scholarly journals Learning the Macroscopic Flow Model of Short Fiber Suspensions from Fine-Scale Simulated Data

Entropy ◽  
2019 ◽  
Vol 22 (1) ◽  
pp. 30
Author(s):  
Minyoung Yun ◽  
Clara Argerich Martin ◽  
Pierre Giormini ◽  
Francisco Chinesta ◽  
Suresh Advani

Fiber–fiber interaction plays an important role in the evolution of fiber orientation in semi-concentrated suspensions. Flow induced orientation in short-fiber reinforced composites determines the anisotropic properties of manufactured parts and consequently their performances. In the case of dilute suspensions, the orientation evolution can be accurately described by using the Jeffery model; however, as soon as the fiber concentration increases, fiber–fiber interactions cannot be ignored anymore and the final orientation state strongly depends on the modeling of those interactions. First modeling frameworks described these interactions from a diffusion mechanism; however, it was necessary to consider richer descriptions (anisotropic diffusion, etc.) to address experimental observations. Even if different proposals were considered, none of them seem general and accurate enough. In this paper we do not address a new proposal of a fiber interaction model, but a data-driven methodology able to enrich existing models from data, that in our case comes from a direct numerical simulation of well resolved microscopic physics.

2011 ◽  
Vol 8 (62) ◽  
pp. 1314-1331 ◽  
Author(s):  
Irwin M. Zaid ◽  
Jörn Dunkel ◽  
Julia M. Yeomans

Swimming micro-organisms rely on effective mixing strategies to achieve efficient nutrient influx. Recent experiments, probing the mixing capability of unicellular biflagellates, revealed that passive tracer particles exhibit anomalous non-Gaussian diffusion when immersed in a dilute suspension of self-motile Chlamydomonas reinhardtii algae. Qualitatively, this observation can be explained by the fact that the algae induce a fluid flow that may occasionally accelerate the colloidal tracers to relatively large velocities. A satisfactory quantitative theory of enhanced mixing in dilute active suspensions, however, is lacking at present. In particular, it is unclear how non-Gaussian signatures in the tracers' position distribution are linked to the self-propulsion mechanism of a micro-organism. Here, we develop a systematic theoretical description of anomalous tracer diffusion in active suspensions, based on a simplified tracer-swimmer interaction model that captures the typical distance scaling of a microswimmer's flow field. We show that the experimentally observed non-Gaussian tails are generic and arise owing to a combination of truncated Lévy statistics for the velocity field and algebraically decaying time correlations in the fluid. Our analytical considerations are illustrated through extensive simulations, implemented on graphics processing units to achieve the large sample sizes required for analysing the tails of the tracer distributions.


2017 ◽  
Vol 835 ◽  
pp. 393-405 ◽  
Author(s):  
Sheng Chen ◽  
Peng Gao ◽  
Tong Gao

We study the complex dynamics of a two-dimensional suspension comprising non-motile active particles confined in an annulus. A coarse-grained liquid crystal model is employed to describe the nematic structure evolution, and is hydrodynamically coupled with the Stokes equation to solve for the induced active flows in the annulus. For dilute suspensions, coherent structures are captured by varying the particle activity and gap width, including unidirectional circulations, travelling waves and chaotic flows. For concentrated suspensions, the internal collective dynamics features motile disclination defects and flows at finite gap widths. In particular, we observe an intriguing quasi-steady-state at certain gap widths during which $+1/2$-order defects oscillate around equilibrium positions accompanying travelling-wave flows that switch circulating directions periodically. We perform linear stability analyses to reveal the underlying physical mechanisms of pattern formation during a concatenation of instabilities.


1999 ◽  
Vol 43 (4) ◽  
pp. 1005-1018 ◽  
Author(s):  
Colin Servais ◽  
André Luciani ◽  
Jan-Anders E. Månson

MRS Bulletin ◽  
1991 ◽  
Vol 16 (8) ◽  
pp. 32-37 ◽  
Author(s):  
Richard L. Hoffman

Numerous commercial products either exist as concentrated suspensions of small particles or involve the processing of concentrated suspensions during some stage of their manufacture. Examples include foods, adhesives and glues, ceramic dispersions, paints, and polymer dispersions such as polyvinyl chloride plastisols. As a result, it is important for engineers to understand the flow behavior of these systems and how the flow behavior affects the way these materials can be processed.For mahy years, progress in understanding the flow behavior of concentrated suspensions was slow compared to progress on dilute systems, partly because of how the study of suspensions evolved. Building on Einstein's classical work for dilute suspensions of rigid spheres, many authors attempted to modify his equations to predict the flow behavior of more concentrated suspensions, but the extension of Einstein's work met with limited success, because nonhydrodynamic interactions cari be just as important as the hydrodynamic interactions considered by Einstein, and multiple particle interactions quickly complicate the problem as the particle concentration increases.


