scholarly journals A Deep-Learning-Based Oil-Well-Testing Stage Interpretation Model Integrating Multi-Feature Extraction Methods

Energies ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 2042
Author(s):  
Xin Feng ◽  
Qiang Feng ◽  
Shaohui Li ◽  
Xingwei Hou ◽  
Shugui Liu
Keyword(s):  
Feature Extraction ◽  
Classification Accuracy ◽  
Extraction Methods ◽  
Support Vector ◽  
Well Testing ◽  
Generalization Ability ◽  
Classical Feature ◽  
Testing Stage ◽  
Field Samples ◽  
Interpretation Model

The interpretation of well-testing data is a key means of decision-making support for oil and gas field development. However, conventional processing methods have many problems, such as the stochastic nature of the data, feature redundancies, the randomness of the initial weights or thresholds, and fluctuations in the generalization ability with slight changes in the network parameters. These result in a poor ability to characterize data features and a low generalization ability of the interpretation models. We propose a new integrated well-testing interpretation model based on a multi-feature extraction method and deep mutual information classifiers (MFE-DMIC). This model can avoid the low model classification accuracy caused by the simple training structures, lacking of redundancy elimination, and the non-optimal classifier configuration parameters. First, we obtained the initial features according to four classical feature extraction methods. Then, we eliminated feature redundancies using a deep belief network and united the maximum information coefficient method to achieve feature purification. Finally, we calculated the interpretation results using a hybrid particle swarm optimization–support vector machine classification system. We used 572 well-testing field samples, including five working stages, for model training and testing. The results show that the MFE-DMIC model had the highest total stage classification accuracy of 98.18% as well as the least of features (nine) compared with the classical feature extraction and classification methods and their combinations. The proposed model can reduce the efforts of oil analysts and allow accurate labeling of samples to be predicted.

Learning Advanced Brain Computer Interface Technology

2019 ◽  
Vol 15 (3) ◽  
pp. 14-27
Author(s):  
Wang Tao ◽  
Wu Linyan ◽  
Li Yanping ◽  
Gao Nuo ◽  
Zhang Weiran
Keyword(s):  
Feature Extraction ◽  
Classification Accuracy ◽  
Wavelet Packet ◽  
Extraction Methods ◽  
Support Vector ◽  
Wavelet Packet Analysis ◽  
Accuracy Rate ◽  
Desirable Outcome ◽  
Eeg Data ◽  
System Data

Feature extraction is an important step in electroencephalogram (EEG) processing of motor imagery, and the feature extraction of EEG directly affects the final classification results. Through the analysis of various feature extraction methods, this article finally selects Common Spatial Patterns (CSP) and wavelet packet analysis (WPA) to extract the feature and uses Support Vector Machine (SVM) to classify and compare these extracted features. For the EEG data provided by GRAZ University, the accuracy rate of feature extraction using CSP algorithm is 85.5%, and the accuracy rate of feature extraction using wavelet packet analysis is 92%. Then this paper analyzes the EEG data collected by Emotiv epoc+ system. The classification accuracy of wavelet packet extracted features can still be maintained at more than 80%, while the classification accuracy of CSP extracted feature is decreased obviously. Experimental results show that the method of wavelet packet analysis towards competition data and Emotiv epoc+ system data can both get a desirable outcome.

Electromyography (EMG) based Classification of Finger Movements using SVM

2018 ◽  
Vol 8 (3) ◽  
Author(s):  
Nurazrin Mohd Esa ◽  
Azlan Mohd Zain ◽  
Mahadi Bahari
Keyword(s):  
Feature Extraction ◽  
Control System ◽  
Classification Accuracy ◽  
Extraction Methods ◽  
Myoelectric Control ◽  
Support Vector ◽  
Zero Crossing ◽  
Single Root ◽  
Artificial Hand

Myoelectric control prostheses hand are currently popular developing clinical option that offers amputee person to control their artificial hand by analyzing the contacting muscle residual. Myoelectric control system contains three main phase which are data segmentation, feature extraction and classification. The main factor that affect the performance of myoelectric control system is the choice of feature extraction methods. There are two types of feature extraction technique used to extract the signal which are the Hudgins feature consist of Zero Crossing, Waveform Length (WL), Sign Scope Change (SSC) and Mean Absolute Value (MAV), the single Root Mean Square (RMS). Then, the combination of both is proposed in this study. An analysis of these different techniques result were examine to achieve a favorable classification accuracy (CA). Our outcomes demonstrate that the combination of RMS and Hudgins feature set demonstrate the best average classification accuracy for all ten fingers developments. The classification process implemented in this studies is using Support Vector Machine (SVM) technique.

