Influence of lead acetate on seed germination and growth of young alfalfa plants

This study presents the results of testing the effect of different concentrations of lead-acetate on seed germination and young Seedlings of alfalfa. Тhe experiment was organized so that in the first variant, only lead-acetate of different concentrations (10-5, 10-4, 10-3, 10-2 and 2 x 10-2 M) was used, and in the second, next to the lead acetate EDTA concentration of 0.012 % was added. The results of this study in which natural conditions are imitated showed that the percentage of alfalfa seed germination decreases with increasing lead-acetate concentrations. In a medium of high concentration of lead acetate 10-2 and 2 x 10-2, a small number of seeds (39% and 32 (32%) germinated. In the same treatments with EDTA, the toxic effects of lead acetate were reduced, and seed germination was better (59% and 43% seeds germinated). It has been noticed that lead has toxic effects on the growth of alfalfa roots and stems. In the variant in which EDTA was used, the negative influence of lead on and growth of alfalfa seedlings was significantly mitigated.

Influence of lead acetate on seed germination and growth of young alfalfa plants

This study presents the results of testing the effect of different concentrations of lead-acetate on seed germination and young Seedlings of alfalfa. Тhe experiment was organized so that in the first variant, only lead-acetate of different concentrations (10-5, 10-4, 10-3, 10-2 and 2 x 10-2 M) was used, and in the second, next to the lead acetate EDTA concentration of 0.012 % was added. The results of this study in which natural conditions are imitated showed that the percentage of alfalfa seed germination decreases with increasing lead-acetate concentrations. In a medium of high concentration of lead acetate 10-2 and 2 x 10-2, a small number of seeds (39% and 32 (32%) germinated. In the same treatments with EDTA, the toxic effects of lead acetate were reduced, and seed germination was better (59% and 43% seeds germinated). It has been noticed that lead has toxic effects on the growth of alfalfa roots and stems. In the variant in which EDTA was used, the negative influence of lead on and growth of alfalfa seedlings was significantly mitigated.

Investigation of EDTA concentration on the size of carbonated flowerlike hydroxyapatite microspheres

Ethylenediamine tetraacetic acid (EDTA) is considered an effective crystal growth modifier for template-assisted hydrothermal synthesis of hydroxyapatite (HA) materials. In this work, flowerlike-carbonated HA (CHA) microspheres were synthesized using EDTA via a one-step hydrothermal route. The phase, functional groups, morphology and particle size distribution of the products were examined by X-ray diffraction, Fourier transform infrared spectrometer, field emission scanning electron microscopy as well as laser diffraction particle size analysis. Results show that the morphology of the products can be well controlled by adjusting the EDTA concentration. With an increase of the EDTA concentration, the particle size of flowerlike microspheres decreased from tens of microns down to a few microns. The underlying mechanism for the morphological transition of CHA microspheres with different concentrations of EDTA under hydrothermal conditions is proposed. This work provides a simple way to controllably fabricate CHA microspheres with various sizes using the same synthesis system for biomedical applications, such as cell carriers and drug delivery.

Optimization for Liquid-Liquid Extraction of Cd(II) over Cu(II) Ions from Aqueous Solutions Using Ionic Liquid Aliquat 336 with Tributyl Phosphate

This study investigates the separation of two heavy metals, Cd(II) and Cu(II), from the mixed synthetic feed using a liquid-liquid extraction. The current study uses tri-octyl methylammonium chloride (Aliquat 336) as the extractant (with tributyl phosphate (TBP) as a phase modifier), diluted in toluene, in order to investigate the selective extraction of Cd(II) over Cu(II) ions. We investigate the use of ethylenediaminetetraacetic acid (EDTA) as a masking agent for Cu(II), when added in aqueous feed, for the selective extraction of Cd(II). Five factors that influence the selective extraction of Cd(II) over Cu(II) (the equilibrium pH (pHeq), Aliquat 336 concentration (Aliquat 336), TBP concentration (TBP), EDTA concentration (EDTA), and organic to aqueous ratio (O:A)) were analyzed. Results from a 25–1 fractional factorial design show that Aliquat 336 significantly influenced Cd(II) extraction, whereas EDTA was statistically significant for the antagonistic effect on the E% of Cu(II) in the same system. Moreover, results from optimization experiment showed that the optimum conditions are Aliquat 336 concentration of 99.64 mM and EDTA concentration of 48.86 mM—where 95.89% of Cd(II) was extracted with the least extracted Cu(II) of 0.59%. A second-order model was fitted for optimization of Cd(II) extraction with a R2 value of 0.998, and ANOVA results revealed that the model adequately fitted the data at a 5% significance level. Interaction between Aliquat 336 and Cd(II) has been proven via FTIR qualitative analysis, whereas the addition of TBP does not affect the extraction mechanism.

