scholarly journals A Full-Duplex LED-to-LED Visible Light Communication System

Electronics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 1713
Author(s):  
Hyunwoo Jung ◽  
Sung-Man Kim
Keyword(s):  
Visible Light ◽  
Bit Error Rate ◽  
Error Rate ◽  
Signal To Noise Ratio ◽  
Light Emitting Diode ◽  
Visible Light Communication ◽  
Full Duplex ◽  
Signal To Noise ◽  
Light Emitting ◽  
Half Duplex

We experimentally demonstrated full-duplex light-emitting diode (LED)-to-LED visible light communication (VLC) using LEDs as the transmitter and receiver. Firstly, we investigated the performance dependency on the wavelengths of the LED transmitter and receiver by measuring the rise time and signal-to-noise ratio (SNR). Through the investigation, we were able to choose the optimal LED color set for LED-to-LED VLC using Shannon’s channel capacity law. The bit error rate (BER) results of full-duplex and half-duplex LED-to-LED VLC systems with the optimal LED sets are shown to compare the performance. Furthermore, we discuss major distortions and signal losses in the full-duplex LED-to-LED VLC system.

scholarly journals Designing of an Indoor Visible Light Communication Transceiver for Data Transmission using White LED

2016 ◽  
Author(s):  
Ha Duyen Trung ◽  
Do Trong Tuan
Keyword(s):  
Visible Light ◽  
Signal To Noise Ratio ◽  
Light Emitting Diode ◽  
Image Transmission ◽  
Visible Light Communication ◽  
Symbol Error Rate ◽  
Data Rate ◽  
Full Duplex ◽  
Light Emitting ◽  
Environment Experiment

Abstract: In this paper, a prototype of full-duplex indoor  Visible  Light  Communication  (VLC) transceiver  is  designed  to  demonstrate  an  optical wireless  system  based  on  Universal  Serial  Bus (USB) port for data transmissions using white Light Emitting  Diode  (LED).  Based  on  VLC  technology, the  designed  system  consists  of  transmitters  and receivers can achieve data rate of 161.2 Kbps error free at the distance of 92 cm between two computers for  real-time  text  and  image  transmission  over indoor  environment.  Experiment  results  show  that for text transmission, symbol error rate (SER) does not  vary  data  rate  at  some  transmission  distances, whereas  for  image  transmission,  minimum  square error (MSE) and peak signal to noise ratio (PSNR) indicate  that  the  received  image  and  transmitted image were almost similar.

An approach to ensure joint illumination & communication performance of a forward error corrected indoor visible light communication (VLC) system in presence of ambient light interference

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Sourish Chatterjee ◽  
Biswanath Roy
Keyword(s):  
Visible Light ◽  
Bit Error Rate ◽  
Error Rate ◽  
Light Emitting Diode ◽  
Visible Light Communication ◽  
Ambient Light ◽  
Ambient Illumination ◽  
Communication Performance ◽  
Light Interference ◽  
Forward Error

AbstractIn recent time of looming radio frequency (RF) spectrum crisis, visible light communication using lighting infrastructure emerged as a potential alternative at an indoor environment. This paper addresses the setback associated with ambient light interference in an indoor Visible Light Communication (VLC) system to ensure joint communication and illumination performance inside an office room. A novel VLC architecture with suitable white light emitting diode (WLED) luminaire arrangement is presented to minimize the dispersion of signal to interference plus noise ratio (SINR) across the room. Luminaires are categorized in two groups viz. data transmitting illuminants and illuminants for lighting purpose. The first group is dedicated to transmit data as well as serves the purpose of illumination. The other set creates only ambient illumination to achieve quality lighting attributes. The proposed forward error corrected receiver configuration discards the ambient light noise originated by the illuminants that serve the ambient illumination. Tail biting convolutional encoder and viterbi decoder are used at the encoding section of the transmitter and decoding section of the receiver respectively to improve bit error rate. Results obtained through MATLAB simulation shows better average bit error rate (BER) in the order of 10−8 measured at uniformly distributed 25 grid points over the working plane. At the same time achieved average horizontal illuminance with good uniformity comply with ISO recommendation.

ANALISIS SENSITIVITAS VIDEO MPEG-4 BERDASARKAN STRUKTUR FRAME PADA TRANSMISI DVB-T

2020 ◽  
Vol 25 (2) ◽  
pp. 86-97
Author(s):  
Sandy Suryo Prayogo ◽  
Tubagus Maulana Kusuma
Keyword(s):  
Deep Learning ◽  
Bit Error Rate ◽  
Error Rate ◽  
Signal To Noise Ratio ◽  
Similarity Index ◽  
Structural Similarity ◽  
Signal To Noise ◽  
Structural Similarity Index ◽  
Noise Ratio

