scholarly journals New HFC/HFO Blends as Refrigerants for the Vapor-Compression Refrigeration System (VCRS)

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 946
Author(s):  
Bartosz Gil ◽  
Anna Szczepanowska ◽  
Sabina Rosiek
Keyword(s):  
Global Warming ◽  
Global Warming Potential ◽  
Mass Fraction ◽  
Vapor Compression ◽  
Refrigeration System ◽  
Operational Parameters ◽  
Vapor Compression Refrigeration ◽  
Low Global Warming Potential ◽  
Triangular Design

In this work, which is related to the current European Parliament Regulation on restrictions affecting refrigeration, four new three-component refrigerants have been proposed; all were created using low Global Warming Potential(GWP) synthetic and natural refrigerants. The considered mixtures consisted of R32, R41, R161, R152a, R1234ze (E), R1234yf, R1243zf, and RE170. These mixtures were theoretically tested with a 10% step in mass fraction using a triangular design. The analysis covered two theoretical cooling cycles at evaporating temperatures of 0 and −30 °C, and a 30 °C constant condensing temperature. The final stage of the work was the determination of the best mixture compositions by thermodynamic and operational parameters. R1234yf–R152a–RE170 with a weight share of 0.1/0.5/0.4 was determined to be the optimal mixture for potentially replacing the existing refrigerants.

scholarly journals Energy Analysis of Vapor Compression Refrigeration Cycle Using a New Generation Refrigerants with Low Global Warming Potential

2021 ◽  
Vol 87 (2) ◽  
pp. 106-117
Author(s):  
Rabah Touaibi ◽  
Hasan Koten
Keyword(s):  
Global Warming ◽  
Global Warming Potential ◽  
Energy Analysis ◽  
Coefficient Of Performance ◽  
Cycle Performance ◽  
Refrigeration Cycle ◽  
Vapor Compression ◽  
Vapor Compression Refrigeration Cycle ◽  
Vapor Compression Refrigeration ◽  
Low Global Warming Potential

An energy analysis study carried out on a vapor compression refrigeration cycle using refrigerants with low global warming potential (GWP) of the Hydro-Fluoro-Olefin (HFO) type, in particular R1234yf and R1234ze fluids to replace HFC refrigerants . Computer code was developed using software for solving engineering equations to calculate performance parameters; for this, three HFC type fluids (R134a, R404A and R410A) were selected for a comparative study. The results showed that R1234ze is the best refrigerant among those selected for the mechanical vapor compression refrigeration cycle. The thermodynamic analysis showed the effect of the evaporator temperature (-22 °C to 10 °C) and the condenser temperature (30 °C to 50 °C) on the steam cycle performance. Compression refrigeration, including the coefficient of performance. The results showed that the HFO-R1234ze with low GWP gives the best coefficient of performance of 3.14 close to that of the R134a fluid (3.17). In addition, R1234ze is considered an alternative fluid to R134a for their ecological properties.

scholarly journals Cycle performance evaluation of various R134a/hydrocarbon blend refrigerants applied in vapor-compression heat pumps

2019 ◽  
Vol 11 (1) ◽  
pp. 168781401881956 ◽  
Author(s):  
Liu Zhang ◽  
Jin-xiu Zhao ◽  
Li-fang Yue ◽  
Hong-xing Zhou ◽  
Chun-li Ren
Keyword(s):  
Global Warming ◽  
Heat Pump ◽  
Global Warming Potential ◽  
Mass Fraction ◽  
Heat Pumps ◽  
Cycle Performance ◽  
Hydrocarbon Fraction ◽  
Vapor Compression ◽  
Low Global Warming Potential ◽  
Cycle Efficiency

Blend refrigerants combing hydrofluorocarbons and hydrocarbons are good substitutes to decrease the flammability of hydrocarbons while reducing the global warming potential of hydrofluorocarbons. Four hydrofluorocarbon/hydrocarbon blends (R134a/R290, R134a/R600, R134a/R600a, and R134a/R1270) with various compositions are investigated in vapor-compression heat pump cycles. The effects of hydrocarbon fraction on the blend properties, including critical temperature, critical pressure, latent heat, saturated liquid line, and azeotropic behavior, are comparatively analyzed. Thermodynamic models are established for heat pump simulation. For each R134a/hydrocarbon blend, both the cooling and heating coefficient of performances generally first decrease and then increase with the hydrocarbon mass fraction. The coefficient of performances of R134a/R600 and R134a/R600a have dramatic changes within the hydrocarbon mass fraction of 0.2–1.0, while those of R134a/R290 and R134a/R1270 have dramatic changes within the fraction of 0.0–0.4. Lower condensing or higher evaporating temperatures lead to higher coefficient of performances. In addition, the volumetric capacities first increase and then decrease with the increase of hydrocarbon fraction. R134a/R290 and R134a/R1270 show much higher volumetric capacities as compared to R134a/R600 and R134a/R600a under higher hydrocarbon fractions, which can greatly reduce the required compressor size of pure R134a. The discharge temperatures are kept in the range of 43.0°C–72.3°C for all the blends. To obtain low global warming potential R134a/hydrocarbon blends, the hydrocarbon fraction need to be greater than 0.9, at which R134a/R1270 performs the best, with cooling/heating coefficient of performances of 5.25/4.70 and cooling/heating volumetric capacities of 4.78/3.53 MJ/m3. Generally, R134a/R290 and R134a/R1270 perform much better than R134a/R600 and R134a/R600a at the low global warming potential composition. This study can contribute to the determination of hydrofluorocarbon/hydrocarbon compositions based on comprehensive considerations of cycle efficiency, volumetric capacity, and low global warming potential target.

Influence of Silicon Carbide Nanopowder in R134a Refrigerant Used in Vapor Compression Refrigeration System

2017 ◽  
Vol 25 (01) ◽  
pp. 1750007 ◽  
Author(s):  
D. Senthilkumar
Keyword(s):  
Silicon Carbide ◽  
Energy Consumption ◽  
Mass Fraction ◽  
Vapor Compression ◽  
Refrigeration System ◽  
Performance Study ◽  
Sic Nanoparticles ◽  
Vapor Compression Refrigeration

This paper deals with the influence of silicon carbide (SiC) nanopowder in R134 a refrigerant used in a vapor compression refrigeration system. The performance study was done by mixing a SiC nanopowder in R134a refrigerant. The energy consumption of the R134a refrigerant with SiC nanoparticles mixture saves 20% energy with 0.25% mass fraction of SiC nanoparticles when compared to the R134a system. The COP of the refrigerant R134a system is 1.24 whereas COP for R134a-SiC nanopowder is 1.81. The SiC nanopowder is cryogenically treated at [Formula: see text]C for 24 h and the COP is found out. The results show that the COP of R134a-SiC nanopowder and R134a-cryo SiC (cryogenically treated silicon carbide nanopowder) is increased when compared to the R134a conventional refrigeration system.

Sign in / Sign up

Export Citation Format

Share Document