kEDTA Sample Contamination: A Reappraisal

Background Potassium EDTA (kEDTA) contamination of serum samples is common, causing spurious hyperkalemia, hypozincemia, and hypocalcemia that if unrecognized may adversely affect patient care. Gross kEDTA contamination is easy to detect, but identification of spurious electrolytes due to small amounts of contamination requires measurement of serum EDTA. We validated an EDTA assay on the Abbott Architect and reassessed its value in identifying kEDTA contamination and in studying mechanisms for contamination. Methods Within- and between-batch imprecision, linearity, recovery, interference, and carryover were assessed. Serum supplemented with k2EDTA plasma, to mimic sample contamination, was used to study its effect on potassium, calcium, zinc, magnesium, and alkaline phosphatase. Our current laboratory protocol for identification of kEDTA contamination, based on measurement of serum calcium, was compared to that of EDTA measurement. Results The EDTA assay displayed acceptable performance characteristics. Hemoglobin was a positive interferent. EDTA was detectable in serum contaminated with 1% (v:v) k2EDTA plasma. An increase in serum potassium of 0.54 mmol/L (11.9%) was observed at a measured EDTA concentration of 0.19 mmol/L, equivalent to 3.2% (v:v) contamination. At this EDTA concentration reductions were also observed in zinc (71%), calcium (1%), alkaline phosphatase (ALP) (4%), and magnesium (2.4%). The serum EDTA assay detected contamination in 31/106 patient samples with hyperkalemia (potassium ≥6.0mmol/L), 20 of which were undetected by the current laboratory protocol. Conclusions The EDTA assay displayed acceptable performance, with the ability to reliably measure EDTA at low concentrations. Only a small amount of kEDTA causes significant spurious hyperkalemia and is only reliably detected with EDTA measurement.

Chemical Cleaning of Fouled Polyethersulphone Nanofiltration Membranes with Ethylenediaminetetraacetic Acid

This study mainly investigated the potential use of ethylenediaminetetraacetic acid (EDTA) as the chemical cleaning agent to restore the permeate flux of organically fouled polyethersulfone (PES) nanofiltration (NF) membranes under varying applied pressures. The cleaning efficiency was quantified based on flux recovery rate. The results showed that the optimum EDTA concentration is 1.0 wt%, within the range investigated, which proved that higher concentration does not necessary enhance the cleaning efficiency. The results also demonstrated that the highest flux recovery was achieved at the applied pressure of 14 bar regardless of EDTA concentration. Overall, the maximum flux recovery that could be achieved is only 35.03%, implying EDTA is not very effective in removing foulants from the PES NF membranes.

OPTIMIZATION OF EDTA ENHANCED SOIL WASHING ON MULTIPLE HEAVY METALS REMOVAL USING RESPONSE SURFACE METHODOLOGY

This research presents the optimization of soil washing conditions in the removal of multiple heavy metals (Cu-Pb-Zn-Cd) under the using of ethylenediaminetetraacetic acid (EDTA). The optimum combination of washing parameters in a bench-scale soil washing experiments is determined by response surface methodology (RSM). Central composite design is applied after single factor experiment, EDTA concentration, solid-to-liquid ratio and washing time are evaluated variables for the removal processes, and the regression models of HMs are constructed. The results show that, EDTA concentration and solid-to-liquid ratio are significant factors for this process. Subsequently, 50% of Cu removal was set as the optimum target to optimize the combined conditions, through the building of multiple quadratic regression models, the optimal condition combination is determined that EDTA concentration is 0.0026 mol·L-1, solid-to-liquid ratio is 1:22, washing time is 3.89 h, the extraction rate of Pb, Zn, Cd is predicted to be 78%, 75% and 71%, respectively.

Corrosion Behavior of SA508 Coupled with and without Magnetite in EDTA-Based Solutions

The effects of magnetite on the corrosion behavior of SA508 were studied in 10% and 20% EDTA-based chemical cleaning solutions at 93 °C and 121 °C using electrochemical and immersion tests. SA508 was the anode of the galvanic pair between SA508 and magnetite. The galvanic coupling shifted the mixed corrosion potential of SA508 in the positive direction and thus increased its corrosion rate. The increase of the EDTA concentration and solution temperature led to an increase in the extent of the galvanic effect.

Excess EDTA interferes with cortisol measurement using a solid-phase, chemiluminescent enzyme immunoassay

Hormone assays that use a solid-phase, automated, chemiluminescent enzyme immunoassay (CEIA) with an alkaline phosphatase–tagged hormone or antibody as a reporter are performed on serum or EDTA plasma in our laboratory. CEIA cortisol results appeared to increase in the presence of excess EDTA. We investigated the effect of the addition of different amounts of EDTA on cortisol concentrations in pooled canine serum samples. The recommended EDTA plasma concentration of 4.1 mmol/L (1.8 mg/mL) did not alter cortisol concentrations when added to serum pools; however, the addition of ≥5.1 mmol/L (2.25 mg/mL) of EDTA increased apparent concentrations of cortisol. Supplementation of serum samples with MgCl2 to 5 mmol/L reversed the effect of EDTA up to a concentration of ~8.1 mmol/L (3.6 mg/mL). Our findings show that CEIA cortisol results on EDTA plasma can be artificially increased if the EDTA concentration exceeds 5.1 mmol/L.