scholarly journals Hydrodynamic Equilibrium Simulation and Shut-in Time Optimization for Hydraulically Fractured Shale Gas Wells

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 961
Author(s):  
Fei Wang ◽  
Qiaoyun Chen ◽  
Yingqi Ruan
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Fluid Loss ◽  
Hydraulic Fractures ◽  
Hydraulic Pressure ◽  
Gas Wells ◽  
Fracturing Fluid ◽  
Equilibrium Time ◽  
Chemical Osmosis ◽  
Hydrodynamic Equilibrium

Post-fracturing well shut-in is traditionally due to the elastic closure of hydraulic fractures and proppant compaction. However, for shale gas wells, the extension of shut-in time may improve the post-fracturing gas production due to formation energy supplements by fracturing-fluid imbibition. This paper presents a methodology using numerical simulation to simulate the hydrodynamic equilibrium phenomenon of a hydraulically fractured shale gas reservoir, including matrix imbibition and fracture network crossflow, and further optimize the post-fracturing shut-in time. A mathematical model, which can describe the fracturing-fluid hydrodynamic transport during the shut-in process, and consider the distinguishing imbibition characteristics of a hydraulically fractured shale reservoir, i.e., hydraulic pressure, capillarity and chemical osmosis, is developed. The key concept, i.e., hydrodynamic equilibrium time, for optimizing the post-fracturing shut-in schedule, is proposed. The fracturing-fluid crossflow and imbibition profiles are simulated, which indicate the water discharging and sucking equilibrium process in the coupled fracture–matrix system. Based on the simulation, the hydrodynamic equilibrium time is calculated. The influences of hydraulic pressure difference, capillarity and chemical osmosis on imbibition volume, and hydrodynamic equilibrium time are also investigated. Finally, the optimal shut-in time is determined if the gas production rate is pursued and the fracturing-fluid loss is allowable. The proposed simulation method for determining the optimal shut-in time is meaningful to the post-fracturing shut-in schedule.

Lithology and sedimentary heterogeneity of the Longmaxi Shale in the southern Sichuan Basin, China

2021 ◽  
pp. 1-49
Author(s):  
Boling Pu ◽  
Dazhong Dong ◽  
Ning Xin-jun ◽  
Shufang Wang ◽  
Yuman Wang ◽  
...  
Keyword(s):  
Continental Shelf ◽  
Deep Water ◽  
Shale Gas ◽  
Sichuan Basin ◽  
Sedimentary Environment ◽  
Gas Production ◽  
Carbonaceous Shale ◽  
Gas Wells ◽  
Longmaxi Shale ◽  
Siliceous Shale

Producers have always been eager to know the reasons for the difference in the production of different shale gas wells. The Southern Sichuan Basin in China is one of the main production zones of Longmaxi shale gas, while the shale gas production is quite different in different shale gas wells. The Longmaxi formation was deposited in a deep water shelf that had poor circulation with the open ocean, and is composed of a variety of facies that are dominated by fine-grained (clay- to silt-size) particles with a varied organic matter distribution, causing heterogeneity of the shale gas concentration. According to the different mother debris and sedimentary environment, we recognized three general sedimentary subfacies and seven lithofacies on the basis of mineralogy, sedimentary texture and structures, biota and the logging response: (1) there are graptolite-rich shale facies, siliceous shale facies, calcareous shale facies, and a small amount of argillaceous limestone facies in the deep - water shelf in the Weiyuan area and graptolite-rich shale facies and carbonaceous shale facies in the Changning area; (2) there are argillaceous shale facies and argillaceous limestone facies in the semi - deep - water continental shelf of the Weiyuan area and silty shale facies in the Changning area; (3) argillaceous shale facies are mainly developed in the shallow muddy continental shelf in the Weiyuan area, while silty shale facies mainly developed in the shallow shelf in the Changning area. Judging from the biostratigraphy of graptolite, the sedimentary environment was different in different stages.

Analysis of Fractured Sections in Shale Gas Wells Based on PCA - Logistic Regression Model

2020 ◽  
Vol 980 ◽  
pp. 483-492
Author(s):  
Lei Ji ◽  
Ju Hua Li ◽  
Guan Qun Li ◽  
Jia Lin Xiao ◽  
Sean Unrau
Keyword(s):  
Logistic Regression ◽  
Shale Gas ◽  
Logistic Regression Model ◽  
Gas Production ◽  
Gas Wells ◽  
Gas Reservoirs ◽  
Discriminant Model ◽  
Economic Exploitation ◽  
High Production ◽  
Pca Algorithm

In order to optimize the layout and economic exploitation of horizontal fracturing wells and completion in shale gas reservoirs, we propose a model for evaluating shale gas fractured sections based on an improved principle component analysis (PCA) algorithm with logistic regression. The 229 gas production sections in 22 fractured shale gas wells in the main block of the Fuling Shale Development Demonstration Zone were selected, and PCA is used for dimensionalite reduction. According to the PCA results, 6 key parameters are chosen to determine the productivity of fractured wells. Taking the probability distribution of high production after fracturing as the research objective, a logistic regression discriminant model was constructed using the dichotomy method. The prediction results show that the model has 82.1% accuracy and is reliable. The model can be used to classify and gas wells to be fractured, and it provides guiding significance for reasonable optimization of well sections in the area selected for fracturing.

