scholarly journals Planning of High Renewable-Penetrated Distribution Systems Considering Complementarity and Cluster Partitioning

Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2090 ◽  
Author(s):  
Di Hu ◽  
Ming Ding ◽  
Lei Sun ◽  
Jingjing Zhang
Keyword(s):  
Distribution Systems ◽  
Benders Decomposition ◽  
Ideal Point ◽  
Planning Model ◽  
Renewable Energy Resources ◽  
Variance Matrix ◽  
Cluster Partition ◽  
Two Factors ◽  
Power Outputs ◽  
Partition Method

Photovoltaic (PV) and wind power (WT) resources can influence each other in some scenarios, and this influence tends to show that the rise of PV resources may indicate the drop of WT resources, and vice versa. This pattern of PV and WT resources influencing each other is called the complementary characteristics of PV and WT power. The complementary characteristics of the power outputs of different kinds of distributed renewable energy resources (DRERs) and the correlation between DRERs outputs and loads can impact the consumption of DRERs by the loads within the grid, which represents the rate of DRER outputs consumed by loads instead of being reduced. In this regard, this paper investigates a planning strategy for DRERs considering these two factors. An improved co-variance matrix method is applied to generate complementary samples of DRERs and correlated samples of DRERs and loads. The samples generated are used to study the impacts of the degree of correlation between DRERs and loads on the consumption ability of DRERs. The concept of the cluster is introduced as a region including DRERs with complementary characteristics. Based on the cluster partition method and the samples generated, the DRERs planning model is proposed to maximize the profits of different DRER stakeholders. The planning model is transformed into a single objective model through the ideal point method. A Benders decomposition-based method is developed to efficiently solve the proposed model, and an actual network in China is used to illustrate its performance. The results show DRER consumption can be significantly improved by the proposed planning model.

scholarly journals Cooperation of Voltage Controlled Active Power Filter with Grid-Connected DGs in Microgrid

2018 ◽  
Vol 11 (1) ◽  
pp. 154 ◽  
Author(s):  
Hafiz Munir ◽  
Jianxiao Zou ◽  
Chuan Xie ◽  
Josep Guerrero
Keyword(s):  
Power Distribution ◽  
Distribution Systems ◽  
Active Power Filter ◽  
Active Power ◽  
Current Control ◽  
Control Loop ◽  
Renewable Energy Resources ◽  
Harmonic Compensation ◽  
Power Filter ◽  
Voltage Feedback

Due to the excessive use of nonlinear loads and inverter interfaced distributed generators, harmonic issues have been regarded as a major concern in power distribution systems. Therefore, harmonic compensation in microgrids is a subject of current interest. Consequently, a novel direct harmonic voltage-controlled mode (VCM) active power filter (APF) is proposed to mitigate the harmonics in a cooperative manner and provide a better harmonic compensation performance of less than 5%. Due to the dispersive characteristics of renewable energy resources, voltage feedback based on a harmonic compensation control loop is implemented for the first time. This system can be smoothly combined with the current control loop. Our method proposes a better performance while mitigating the harmonics in comparison with conventional resistive active power filters (R-APF). Based on direct voltage detection at the point of common coupling (PCC), the proposed VCM-APF can therefore be seamlessly incorporated with multiple grid-connected generators (DGs) to enhance their harmonic compensation capabilities. The advantage of this scheme is that it avoids the need for designing and tuning the resistance, which was required in earlier conventional control schemes of R-APF for voltage unbalance compensation. Additionally, our scheme does not require the grid and load current measurements since these can be carried out at the PCC voltage, which further reduces the implementation cost of the system. Furthermore, the simulation results show the significance of proposed method.

A Novel Multi-Functional Grid-Connected Inverter of Renewable Energy Resources

2013 ◽  
Vol 448-453 ◽  
pp. 2191-2194
Author(s):  
Lei Zhou ◽  
Hong Da Liu ◽  
Ming Jie Chen ◽  
Nai Jun Shen
Keyword(s):  
Renewable Energy ◽  
Distribution Systems ◽  
Reactive Power ◽  
Control Strategies ◽  
Renewable Energy Sources ◽  
Unit Vector ◽  
Renewable Energy Resources ◽  
Point Of Common Coupling ◽  
Grid Connected Inverter ◽  
And Control

On the basis of analyzing the synthesis application of p-q (instantaneous reactive power) theory and unit vector template, a multi-functional grid-connected inverter (MFGCI) with auxiliary services on power quality enhancement in micro-grid (MG) is presented. The novel control strategy for achieving maximum benefits from these MFGCI when installed in AC MG access to 3-phase 4-wire distribution systems by isolated transformer at the point of common coupling (PCC). This kind of inverter can not only deliver the power generation of renewable energy sources (RESs), but also can perform as active power filter (APF) at their PCC as well as can improve the efficiency of inverter and decrease the hardware investment. Finally, both feasibility and effectiveness of this new topologies and control strategies of MFGCI are verified by PSCAD/EMTDC.

