scholarly journals Improved Genetic Algorithm for Phase-Balancing in Three-Phase Distribution Networks: A Master-Slave Optimization Approach

Computation ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 67
Author(s):  
Oscar Danilo Montoya ◽  
Alexander Molina-Cabrera ◽  
Luis Fernando Grisales-Noreña ◽  
Ricardo Alberto Hincapié ◽  
Mauricio Granada
Keyword(s):  
Genetic Algorithm ◽  
Reactive Power ◽  
Search Algorithm ◽  
Peak Load ◽  
Distribution Networks ◽  
Numerical Results ◽  
Optimization Approach ◽  
Three Phase ◽  
Operative Costs ◽  
Power Curves

This paper addresses the phase-balancing problem in three-phase power grids with the radial configuration from the perspective of master–slave optimization. The master stage corresponds to an improved version of the Chu and Beasley genetic algorithm, which is based on the multi-point mutation operator and the generation of solutions using a Gaussian normal distribution based on the exploration and exploitation schemes of the vortex search algorithm. The master stage is entrusted with determining the configuration of the phases by using an integer codification. In the slave stage, a power flow for imbalanced distribution grids based on the three-phase version of the successive approximation method was used to determine the costs of daily energy losses. The objective of the optimization model is to minimize the annual operative costs of the network by considering the daily active and reactive power curves. Numerical results from a modified version of the IEEE 37-node test feeder demonstrate that it is possible to reduce the annual operative costs of the network by approximately 20% by using optimal load balancing. In addition, numerical results demonstrated that the improved version of the CBGA is at least three times faster than the classical CBGA, this was obtained in the peak load case for a test feeder composed of 15 nodes; also, the improved version of the CBGA was nineteen times faster than the vortex search algorithm. Other comparisons with the sine–cosine algorithm and the black hole optimizer confirmed the efficiency of the proposed optimization method regarding running time and objective function values.

scholarly journals Genetic-Convex Model for Dynamic Reactive Power Compensation in Distribution Networks Using D-STATCOMs

2021 ◽  
Vol 11 (8) ◽  
pp. 3353
Author(s):  
Oscar Danilo Montoya ◽  
Harold R. Chamorro ◽  
Lazaro Alvarado-Barrios ◽  
Walter Gil-González ◽  
César Orozco-Henao
Keyword(s):  
Objective Function ◽  
Optimal Power Flow ◽  
Reactive Power ◽  
Programming Model ◽  
Distribution Networks ◽  
Optimal Placement ◽  
Mixed Integer ◽  
Energy Losses ◽  
Optimization Approach ◽  
Operative Costs

This paper proposes a new hybrid master–slave optimization approach to address the problem of the optimal placement and sizing of distribution static compensators (D-STATCOMs) in electrical distribution grids. The optimal location of the D-STATCOMs is identified by implementing the classical and well-known Chu and Beasley genetic algorithm, which employs an integer codification to select the nodes where these will be installed. To determine the optimal sizes of the D-STATCOMs, a second-order cone programming reformulation of the optimal power flow problem is employed with the aim of minimizing the total costs of the daily energy losses. The objective function considered in this study is the minimization of the annual operative costs associated with energy losses and installation investments in D-STATCOMs. This objective function is subject to classical power balance constraints and device capabilities, which generates a mixed-integer nonlinear programming model that is solved with the proposed genetic-convex strategy. Numerical validations in the 33-node test feeder with radial configuration show the proposed genetic-convex model’s effectiveness to minimize the annual operative costs of the grid when compared with the optimization solvers available in GAMS software.

scholarly journals Optimal Integration of Photovoltaic Sources in Distribution Networks for Daily Energy Losses Minimization Using the Vortex Search Algorithm

2021 ◽  
Vol 11 (10) ◽  
pp. 4418
Author(s):  
Alejandra Paz-Rodríguez ◽  
Juan Felipe Castro-Ordoñez ◽  
Oscar Danilo Montoya ◽  
Diego Armando Giral-Ramírez
Keyword(s):  
Objective Function ◽  
Power Flow ◽  
Search Algorithm ◽  
Peak Load ◽  
Distribution Networks ◽  
Energy Losses ◽  
Continuous Version ◽  
Continuous Section ◽  
Daily Energy ◽  
Discrete Part

This paper deals with the optimal siting and sizing problem of photovoltaic (PV) generators in electrical distribution networks considering daily load and generation profiles. It proposes the discrete-continuous version of the vortex search algorithm (DCVSA) to locate and size the PV sources where the discrete part of the codification defines the nodes. Renewable generators are installed in these nodes, and the continuous section determines their optimal sizes. In addition, through the successive approximation power flow method, the objective function of the optimization model is obtained. This objective function is related to the minimization of the daily energy losses. This method allows determining the power losses in each period for each renewable generation input provided by the DCVSA (i.e., location and sizing of the PV sources). Numerical validations in the IEEE 33- and IEEE 69-bus systems demonstrate that: (i) the proposed DCVSA finds the optimal global solution for both test feeders when the location and size of the PV generators are explored, considering the peak load scenario. (ii) In the case of the daily operative scenario, the total reduction of energy losses for both test feeders are 23.3643% and 24.3863%, respectively; and (iii) the DCVSA presents a better numerical performance regarding the objective function value when compared with the BONMIN solver in the GAMS software, which demonstrates the effectiveness and robustness of the proposed master-slave optimization algorithm.

scholarly journals Optimal Sizing and Placement of Capacitor Banks in Distribution Networks Using a Genetic Algorithm

