scholarly journals Cyclonic Wave Simulations Based on WAVEWATCH-III Using a Sea Surface Drag Coefficient Derived from CFOSAT SWIM Data

Atmosphere ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1610
Author(s):  
Weizeng Shao ◽  
Tao Jiang ◽  
Yu Zhang ◽  
Jian Shi ◽  
Weili Wang

It is well known that numerical models are powerful methods for wave simulation of typhoons, where the sea surface drag coefficient is sensitive to strong winds. With the development of remote sensing techniques, typhoon data (i.e., wind and waves) have been captured by optical and microwave satellites such as the Chinese-French Oceanography SATellite (CFOSAT). In particular, wind and wave spectra data can be simultaneously measured by the Surface Wave Investigation and Monitoring (SWIM) onboard CFOSAT. In this study, existing parameterizations for the drag coefficient are implemented for typhoon wave simulations using the WAVEWATCH-III (WW3) model. In particular, a parameterization of the drag coefficient derived from sea surface roughness is adopted by considering the terms for wave steepness and wave age from the measurements from SWIM products of CFOSAT from 20 typhoons during 2019–2020 at winds up to 30 m/s. The simulated significant wave height (Hs) from the WW3 model was validated against the observations from several moored buoys active during three typhoons, i.e., Typhoon Fung-wong (2014), Chan-hom (2015), and Lekima (2019). The analysis results indicated that the proposed parameterization of the drag coefficient significantly improved the accuracy of typhoon wave estimation (a 0.49 m root mean square error (RMSE) of Hs and a 0.35 scatter index (SI)), greater than the 0.55 RMSE of Hs and >0.4 SI using other existing parameterizations. In this sense, the adopted parameterization for the drag coefficient is recommended for typhoon wave simulations using the WW3 model, especially for sea states with Hs < 7 m. Moreover, the accuracy of simulated waves was not reduced with growing winds and sea states using the proposed parameterization. However, the applicability of the proposed parameterization in hurricanes necessitates further investigation at high winds (>30 m/s).

2021 ◽  
Vol 9 (11) ◽  
pp. 1248
Author(s):  
Jian Shi ◽  
Zhihao Feng ◽  
Yuan Sun ◽  
Xueyan Zhang ◽  
Wenjing Zhang ◽  
...  

The sea surface drag coefficient plays an important role in momentum transmission between the atmosphere and the ocean, which is affected by ocean waves. The total air–sea momentum flux consists of effective momentum flux and sea spray momentum flux. Sea spray momentum flux involves sea surface drag, which is largely affected by the ocean wave state. Under strong winds, the sea surface drag coefficient (CD) does not increase linearly with the increasing wind speed, namely, the increase of CD is inhibited by strong winds. In this study, a sea surface drag coefficient is constructed that can be applied to the calculation of the air–sea momentum flux under high wind speed. The sea surface drag coefficient also considers the influence of wave state and sea spray droplets generated by wave breaking. Specially, the wave-dependent sea spray generation function is employed to calculate sea spray momentum flux. This facilitates the analysis not only on the sensitivity of the sea spray momentum flux to wave age, but also on the effect of wave state on the effective CD (CD, eff) under strong winds. Our results indicate that wave age plays an important role in determining CD. When the wave age is >0.4, CD decreases with the wave age. However, when the wave age is ≤0.4, CD increases with the wave age at low and moderate wind speeds but tends to decrease with the wave age at high wind speeds.


2021 ◽  
Vol 9 (3) ◽  
pp. 246
Author(s):  
Difu Sun ◽  
Junqiang Song ◽  
Xiaoyong Li ◽  
Kaijun Ren ◽  
Hongze Leng

A wave state related sea surface roughness parameterization scheme that takes into account the impact of sea foam is proposed in this study. Using eight observational datasets, the performances of two most widely used wave state related parameterizations are examined under various wave conditions. Based on the different performances of two wave state related parameterizations under different wave state, and by introducing the effect of sea foam, a new sea surface roughness parameterization suitable for low to extreme wind conditions is proposed. The behaviors of drag coefficient predicted by the proposed parameterization match the field and laboratory measurements well. It is shown that the drag coefficient increases with the increasing wind speed under low and moderate wind speed conditions, and then decreases with increasing wind speed, due to the effect of sea foam under high wind speed conditions. The maximum values of the drag coefficient are reached when the 10 m wind speeds are in the range of 30–35 m/s.