scholarly journals Feature Extraction and Classification of Citrus Juice by Using an Enhanced L-KSVD on Data Obtained from Electronic Nose

Sensors ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 916 ◽  
Author(s):  
Wen Cao ◽  
Chunmei Liu ◽  
Pengfei Jia
Keyword(s):  
Feature Extraction ◽  
Kernel Function ◽  
Electronic Nose ◽  
Classification Accuracy ◽  
Extraction Methods ◽  
Object Function ◽  
Optimal Value ◽  
Processed Products

Aroma plays a significant role in the quality of citrus fruits and processed products. The detection and analysis of citrus volatiles can be measured by an electronic nose (E-nose); in this paper, an E-nose is employed to classify the juice which is stored for different days. Feature extraction and classification are two important requirements for an E-nose. During the training process, a classifier can optimize its own parameters to achieve a better classification accuracy but cannot decide its input data which is treated by feature extraction methods, so the classification result is not always ideal. Label consistent KSVD (L-KSVD) is a novel technique which can extract the feature and classify the data at the same time, and such an operation can improve the classification accuracy. We propose an enhanced L-KSVD called E-LCKSVD for E-nose in this paper. During E-LCKSVD, we introduce a kernel function to the traditional L-KSVD and present a new initialization technique of its dictionary; finally, the weighted coefficients of different parts of its object function is studied, and enhanced quantum-behaved particle swarm optimization (EQPSO) is employed to optimize these coefficients. During the experimental section, we firstly find the classification accuracy of KSVD, and L-KSVD is improved with the help of the kernel function; this can prove that their ability of dealing nonlinear data is improved. Then, we compare the results of different dictionary initialization techniques and prove our proposed method is better. Finally, we find the optimal value of the weighted coefficients of the object function of E-LCKSVD that can make E-nose reach a better performance.

A Structural Analysis Based Feature Extraction Method for OCR System For Myanmar Printed Document Images

2012 ◽  
Vol 2 (1) ◽  
pp. 16-41 ◽  
Author(s):  
Htwe Pa Pa Win ◽  
Phyo Thu Thu Khine ◽  
Khin Nwe Ni Tun
Keyword(s):  
Feature Extraction ◽  
Structural Analysis ◽  
Character Recognition ◽  
Optical Character Recognition ◽  
Extraction Method ◽  
Recognition Performance ◽  
Extraction Methods ◽  
Support Vector ◽  
Svm Classifier ◽  
Feature Extraction Method

This paper proposes a new feature extraction method for off-line recognition of Myanmar printed documents. One of the most important factors to achieve high recognition performance in Optical Character Recognition (OCR) system is the selection of the feature extraction methods. Different types of existing OCR systems used various feature extraction methods because of the diversity of the scripts’ natures. One major contribution of the work in this paper is the design of logically rigorous coding based features. To show the effectiveness of the proposed method, this paper assumed the documents are successfully segmented into characters and extracted features from these isolated Myanmar characters. These features are extracted using structural analysis of the Myanmar scripts. The experimental results have been carried out using the Support Vector Machine (SVM) classifier and compare the pervious proposed feature extraction method.

Design of Text Categorization System Based on SVM

2012 ◽  
Vol 532-533 ◽  
pp. 1191-1195 ◽  
Author(s):  
Zhen Yan Liu ◽  
Wei Ping Wang ◽  
Yong Wang
Keyword(s):  
Feature Extraction ◽  
Feature Selection ◽  
Text Categorization ◽  
Feature Selection Method ◽  
Extraction Methods ◽  
Support Vector ◽  
Text Representation ◽  
Text Feature ◽  
Categorization System ◽  
Classifier Training

This paper introduces the design of a text categorization system based on Support Vector Machine (SVM). It analyzes the high dimensional characteristic of text data, the reason why SVM is suitable for text categorization. According to system data flow this system is constructed. This system consists of three subsystems which are text representation, classifier training and text classification. The core of this system is the classifier training, but text representation directly influences the currency of classifier and the performance of the system. Text feature vector space can be built by different kinds of feature selection and feature extraction methods. No research can indicate which one is the best method, so many feature selection and feature extraction methods are all developed in this system. For a specific classification task every feature selection method and every feature extraction method will be tested, and then a set of the best methods will be adopted.