2020 ◽  
Author(s):  
Dionissios Hristopulos ◽  
Vasiliki Agou ◽  
Andreas Pavlides ◽  
Panagiota Gkafa

<p>We present recent advances related to Stochastic Local Interaction (SLI) models. These probabilistic models capture local correlations by means of suitably constructed precision matrices which are inferred from the available data. SLI models share features with Gaussian Markov random fields, and they can be used to complete spatial and spatiotemporal datasets with missing data.  SLI models are applicable to data sampled on both regular and irregular space-time grids.  The SLI models can also incorporate space-time trend functions. The degree of localization provided by SLI models is determined by means of kernel functions and appropriate bandwidths that adaptively determine local neighborhoods around each point of interest (including points in the sampling set and the map grid). The local neighborhoods lead to sparse precision (inverse covariance) matrices and also to explicit, semi-analytical relations for predictions, which are based on the conditional mean and the conditional variance.</p><p>We focus on a simple SLI model whose parameter set involves amplitude and rigidity coefficients as well as a characteristic length scale. The SLI precision matrix is expressed explicitly in terms of the model parameter and the kernel function. The parameter estimation is based on the method of maximum likelihood estimation (MLE). However, covariance matrix inversion is not required, since the precision matrix is known conditionally on the model parameters. In addition, the calculation of the precision matrix determinant can be efficiently performed computationally given the sparsity of the precision matrix.  Typical values of the sparsity index obtained by analyzing various environmental datasets are less than 1%. </p><p>We discuss the results of SLI predictive performance with both real and simulated data sets. We find that in terms of cross validation measures the performance of the method is similar to ordinary kriging while the computations are faster.  Overall, the SLI model takes advantage of sparse precision matrix structure to reduce the computational memory and time required for the processing of large spatiotemporal datasets.  </p><p><strong> </strong></p><p><strong>References</strong></p><ol><li>D. T. Hristopulos. Stochastic local interaction (SLI) model: Bridging machine learning and geostatistics. Computers and Geosciences, 85(Part B):26–37, December 2015. doi:10.1016/j.cageo.2015.05.018.</li> <li>D. T. Hristopulos and V. D. Agou. Stochastic local interaction model for space-time data. Spatial Statistics, page 100403, 2019. doi:10.1016/j.spasta.2019.100403.</li> <li>D. T. Hristopulos, A. Pavlides, V. D. Agou, P. Gkafa. Stochastic local interaction model for geostatistical analysis of big spatial datasets, 2019. arXiv:2001.02246</li> </ol>


2016 ◽  
Vol 23 (3) ◽  
pp. 345-356 ◽  
Author(s):  
Xueyu Pang ◽  
Christian Meyer

AbstractA particle-based C3S hydration model, which mathematically connects a nucleation and growth controlled mechanism with a diffusion controlled mechanism, is developed in this study. The model is first formulated and fitted with C3S hydration in stirred dilute suspensions in Part I where interactions between different particles can be ignored, and further developed and fitted with Portland cement paste hydration in Part II to account for inter-particle interactions. Excellent agreement was observed between experimental and modeled results. Three critical rate-controlling parameters, including a parallel growth rate constant, a perpendicular growth rate constant and a diffusion constant, were identified from the proposed model. The dependencies of these parameters on particle size and initial quantity of nuclei are investigated in Part I while their dependencies on cement composition, water-cement ratio, and curing condition are studied in Part II.


Entropy ◽  
2021 ◽  
Vol 23 (9) ◽  
pp. 1229
Author(s):  
Rabih Mezher ◽  
Jack Arayro ◽  
Nicolas Hascoet ◽  
Francisco Chinesta

The present study addresses the discrete simulation of the flow of concentrated suspensions encountered in the forming processes involving reinforced polymers, and more particularly the statistical characterization and description of the effects of the intense fiber interaction, occurring during the development of the flow induced orientation, on the fibers’ geometrical center trajectory. The number of interactions as well as the interaction intensity will depend on the fiber volume fraction and the applied shear, which should affect the stochastic trajectory. Topological data analysis (TDA) will be applied on the geometrical center trajectories of the simulated fiber to prove that a characteristic pattern can be extracted depending on the flow conditions (concentration and shear rate). This work proves that TDA allows capturing and extracting from the so-called persistence image, a pattern that characterizes the dependence of the fiber trajectory on the flow kinematics and the suspension concentration. Such a pattern could be used for classification and modeling purposes, in rheology or during processing monitoring.


2017 ◽  
Vol 31 (11) ◽  
pp. 1529-1544 ◽  
Author(s):  
Huan-Chang Tseng ◽  
Rong-Yeu Chang ◽  
Chia-Hsiang Hsu

The microstructures of injection-molded short fiber composites, involving fiber orientation and fiber concentration, strikingly influence flow behaviors and mechanical properties. Through the use of certain commercial software, reported numerical predictions of fiber orientation for the shell–core structure have been obtained to date. However, no work has been done on fiber concentration prediction available in processing simulations. In the theoretical field of suspension rheology, the suspension balance (SB) model has proven successful in capturing particle migration behavior under the simple Couette shear flow of “spherical” particle suspension, hence the attempt to verify the SB model applied in the “like-rod” suspensions. To predict flow-induced variations of fiber concentration, the SB model is implemented in 3-D-injection molding simulation with more general flows. It is remarkable for the shell–core structure is explored to reflect the relationship between fiber orientation and fiber concentration.


Sign in / Sign up

Export Citation Format

Share Document