Planning of Distribution System with High Penetration Level for Distributed Generation in Smart Grid

2018 ◽  
Vol 8 (3) ◽  
Author(s):  
Reza Tajik
Keyword(s):  
Smart Grid ◽  
Power Systems ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Distribution Networks ◽  
Planning Problem ◽  
Renewable Energy Resources ◽  
Power Distribution System ◽  
High Penetration

Nowadays, the utilization of renewable energy resources in distribution systems (DSs) has been rapidly increased. Since distribution generation (DG) use renewable resources (i.e., biomass, wind and solar) are emerging as proper solutions for electricity generation. Regarding the tremendous deployment of DG, common distribution networks are undergoing a transition to DSs, and the common planning methods have become traditional in the high penetration level. Indeed, in conformity with the voltage violation challenge of these resources, this problem must be dealt with too. So, due to the high penetration of DG resources and nonlinear nature of most industrial loads, the planning of DG installation has become an important issue in power systems. The goal of this paper is to determine the planning of DG in distribution systems through smart grid to minimize losses and control grid factors. In this regard, the present work intending to propose a suitable method for the planning of DSs, the key properties of DS planning problem are evaluated from the various aspects, such as the allocation of DGs, and planning, and high-level uncertainties. Also depending on these analyses, this universal literature review addressed the updated study associated with DS planning. In this work, an operational design has been prepared for a higher performance of the power distribution system in the presence of DG. Artificial neural network (ANN) has been used as a method for voltage monitoring and generation output optimization. The findings of the study show that the proposed method can be utilized as a technique to improve the process of the distribution system under various penetration levels and in the presence of DG. Also, the findings revealed that the optimal use of ANN method leads to more controllable and apparent DS.

Distribution Systems Reconfiguration Based on OPF Using Benders Decomposition

2009 ◽  
Vol 24 (4) ◽  
pp. 2166-2176 ◽  
Author(s):  
H. M. Khodr ◽  
J. Martinez-Crespo ◽  
M. A. Matos ◽  
J. Pereira
Keyword(s):  
Distribution Systems ◽  
Benders Decomposition

A Survey on Smart Grid Distributed Power Flow: IEC61850, IEC 61499 and Intelligent Controls

2014 ◽  
Vol 573 ◽  
pp. 346-351
Author(s):  
G.S. Satheesh Kumar ◽  
Chinnadurai Nagarajan ◽  
M. Lizzy Nesa Bagyam
Keyword(s):  
Renewable Energy ◽  
Smart Grid ◽  
Power Distribution ◽  
Distribution System ◽  
Distribution Systems ◽  
Greenhouse Gas Emission ◽  
Energy Resources ◽  
Renewable Energy Resources ◽  
Reconfigurable Software ◽  
Iec 61499

A Recent concept of distribution infrastructure plays a vital role in the efficient utilization of energy. To avoid global warming and greenhouse gas emission, carbon based power plant should be replaced with distributed renewable energy (DRE) such as wind, solar etc. Renewable energy resources can be integrated to grid by intelligent electronic devices (IED). This paper deals with the novel automation architecture that supports power distribution systems to avoid power blackout and also it briefs the major requirement of the smart grid distribution system needed for a competitive world. International standard IEC 61850 and IEC 61499 provides a solution for substation automation through intelligent logical nodes (ILNs) which enhances interoperability and configurability.Later an open source platform is used for enhancing the communication that automatically generates the data model and communication nodes for intelligent electronic devices.However for future requirements in smart grid, the addition of new functions as well as the adaptation of function for IEDs is necessary. A concept of reconfigurable software architecture is introduced for integrating distributed and renewable energy resources. Such interfaces and services provide adaptation of the functional structure and contribute efficient Smart Grid system. This survey summarizes the communication infrastructure of smart energy system.

Sign in / Sign up

Export Citation Format

Share Document