A new combined transient extraction method coupled with WO3 gas sensors for polluting gases classification

Sensor Review ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Rabeb Faleh ◽  
Sami Gomri ◽  
Khalifa Aguir ◽  
Abdennaceur Kachouri
Keyword(s):  
Feature Extraction ◽  
Gas Sensors ◽  
Classification Accuracy ◽  
Extraction Method ◽  
Support Vector ◽  
Classification Rate ◽  
Content Type ◽  
Feature Extraction Method ◽  
Combined Features ◽  
Discrimination Capacity

Purpose The purpose of this paper is to deal with the classification improvement of pollutant using WO3 gases sensors. To evaluate the discrimination capacity, some experiments were achieved using three gases: ozone, ethanol, acetone and a mixture of ozone and ethanol via four WO3 sensors. Design/methodology/approach To improve the classification accuracy and enhance selectivity, some combined features that were configured through the principal component analysis were used. First, evaluate the discrimination capacity; some experiments were performed using three gases: ozone, ethanol, acetone and a mixture of ozone and ethanol, via four WO3 sensors. To this end, three features that are derivate, integral and the time corresponding to the peak derivate have been extracted from each transient sensor response according to four WO3 gas sensors used. Then these extracted parameters were used in a combined array. Findings The results show that the proposed feature extraction method could extract robust information. The Extreme Learning Machine (ELM) was used to identify the studied gases. In addition, ELM was compared with the Support Vector Machine (SVM). The experimental results prove the superiority of the combined features method in our E-nose application, as this method achieves the highest classification rate of 90% using the ELM and 93.03% using the SVM based on Radial Basis Kernel Function SVM-RBF. Originality/value Combined features have been configured from transient response to improve the classification accuracy. The achieved results show that the proposed feature extraction method could extract robust information. The ELM and SVM were used to identify the studied gases.

Headnote Prediction Using Machine Learning

2021 ◽  
Vol 18 (5) ◽  
Author(s):  
Sarmad Mahar ◽  
Sahar Zafar ◽  
Kamran Nishat
Keyword(s):  
Machine Learning ◽  
Feature Extraction ◽  
Active Learning ◽  
Text Classification ◽  
Extraction Methods ◽  
Text Summarization ◽  
Training Data ◽  
Second Step ◽  
Support Vector ◽  
Classification Algorithms

Headnotes are the precise explanation and summary of legal points in an issued judgment. Law journals hire experienced lawyers to write these headnotes. These headnotes help the reader quickly determine the issue discussed in the case. Headnotes comprise two parts. The first part comprises the topic discussed in the judgment, and the second part contains a summary of that judgment. In this thesis, we design, develop and evaluate headnote prediction using machine learning, without involving human involvement. We divided this task into a two steps process. In the first step, we predict law points used in the judgment by using text classification algorithms. The second step generates a summary of the judgment using text summarization techniques. To achieve this task, we created a Databank by extracting data from different law sources in Pakistan. We labelled training data generated based on Pakistan law websites. We tested different feature extraction methods on judiciary data to improve our system. Using these feature extraction methods, we developed a dictionary of terminology for ease of reference and utility. Our approach achieves 65% accuracy by using Linear Support Vector Classification with tri-gram and without stemmer. Using active learning our system can continuously improve the accuracy with the increased labelled examples provided by the users of the system.

scholarly journals Superpixel-Based Minimum Noise Fraction Feature Extraction for Classification of Hyperspectral Images

2020 ◽  
Vol 37 (5) ◽  
pp. 812-822
Author(s):  
Behnam Asghari Beirami ◽  
Mehdi Mokhtarzade
Keyword(s):  
Feature Extraction ◽  
Extraction Methods ◽  
Hyperspectral Images ◽  
Support Vector ◽  
Minimum Noise Fraction ◽  
Vector Machines ◽  
Noise Covariance ◽  
Noise Fraction ◽  
Minimum Noise