scholarly journals CO2 as a fracturing fluid: Potential for commercial-scale shale gas production and CO2 sequestration

2014 ◽  
Vol 63 ◽  
pp. 7780-7784 ◽  
Author(s):  
Richard Middleton ◽  
Hari Viswanathan ◽  
Robert Currier ◽  
Rajan Gupta
Keyword(s):  
Shale Gas ◽  
Co2 Sequestration ◽  
Gas Production ◽  
Fracturing Fluid ◽  
Commercial Scale ◽  
Fluid Potential

scholarly journals Numerical Simulation Study on Seepage Theory of a Multi-Section Fractured Horizontal Well in Shale Gas Reservoirs Based on Multi-Scale Flow Mechanisms

Energies ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 2329 ◽  
Author(s):  
Chao Tang ◽  
Xiaofan Chen ◽  
Zhimin Du ◽  
Ping Yue ◽  
Jiabao Wei
Keyword(s):  
Shale Gas ◽  
Large Scale ◽  
Gas Diffusion ◽  
Gas Production ◽  
Hydraulic Fractures ◽  
Klinkenberg Effect ◽  
Stimulated Reservoir Volume ◽  
Multi Scale ◽  
Reservoir Volume ◽  
Flow Mechanisms

Aimed at the multi-scale fractures for stimulated reservoir volume (SRV)-fractured horizontal wells in shale gas reservoirs, a mathematical model of unsteady seepage is established, which considers the characteristics of a dual media of matrix and natural fractures as well as flow in the large-scale hydraulic fractures, based on a discrete-fracture model. Multi-scale flow mechanisms, such as gas desorption, the Klinkenberg effect, and gas diffusion are taken into consideration. A three-dimensional numerical model based on the finite volume method is established, which includes the construction of spatial discretization, calculation of average pressure gradient, and variable at interface, etc. Some related processing techniques, such as boundedness processing upstream and downstream of grid flow, was used to limit non-physical oscillation at large-scale hydraulic fracture interfaces. The sequential solution is performed to solve the pressure equations of matrix, natural, and large-scale hydraulic fractures. The production dynamics and pressure distribution of a multi-section fractured horizontal well in a shale gas reservoir are calculated. Results indicate that, with the increase of the Langmuir volume, the average formation pressure decreases at a slow rate. Simultaneously, the initial gas production and the contribution ratio of the desorbed gas increase. With the decrease of the pore size of the matrix, gas diffusion and the Klinkenberg effect have a greater impact on shale gas production. By changing the fracture half-length and the number of fractured sections, we observe that the production process can not only pursue the long fractures or increase the number of fractured sections, but also should optimize the parameters such as the perforation position, cluster spacing, and fracturing sequence. The stimulated reservoir volume can effectively control the shale reservoir.

Immediate Gas Production from Shale Gas Wells: A Two-Phase Flowback Model

2014 ◽  
Author(s):  
O.A. Adefidipe ◽  
H. Dehghanpour ◽  
C.J. Virues
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Gas Wells ◽  
Two Phase

scholarly journals History Matching and Forecast of Shale Gas Production Considering Hydraulic Fracture Closure

Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1634 ◽  
Author(s):  
Juhyun Kim ◽  
Youngjin Seo ◽  
Jihoon Wang ◽  
Youngsoo Lee
Keyword(s):  
Shale Gas ◽  
Hydraulic Fracture ◽  
History Matching ◽  
Gas Flow ◽  
Fluid Pressure ◽  
Gas Production ◽  
Hydraulic Fractures ◽  
Gas Reservoirs ◽  
Shale Gas Reservoirs ◽  
Fracture Closure

Most shale gas reservoirs have extremely low permeability. Predicting their fluid transport characteristics is extremely difficult due to complex flow mechanisms between hydraulic fractures and the adjacent rock matrix. Recently, studies adopting the dynamic modeling approach have been proposed to investigate the shape of the flow regime between induced and natural fractures. In this study, a production history matching was performed on a shale gas reservoir in Canada’s Horn River basin. Hypocenters and densities of the microseismic signals were used to identify the hydraulic fracture distributions and the stimulated reservoir volume. In addition, the fracture width decreased because of fluid pressure reduction during production, which was integrated with the dynamic permeability change of the hydraulic fractures. We also incorporated the geometric change of hydraulic fractures to the 3D reservoir simulation model and established a new shale gas modeling procedure. Results demonstrate that the accuracy of the predictions for shale gas flow improved. We believe that this technique will enrich the community’s understanding of fluid flows in shale gas reservoirs.

Sign in / Sign up

Export Citation Format

Share Document