Author(s):  
I.A. Repina ◽  
A.Yu. Artamonov ◽  
M.I. Varentsov ◽  
A.V. Kozyrev ◽  
◽  
...  

2011 ◽  
Vol 30 (2) ◽  
pp. 14-24 ◽  
Author(s):  
Jian Shi ◽  
Zhong Zhong ◽  
Ruijie Li ◽  
Yan Li ◽  
Wenyu Sha

Author(s):  
Yuji SUGIHARA ◽  
Takuya ANDO ◽  
Takuro SAEKI ◽  
Shigeatsu SERIZAWA ◽  
Hiroshi YOSHIOKA

Author(s):  
I.A. Repina ◽  
A.Yu. Artamonov ◽  
M.I. Varentsov ◽  
A.V. Kozyrev ◽  
◽  
...  

Atmosphere ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1485
Author(s):  
Zhiqiu Gao ◽  
Shaohui Zhou ◽  
Jianbin Zhang ◽  
Zhihua Zeng ◽  
Xueyan Bi

The drag coefficient is essential for calculating the aerodynamic friction between air and sea. In this study, we regress a set of relationships between the drag coefficient and the wind speed for different wind ranges using an observational dataset that consists of 5941 estimates of the mean flow and fluxes from 11 aircraft turbulent measurements over the sea surface. Results show that: (1) the drag coefficient is a power function of wind speed over smooth sea surface when it is no greater than 4.5 ms−1, and the drag coefficient decreases with the increase of wind speed; and (2) for rough sea surface, when the wind speed is greater than 4.5 ms−1 and less than or equal to 10.5 ms−1, the drag coefficient increases linearly with the increase of horizontal wind speed; when the wind speed is greater than 10.5 ms−1 and less than or equal to 33.5 ms−1, the drag coefficient changes parabolically with the increase of wind speed; when the wind speed is greater than 33.5 ms−1, the drag coefficient is constant. Additionally, regressed from drag coefficient, the saturated wind speed threshold is 23 ms−1. Parameterizations of turbulent heat transfer coefficient (Ch) and water vapor transfer coefficient (Ce) are also investigated.


2020 ◽  
Author(s):  
Maksim Vdovin ◽  
Georgy Baydakov ◽  
Daniil Sergeev ◽  
Yuliya Troitskaya

&lt;p&gt;Wind-wave interaction at extreme wind speed is of special interest now in connection with the problem of explanation of the sea surface drag saturation at the wind speed exceeding 30 m/s. Now it is established that at hurricane wind speed the sea surface drag coefficient is significantly reduced in comparison with the parameterization obtained at moderate to strong wind conditions.&lt;/p&gt;&lt;p&gt;The subject of this work is investigation of aerodynamic resistance of the waved water surface under severe wind conditions (up to U10 &amp;#8776; 50 m/s). Laboratory experiments were carried out at the new high-speed wind-wave flume in the Large Thermally Stratified Tank (at the Institute of Applied Physics, Russia) built in 2019. The main difference between the new wind-wave flume and the old one is the absence of a pressure gradient along the main axis of the new flume. Aerodynamic resistance of the water surface was measured by the profile method with Pitot tube. A method for data processing taking into account the self-similarity of the air flow velocity profile in the aerodynamic tube was applied for retrieving wind friction velocity and surface drag coefficients. Simultaneously with the airflow velocity measurements, the wind-wave field parameters in the flume were investigated by system of wire gauges.&lt;/p&gt;&lt;p&gt;Analysis of the wind velocity profiles and wind-wave spectra showed tendency to decrease for surface drag coefficient for wind speed exceeding 25 m/s simultaneously with the mean square slope and significant wave height.&lt;/p&gt;&lt;p&gt;&lt;span&gt;Acknowledgments&lt;/span&gt; &lt;br&gt;This work was carried out with the financial support of the RFBR according to the research project 18-55-50005, 20-05-00322, 18-35-20068, 18-05-00265. Data processing was carried out with the financial support of Russian Science Foundation grant 19-17-00209.&lt;/p&gt;


Sign in / Sign up

Export Citation Format

Share Document