In this paper, a novel feature extraction technique called SuperMNF is proposed, which is an extension of the minimum noise fraction (MNF) transformation. In SuperMNF, each superpixel has its own transformation matrix and MNF transformation is performed on each superpixel individually. The basic idea behind the SuperMNF is that each superpixel contains its specific signal and noise covariance matrices which are different from the adjacent superpixels. The extracted features, owning spatial-spectral content and provided in the lower dimension, are classified by maximum likelihood classifier and support vector machines. Experiments that are conducted on two real hyperspectral images, named Indian Pines and Pavia University, demonstrate the efficiency of SuperMNF since it yielded more promising results than some other feature extraction methods (MNF, PCA, SuperPCA, KPCA, and MMP).

Feature Extraction and Classification of Images Based on Corner Invariant Moments

2013 ◽  
Vol 475-476 ◽  
pp. 374-378
Author(s):  
Xue Ming Zhai ◽  
Dong Ya Zhang ◽  
Yu Jia Zhai ◽  
Ruo Chen Li ◽  
De Wen Wang
Keyword(s):  
Feature Extraction ◽  
Classification Accuracy ◽  
Image Feature ◽  
Support Vector ◽  
System Management ◽  
Image Feature Extraction ◽  
Invariant Moments ◽  
Harris Corner ◽  
Classification Of Images

Image feature extraction and classification is increasingly important in all sectors of the images system management. Aiming at the problems that applying Hu invariant moments to extract image feature computes large and too dimensions, this paper presented Harris corner invariant moments algorithm. This algorithm only calculates corner coordinates, so can reduce the corner matching dimensions. Combined with the SVM (Support Vector Machine) classification method, we conducted a classification for a large number of images, and the result shows that using this algorithm to extract invariant moments and classifying can achieve better classification accuracy.

scholarly journals The CSP-Based New Features Plus Non-Convex Log Sparse Feature Selection for Motor Imagery EEG Classification

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4749
Author(s):  
Shaorong Zhang ◽  
Zhibin Zhu ◽  
Benxin Zhang ◽  
Bao Feng ◽  
Tianyou Yu ◽  
...  
Keyword(s):  
Feature Extraction ◽  
Feature Selection ◽  
Motor Imagery ◽  
Classification Accuracy ◽  
Feature Selection Method ◽  
Extraction Methods ◽  
Extraction Time ◽  
Classification Model ◽  
Discrete Wavelet ◽  
New Feature

The common spatial pattern (CSP) is a very effective feature extraction method in motor imagery based brain computer interface (BCI), but its performance depends on the selection of the optimal frequency band. Although a lot of research works have been proposed to improve CSP, most of these works have the problems of large computation costs and long feature extraction time. To this end, three new feature extraction methods based on CSP and a new feature selection method based on non-convex log regularization are proposed in this paper. Firstly, EEG signals are spatially filtered by CSP, and then three new feature extraction methods are proposed. We called them CSP-wavelet, CSP-WPD and CSP-FB, respectively. For CSP-Wavelet and CSP-WPD, the discrete wavelet transform (DWT) or wavelet packet decomposition (WPD) is used to decompose the spatially filtered signals, and then the energy and standard deviation of the wavelet coefficients are extracted as features. For CSP-FB, the spatially filtered signals are filtered into multiple bands by a filter bank (FB), and then the logarithm of variances of each band are extracted as features. Secondly, a sparse optimization method regularized with a non-convex log function is proposed for the feature selection, which we called LOG, and an optimization algorithm for LOG is given. Finally, ensemble learning is used for secondary feature selection and classification model construction. Combing feature extraction and feature selection methods, a total of three new EEG decoding methods are obtained, namely CSP-Wavelet+LOG, CSP-WPD+LOG, and CSP-FB+LOG. Four public motor imagery datasets are used to verify the performance of the proposed methods. Compared to existing methods, the proposed methods achieved the highest average classification accuracy of 88.86, 83.40, 81.53, and 80.83 in datasets 1–4, respectively. The feature extraction time of CSP-FB is the shortest. The experimental results show that the proposed methods can effectively improve the classification accuracy and reduce the feature extraction time. With comprehensive consideration of classification accuracy and feature extraction time, CSP-FB+LOG has the best performance and can be used for the real-time BCI system.

Sign in / Sign up

Export Citation Format

Share Document