scholarly journals Abatement of 1,2,4-Trichlorobencene by Wet Peroxide Oxidation Catalysed by Goethite and Enhanced by Visible LED Light at Neutral pH

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 139
Author(s):  
David Lorenzo ◽  
Aurora Santos ◽  
Andrés Sánchez-Yepes ◽  
Leandro Óscar Conte ◽  
Carmen María Domínguez

There is significant environmental concern about chlorinated organic compounds (COCs) in wastewater, surface water, and groundwater due to their low biodegradability and high persistence. In this work, 1,2,4-trichlorobenzene (124-TCB) was selected as a model compound to study its abatement using wet peroxide oxidation at neutral pH with goethite as a heterogeneous catalyst, which was enhanced with visible monochromatic light-emitting diode (LED) light (470 nm). A systematic study of the main operating variables (oxidant and catalyst concentration and irradiance) was accomplished to investigate their influence in the abatement of 124-TCB in water. The reaction was carried out in a well-mixed reactor of glass irradiated by a visible LED light. The hydrogen peroxide concentration was tested from 0 to 18 mM, the goethite concentration within the range 0.1–1.0 g·L−1 and the irradiance from 0.10 to 0.24 W·cm−2 at neutral pH. It was found that this oxidation method is a very efficient technique to abate 124-TCB, reaching a pollutant conversion of 0.9 when using 0.1 g·L−1 of goethite, 18 mM of H2O2, and 0.24 of W·cm−2. Moreover, the system performance was evaluated using the photonic efficiency (ratio of the moles of 124-TCB abated and the moles of photons arriving at the reactor window). The maximum photonic efficiencies were obtained using the lowest lamp powers and moderate to high catalyst loads.

Crystals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 335 ◽  
Author(s):  
Wei-Hsiung Tseng ◽  
Diana Juan ◽  
Wei-Cheng Hsiao ◽  
Cheng-Han Chan ◽  
Hsin-Yi Ma ◽  
...  

In this study, our proposed ultraviolet light-emitting diode (UV LED) mosquito-trapping lamp is designed to control diseases brought by insects such as mosquitoes. In order to enable the device to efficiently catch mosquitoes in a wider area, a secondary freeform lens (SFL) is designed for UV LED. The lens is mounted on a 3 W UV LED light bar as a mosquito-trapping lamp of the new UV LED light bar module to achieve axially symmetric light intensity distribution. The special SFL is used to enhance the trapping capabilities of the mosquito-trapping lamp. The results show that when the secondary freeform surface lens is applied to the experimental outdoor UV LED mosquito-trapping lamp, the trapping range can be expanded to 100π·m2 and the captured mosquitoes increased by about 300%.


2021 ◽  
Vol 11 (9) ◽  
pp. 4035
Author(s):  
Jinsheon Kim ◽  
Jeungmo Kang ◽  
Woojin Jang

In the case of light-emitting diode (LED) seaport luminaires, they should be designed in consideration of glare, average illuminance, and overall uniformity. Although it is possible to implement light distribution through auxiliary devices such as reflectors, it means increasing the weight and size of the luminaire, which reduces the feasibility. Considering the special environment of seaport luminaires, which are installed at a height of 30 m or more, it is necessary to reduce the weight of the device, facilitate replacement, and secure a light source with a long life. In this paper, an optimized lens design was investigated to provide uniform light distribution to meet the requirement in the seaport lighting application. Four types of lens were designed and fabricated to verify the uniform light distribution requirement for the seaport lighting application. Using numerical analysis, we optimized the lens that provides the required minimum overall uniformity for the seaport lighting application. A theoretical analysis for the heatsink structure and shape were conducted to reduce the heat from the high-power LED light sources up to 250 W. As a result of these analyses on the heat dissipation characteristics of the high-power LED light source used in the LED seaport luminaire, the heatsink with hexagonal-shape fins shows the best heat dissipation effect. Finally, a prototype LED seaport luminaire with an optimized lens and heat sink was fabricated and tested in a real seaport environment. The light distribution characteristics of this prototype LED seaport luminaire were compared with a commercial high-pressure sodium luminaire and metal halide luminaire.


RSC Advances ◽  
2020 ◽  
Vol 10 (66) ◽  
pp. 40450-40460
Author(s):  
Carlos Andrés Vallejo ◽  
Luis Alejandro Galeano ◽  
Raquel Trujillano ◽  
Miguel Ángel Vicente ◽  
Antonio Gil

Significantly intensified preparation of Al/Fe-hydrolysed-pillaring solutions and solvent-free intercalation of bentonites yielding Al/Fe-PILCs highly active in catalytic wet peroxide oxidation.


RSC Advances ◽  
2015 ◽  
Vol 5 (52) ◽  
pp. 41867-41876 ◽  
Author(s):  
Yang Yu ◽  
Huangzhao Wei ◽  
Li Yu ◽  
Tong Zhang ◽  
Sen Wang ◽  
...  

Organic synthesis is used to investigate the degradation of m-cresol and the intermediates are identified by in situ NMR.


2005 ◽  
Vol 31 (6) ◽  
pp. 481-484
Author(s):  
Kazuyoshi Suzuki ◽  
Kiyokazu Okawa ◽  
Toshihiro Takeshita ◽  
Katsuyuki Nakano ◽  
Toyokazu Yokomaku

2016 ◽  
Vol 199 ◽  
pp. 170-186 ◽  
Author(s):  
Rui S. Ribeiro ◽  
Zacharias Frontistis ◽  
Dionissios Mantzavinos ◽  
Danae Venieri ◽  
Maria Antonopoulou ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document