Electricity ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 187-204
Author(s):  
Gian Giuseppe Soma
Keyword(s):  
Genetic Algorithm ◽  
Electricity Market ◽  
Distribution Systems ◽  
Reactive Power ◽  
Electricity Consumption ◽  
Distribution Networks ◽  
Optimal Placement ◽  
Capacitor Banks ◽  
Control Pattern ◽  
Definition Of

Nowadays, response to electricity consumption growth is mainly supported by efficiency; therefore, this is the new main goal in the development of electric distribution networks, which must fully comply with the system’s constraints. In recent decades, the issue of independent reactive power services, including the optimal placement of capacitors in the grid due to the restructuring of the electricity industry and the creation of a competitive electricity market, has received attention from related companies. In this context, a genetic algorithm is proposed for optimal planning of capacitor banks. A case study derived from a real network, considering the application of suitable daily profiles for loads and generators, to obtain a better representation of the electrical conditions, is discussed in the present paper. The results confirmed that some placement solutions can be obtained with a good compromise between costs and benefits; the adopted benefits are energy losses and power factor infringements, taking into account the network technical limits. The feasibility and effectiveness of the proposed algorithm for optimal placement and sizing of capacitor banks in distribution systems, with the definition of a suitable control pattern, have been proved.

scholarly journals Optimal Selection of Conductors in Three-Phase Distribution Networks Using a Discrete Version of the Vortex Search Algorithm

Computation ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 80
Author(s):  
John Fernando Martínez-Gil ◽  
Nicolas Alejandro Moyano-García ◽  
Oscar Danilo Montoya ◽  
Jorge Alexander Alarcon-Villamil
Keyword(s):  
Objective Function ◽  
Power Flow ◽  
Phase Distribution ◽  
Search Algorithm ◽  
Distribution Networks ◽  
Discrete Version ◽  
Optimal Selection ◽  
Flow Method ◽  
Three Phase ◽  
Selection Of

In this study, a new methodology is proposed to perform optimal selection of conductors in three-phase distribution networks through a discrete version of the metaheuristic method of vortex search. To represent the problem, a single-objective mathematical model with a mixed-integer nonlinear programming (MINLP) structure is used. As an objective function, minimization of the investment costs in conductors together with the technical losses of the network for a study period of one year is considered. Additionally, the model will be implemented in balanced and unbalanced test systems and with variations in the connection of their loads, i.e., Δ− and Y−connections. To evaluate the costs of the energy losses, a classical backward/forward three-phase power-flow method is implemented. Two test systems used in the specialized literature were employed, which comprise 8 and 27 nodes with radial structures in medium voltage levels. All computational implementations were developed in the MATLAB programming environment, and all results were evaluated in DigSILENT software to verify the effectiveness and the proposed three-phase unbalanced power-flow method. Comparative analyses with classical and Chu & Beasley genetic algorithms, tabu search algorithm, and exact MINLP approaches demonstrate the efficiency of the proposed optimization approach regarding the final value of the objective function.

scholarly journals Efficient Operative Cost Reduction in Distribution Grids Considering the Optimal Placement and Sizing of D-STATCOMs Using a Discrete-Continuous VSA

2021 ◽  
Vol 11 (5) ◽  
pp. 2175
Author(s):  
Oscar Danilo Montoya ◽  
Walter Gil-González ◽  
Jesus C. Hernández
Keyword(s):  
Objective Function ◽  
Reactive Power ◽  
Programming Model ◽  
Search Algorithm ◽  
Solution Space ◽  
Distribution Networks ◽  
Optimal Placement ◽  
Mixed Integer ◽  
Solution Vector ◽  
The Impact

The problem of reactive power compensation in electric distribution networks is addressed in this research paper from the point of view of the combinatorial optimization using a new discrete-continuous version of the vortex search algorithm (DCVSA). To explore and exploit the solution space, a discrete-continuous codification of the solution vector is proposed, where the discrete part determines the nodes where the distribution static compensator (D-STATCOM) will be installed, and the continuous part of the codification determines the optimal sizes of the D-STATCOMs. The main advantage of such codification is that the mixed-integer nonlinear programming model (MINLP) that represents the problem of optimal placement and sizing of the D-STATCOMs in distribution networks only requires a classical power flow method to evaluate the objective function, which implies that it can be implemented in any programming language. The objective function is the total costs of the grid power losses and the annualized investment costs in D-STATCOMs. In addition, to include the impact of the daily load variations, the active and reactive power demand curves are included in the optimization model. Numerical results in two radial test feeders with 33 and 69 buses demonstrate that the proposed DCVSA can solve the MINLP model with best results when compared with the MINLP solvers available in the GAMS software. All the simulations are implemented in MATLAB software using its programming environment.

3D Generalized Beam (GB) Lattice Model for Analysis of the Failure of Concrete

2013 ◽  
Vol 652-654 ◽  
pp. 1455-1465
Author(s):  
Han Wang ◽  
Ming Hao Zhao ◽  
Ji Gao ◽  
Guang Yuan Wang
Keyword(s):  
Lattice Model ◽  
Peak Load ◽  
Computational Effort ◽  
Numerical Results ◽  
Particle Content ◽  
Three Phase ◽  
3D Effects ◽  
Fracture Processes ◽  
Beam Lattice

Concrete is usually described as a three-phase material, where matrix, aggregate and interface zones are distinguished. The beam lattice model has been applied widely by many investigators to simulate fracture processes in concrete. Due to the extremely large computational effort, however, the beam lattice model faces practical difficulties. Moreover, real fracture processes are 3D and not 2D. In our investigation, a new 3D lattice called generalized beam (GB) lattice is developed to reduce computational effort. Numerical results obtained by the model are in agreement to what are observed in tests. The 3D effects of the particle content on the peak load and ductility are discussed as well as the 3D fracturing phenomenon.

Sign in / Sign up

Export Citation Format

Share Document