pp. 71-78
Author(s):  
Yoshika Sekine ◽  
◽  
Nami Takahashi ◽  
Yuri Ohkoshi ◽  
Akihiro Takemasa ◽  
...  

Atmosphere ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 456
Author(s):  
Huimin Jiang ◽  
Zhongqin Li ◽  
Feiteng Wang ◽  
Xi Zhou ◽  
Fanglong Wang ◽  
...  

We investigated water-soluble ions (WSIs) of aerosol samples collected from 2016 to 2017 in Lanzhou, a typical semi-arid and chemical-industrialized city in Northwest China. WSIs concentration was higher in the heating period (35.68 ± 19.17 μg/m3) and lower in the non-heating period (12.45 ± 4.21 μg/m3). NO3−, SO42−, NH4+ and Ca2+ were dominant WSIs. The concentration of SO42− has decreased in recent years, while the NO3− level was increasing. WSIs concentration was affected by meteorological factors. The sulfur oxidation and nitrogen oxidation ratios (SOR and NOR) exceeded 0.1, inferring the vital contribution of secondary transformation. Meanwhile higher O3 concentration and temperature promoted the homogeneous reaction of SO2. Lower temperature and high relative humidity (RH) were more suitable for heterogeneous reactions of NO2. Three-phase cluster analysis illustrated that the anthropogenic source ions and natural source ions were dominant WSIs during the heating and non-heating periods, respectively. The backward trajectory analysis and the potential source contribution function model indicated that Lanzhou was strongly influenced by the Hexi Corridor, northeastern Qinghai–Tibetan Plateau, northern Qinghai province, Inner Mongolia Plateau and its surrounding cities. This research will improve our understanding of the air quality and pollutant sources in the industrial environment.


2021 ◽  
Vol 102 ◽  
pp. 123-137
Author(s):  
Jie Su ◽  
Pusheng Zhao ◽  
Jing Ding ◽  
Xiang Du ◽  
Youjun Dou

Atmosphere ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 926
Author(s):  
Hsing-Wang Li ◽  
Kang-Shin Chen ◽  
Chia-Hsiang Lai ◽  
Ting-Yu Chen ◽  
Yi-Ching Lin ◽  
...  

Atmospheric particulate matters (PMs) were measured in an industry-intensive region in central Taiwan in order to investigate the characteristics and possible sources of PMs. The samplings were simultaneously conducted using a 10- and 3-stage Micro Orifice Uniform Deposit Impactor (MOUDI) from 2017 to 2018. In this study, the characteristics of PMs in this region were evaluated by measuring the mass concentration of PMs and analyzing water-soluble ions and metallic elements, as well as dioxins. Additionally, principal component analysis (PCA) was used to identify the potential sources of PMs. The results showed that the mean concentration of coarse (>1.8 μm), fine (0.1–1.8 μm), and ultrafine (<0.1 μm) particles were 13.60, 14.38, and 3.44 μg/m3, respectively. In the industry-intensive region, the size distribution of ambient particles showed a bi-modal distribution with a high concentration of coarse particles in the spring and summer, while fine particles were dominant in the autumn and winter. The most abundant water-soluble ions of PMs were NO3−, Cl−, and SO42−, while the majority of metallic elements were Na, Fe, Ca, Al, and Mg in different particle sizes. The results of Pearson’s correlation analysis for metals indicated that the particles in the collected air samples were related to the iron and steelmaking industries, coal burning, vehicle exhausts, and high-tech industries. The dioxin concentration ranged from 0.0006 to 0.0017 pg I-TEQ/Nm3. Principal component analysis (PCA) revealed that the contribution to PMs was associated with sea salt, secondary pollutants, and industrial process.


