scholarly journals Optimization for Liquid-Liquid Extraction of Cd(II) over Cu(II) Ions from Aqueous Solutions Using Ionic Liquid Aliquat 336 with Tributyl Phosphate

2020 ◽  
Vol 21 (18) ◽  
pp. 6860
Author(s):  
Lai Yee Lee ◽  
Norhashimah Morad ◽  
Norli Ismail ◽  
Amir Talebi ◽  
Mohd Rafatullah
Keyword(s):  
Tributyl Phosphate ◽  
Ethylenediaminetetraacetic Acid ◽  
Selective Extraction ◽  
Liquid Extraction ◽  
Antagonistic Effect ◽  
Fractional Factorial ◽  
Aliquat 336 ◽  
Significance Level ◽  
Liquid Liquid Extraction ◽  
Edta Concentration

This study investigates the separation of two heavy metals, Cd(II) and Cu(II), from the mixed synthetic feed using a liquid-liquid extraction. The current study uses tri-octyl methylammonium chloride (Aliquat 336) as the extractant (with tributyl phosphate (TBP) as a phase modifier), diluted in toluene, in order to investigate the selective extraction of Cd(II) over Cu(II) ions. We investigate the use of ethylenediaminetetraacetic acid (EDTA) as a masking agent for Cu(II), when added in aqueous feed, for the selective extraction of Cd(II). Five factors that influence the selective extraction of Cd(II) over Cu(II) (the equilibrium pH (pHeq), Aliquat 336 concentration (Aliquat 336), TBP concentration (TBP), EDTA concentration (EDTA), and organic to aqueous ratio (O:A)) were analyzed. Results from a 25–1 fractional factorial design show that Aliquat 336 significantly influenced Cd(II) extraction, whereas EDTA was statistically significant for the antagonistic effect on the E% of Cu(II) in the same system. Moreover, results from optimization experiment showed that the optimum conditions are Aliquat 336 concentration of 99.64 mM and EDTA concentration of 48.86 mM—where 95.89% of Cd(II) was extracted with the least extracted Cu(II) of 0.59%. A second-order model was fitted for optimization of Cd(II) extraction with a R2 value of 0.998, and ANOVA results revealed that the model adequately fitted the data at a 5% significance level. Interaction between Aliquat 336 and Cd(II) has been proven via FTIR qualitative analysis, whereas the addition of TBP does not affect the extraction mechanism.

scholarly journals Tantalum and Niobium Selective Extraction by Alkyl-Acetophenone

Metals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 654 ◽  
Author(s):  
Moussa Toure ◽  
Guilhem Arrachart ◽  
Jean Duhamet ◽  
Stephane Pellet-Rostaing
Keyword(s):  
Extraction Efficiency ◽  
Methyl Isobutyl Ketone ◽  
Selective Extraction ◽  
Extraction Process ◽  
Liquid Extraction ◽  
Methyl Isobutyl ◽  
Isobutyl Ketone ◽  
Waste Solution ◽  
Liquid Liquid Extraction ◽  
D Values

A study has been carried out on Ta and Nb recovery by a liquid-liquid extraction process using 4-methylacetophenone (4-MAcPh) as the organic phase. The 4-MAcPh was compared to methyl isobutyl ketone (MIBK) with respect to extraction efficiencies (D values) at different concentrations of H2SO4 in the aqueous phase. The results showed a similar extraction of Nb for both solvents. However, for Ta, extraction efficiency is increased by a factor of 1.3 for 4-MAcPh. In addition, the MIBK solubilized completely after 6 mol∙L−1 of H2SO4 against only a loss of 0.14–4% for 4-MAcPh between 6 and 9 mol∙L−1 of H2SO4. The potential of 4-MAcPh has also been studied to selectively recover Ta from a model capacitor waste solution. The results showed a selectivity for Ta in the presence of impurities such as Ag, Fe, Ni and Mn. The 4-MAcPh also presents the advantage of having physicochemical properties adapted to its use in liquid-liquid extraction technologies such as mixer-settlers.

Quaternary ammonium based task specific ionic liquid for the efficient and selective extraction of neptunium

2017 ◽  
Vol 105 (9) ◽  
Author(s):  
Nishesh Kumar Gupta ◽  
Arijit Sengupta ◽  
Sujoy Biswas
Keyword(s):  
Ionic Liquid ◽  
Cation Exchange ◽  
Quaternary Ammonium ◽  
Acidic Solution ◽  
Selective Extraction ◽  
Liquid Extraction ◽  
Exchange Mechanism ◽  
Liquid Liquid Extraction ◽  
Aqueous Acidic Solution ◽  
Task Specific Ionic Liquid

Abstract:Liquid–liquid extraction of neptunium from aqueous acidic solution using quaternary ammonium based task specific ionic liquid (TSIL) was investigated. The extraction of Np was predominated by the ‘cation exchange’ mechanism via [NpO

scholarly journals Tantalum and Niobium Selective Extraction by Alkyl-Acetophenone

2018 ◽  
Author(s):  
Moussa Toure ◽  
Guilhem Arrachart ◽  
Jean Duhamet ◽  
Stephane Pellet-Rostaing
Keyword(s):  
Physicochemical Properties ◽  
Aqueous Phase ◽  
Organic Phase ◽  
Extraction Efficiency ◽  
Selective Extraction ◽  
Extraction Process ◽  
Liquid Extraction ◽  
Waste Solution ◽  
Liquid Liquid Extraction ◽  
Kd Values

A study has been carried out on Ta and Nb recovery by liquid-liquid extraction process using 4-methylacetophenone (4-MAcPh) as organic phase. The 4-MAcPh was compared to methylisobutylketone (MIBK) with respect to extraction efficiencies (kD values) at different concentrations of H2SO4 in the aqueous phase. The results showed a similar extraction of Nb for both solvents. However, for Ta extraction efficiency is increased by a factor of 1.3 for 4-MAcPh. In addition, the MIBK solubilized completely after 6 mol L-1 of H2SO4 against only a loss of 0.14 to 4% for 4-MAcPh between 6 and 9 mol L-1 of H2SO4. The potential of 4-MAcPh has also been studied to selectively recover Ta from a model capacitor waste solution. The results showed a selectivity for Ta in the presence of impurities such as Fe, Ni, Mn. The 4-MAcPh also presents the advantage of having physicochemical properties adapted to its use in liquid-liquid extraction technologies such as mixer-settlers.

Sign in / Sign up

Export Citation Format

Share Document