DVB merupakan standar transmisi televisi digital yang paling banyak digunakan saat ini. Unsur terpenting dari suatu proses transmisi adalah kualitas gambar dari video yang diterima setelah melalui proses transimisi tersebut. Banyak faktor yang dapat mempengaruhi kualitas dari suatu gambar, salah satunya adalah struktur frame dari video. Pada tulisan ini dilakukan pengujian sensitifitas video MPEG-4 berdasarkan struktur frame pada transmisi DVB-T. Pengujian dilakukan menggunakan simulasi matlab dan simulink. Digunakan juga ffmpeg untuk menyediakan format dan pengaturan video akan disimulasikan. Variabel yang diubah dari video adalah bitrate dan juga group-of-pictures (GOP), sedangkan variabel yang diubah dari transmisi DVB-T adalah signal-to-noise-ratio (SNR) pada kanal AWGN di antara pengirim (Tx) dan penerima (Rx). Hasil yang diperoleh dari percobaan berupa kualitas rata-rata gambar pada video yang diukur menggunakan metode pengukuran structural-similarity-index (SSIM). Dilakukan juga pengukuran terhadap jumlah bit-error-rate BER pada bitstream DVB-T. Percobaan yang dilakukan dapat menunjukkan seberapa besar sensitifitas bitrate dan GOP dari video pada transmisi DVB-T dengan kesimpulan semakin besar bitrate maka akan semakin buruk nilai kualitas gambarnya, dan semakin kecil nilai GOP maka akan semakin baik nilai kualitasnya. Penilitian diharapkan dapat dikembangkan menggunakan deep learning untuk memperoleh frame struktur yang tepat di kondisi-kondisi tertentu dalam proses transmisi televisi digital.

Long-Distance Visible Light Communication Based on Light Emitting Diode Source

2017 ◽  
Vol 54 (5) ◽  
pp. 050602
Author(s):  
张宇飞 Zhang Yufei ◽  
张洪明 Zhang Hongming ◽  
王鹏 Wang Peng ◽  
刘涛 Liu Tao ◽  
孙德栋 Sun Dedong ◽  
...  
Keyword(s):  
Visible Light ◽  
Light Emitting Diode ◽  
Visible Light Communication ◽  
Long Distance ◽  
Light Emitting

scholarly journals Experimental Implementation and Theoretical Investigation of a Vanadium Dioxide Optical Filter for Bit Error Rate Enhancement of Enhanced Space Shift Keying Visible Light Communication Systems

Computation ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 30 ◽  
Author(s):  
Dimitra K. Manousou ◽  
Argyris N. Stassinakis ◽  
Emmanuel Syskakis ◽  
Hector E. Nistazakis ◽  
Spiros Gardelis ◽  
...  
Keyword(s):  
Visible Light ◽  
Bit Error Rate ◽  
Error Rate ◽  
Vanadium Dioxide ◽  
Background Noise ◽  
Communication Systems ◽  
Optical Filter ◽  
Optical Filters ◽  
Visible Light Communication ◽  
Performance Estimation

Visible Light Communication (VLC) systems use light-emitting diode (LED) technology to provide high-capacity optical links. The advantages they offer, such as the high data rate and the low installation and operational cost, have identified them as a significant solution for modern networks. However, such systems are vulnerable to various exogenous factors, with the background sunlight noise having the greatest impact. In order to reduce the negative influence of the background noise effect, optical filters can be used. In this work, for the first time, a low-cost optical vanadium dioxide (VO2) optical filter has been designed and experimentally implemented based on the requirements of typical and realistic VLC systems in order to significantly increase their performance by reducing the transmittance of background noise. The functionality of the specific filter is investigated by means of its bit error rate (BER) performance estimation, taking into account its experimentally measured characteristics. Numerous results are provided in order to prove the significant performance enhancement of the VLC systems which, as it is shown, reaches almost six orders of magnitude in some cases, using the specific experimental optical filter.

scholarly journals Polarization Differential Visible Light Communication: Theory and Experimental Evaluation

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5661
Author(s):  
Jorik De Bruycker ◽  
Willem Raes ◽  
Stanislav Zvánovec ◽  
Nobby Stevens
Keyword(s):  
Visible Light ◽  
Communication Theory ◽  
Rotation Angle ◽  
Signal To Noise Ratio ◽  
Visible Light Communication ◽  
Signal Quality ◽  
Polarization Direction ◽  
Signal To Noise ◽  
Research Attention ◽  
Analytical Expression

Visible Light Communication (VLC) has received substantial research attention in the last decade. The vast majority of VLC focuses on the modulation of the transmitted light intensity. In this work, however, the intensity is kept constant while the polarization direction is deployed as a carrier of information. Demodulation is realized by using a differential receiver pair equipped with mutually orthogonal polarizers. An analytical expression to evaluate the Signal-to-Noise Ratio (SNR) as a function of the rotation angle of the receiver is derived. It is demonstrated that the signal quality can deteriorate heavily with receiver orientation when using a single differential receiver pair. A way to overcome this drawback using two receiver pairs is described. The analytical expression is experimentally verified through measurements with two different receiver setups. This work demonstrates the potential of polarization-based modulation in the field of VLC, where receiver rotation robustness has been achieved by means of a dedicated quadrant photodiode receiver.

Sign in / Sign up

Export Citation Format

Share Document