Author(s):  
Shuang Wang ◽  
Mandeep Kaur ◽  
Tengfei Li ◽  
Feng Pan

The present study was planned to explore the pollution characteristics, health risks, and influence of atmospheric fine particulate matter (PM2.5) and its components on blood routine parameters in a typical industrial city (Xinxiang City) in China. In this study, 102 effective samples 28 (April–May), 19 (July–August), 27 (September–October), 28 (December–January) of PM2.5 were collected during different seasons from 2017 to 2018. The water-soluble ions and metal elements in PM2.5 were analyzed via ion chromatography and inductively coupled plasma–mass spectrometry. The blood routine physical examination parameters under different polluted weather conditions from January to December 2017 and 2018, the corresponding PM2.5 concentration, temperature, and relative humidity during the same period were collected from Second People’s Hospital of Xinxiang during 2017–2018. Risk assessment was carried out using the generalized additive time series model (GAM). It was used to analyze the influence of PM2.5 concentration and its components on blood routine indicators of the physical examination population. The “mgcv” package in R.3.5.3 statistical software was used for modeling and analysis and used to perform nonparametric smoothing on meteorological indicators such as temperature and humidity. When Akaike’s information criterion (AIC) value is the smallest, the goodness of fit of the model is the highest. Additionally, the US EPA exposure model was used to evaluate the health risks caused by different heavy metals in PM2.5 to the human body through the respiratory pathway, including carcinogenic risk and non-carcinogenic risk. The result showed that the air particulate matter and its chemical components in Xinxiang City were higher in winter as compared to other seasons with an overall trend of winter > spring > autumn > summer. The content of nitrate (NO3−) and sulfate (SO42−) ions in the atmosphere were higher in winter, which, together with ammonium, constitute the main components of water-soluble ions in PM2.5 in Xinxiang City. Source analysis reported that mobile pollution sources (coal combustion emissions, automobile exhaust emissions, and industrial emissions) in Xinxiang City during the winter season contributed more to atmospheric pollution as compared to fixed sources. The results of the risk assessment showed that the non-carcinogenic health risk of heavy metals in fine particulate matter is acceptable to the human body, while among the carcinogenic elements, the order of lifetime carcinogenic risk is arsenic (As) > chromium(Cr) > cadmium (Cd) > cobalt(Co) > nickel (Ni). During periods of haze pollution, the exposure concentration of PM2.5 has a certain lag effect on blood routine parameters. On the day when haze pollution occurs, when the daily average concentration of PM2.5 rises by 10 μg·m−3, hemoglobin (HGB) and platelet count (PLT) increase, respectively, by 9.923% (95% CI, 8.741–11.264) and 0.068% (95% CI, 0.067–0.069). GAM model analysis predicted the maximum effect of PM2.5 exposure concentration on red blood cell count (RBC) and PLT was reached when the hysteresis accumulates for 1d (Lag0). The maximum effect of exposure concentration ofPM2.5 on MONO is reached when the lag accumulation is 3d (Lag2). When the hysteresis accumulates for 6d (Lag5), the exposure concentration of PM2.5 has the greatest effect on HGB. The maximum cumulative effect of PM2.5 on neutrophil count (NEUT) and lymphocyte (LMY) was strongest when the lag was 2d (Lag1). During periods of moderate to severe pollution, the concentration of water-soluble ions and heavy metal elements in PM2.5 increases significantly and has a significant correlation with some blood routine indicators.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Rasa Zalakeviciute ◽  
Katiuska Alexandrino ◽  
Yves Rybarczyk ◽  
Alexis Debut ◽  
Karla Vizuete ◽  
...  

Abstract Particulate matter (PM) is one of the key pollutants causing health risks worldwide. While the preoccupation for increased concentrations of these particles mainly depends on their sources and thus chemical composition, some regions are yet not well investigated. In this work the composition of chemical elements of atmospheric PM10 (particles with aerodynamic diameters ≤ 10 µm), collected at the urban and suburban sites in high elevation tropical city, were chemically analysed during the dry and wet seasons of 2017–2018. A large fraction (~ 68%) of PM10 composition in Quito, Ecuador is accounted for by water-soluble ions and 16 elements analysed using UV/VIS spectrophotometer and Inductively Coupled Plasma—Optical Emission Spectroscopy (ICP-OES). Hierarchical clustering analysis was performed to study a correlation between the chemical composition of urban pollution and meteorological parameters. The suburban area displays an increase in PM10 concentrations and natural elemental markers during the dry (increased wind intensity, resuspension of soil dust) season. Meanwhile, densely urbanized area shows increased total PM10 concentrations and anthropogenic elemental markers during the wet season, which may point to the worsened combustion and traffic conditions. This might indicate the prevalence of cardiovascular and respiratory problems in motorized areas of the cities in the developing world.


Sign in / Sign up

Export Citation Format

Share Document