scholarly journals An Autonomous Low-Power LoRa-Based Flood-Monitoring System

2020 ◽  
Vol 10 (2) ◽  
pp. 15 ◽  
Author(s):  
Mattia Ragnoli ◽  
Gianluca Barile ◽  
Alfiero Leoni ◽  
Giuseppe Ferri ◽  
Vincenzo Stornelli

The development of Internet of Things (IoT) systems is a rapidly evolving scenario, thanks also to newly available low-power wide area network (LPWAN) technologies that are utilized for environmental monitoring purposes and to prevent potentially dangerous situations with smaller and less expensive physical structures. This paper presents the design, implementation and test results of a flood-monitoring system based on LoRa technology, tested in a real-world scenario. The entire system is designed in a modular perspective, in order to have the capability to interface different types of sensors without the need for making significant hardware changes to the proposed node architecture. The information is stored through a device equipped with sensors and a microcontroller, connected to a LoRa wireless module for sending data, which are then processed and stored through a web structure where the alarm function is implemented in case of flooding.

2019 ◽  
Vol 6 (1) ◽  
pp. 590-598 ◽  
Author(s):  
Xihai Zhang ◽  
Mingming Zhang ◽  
Fanfeng Meng ◽  
Yue Qiao ◽  
Suijia Xu ◽  
...  

2021 ◽  
Author(s):  
Aulia Dharma Putra ◽  
Hikaru Toda ◽  
Achmad Hafidz ◽  
Kouji Matsuba ◽  
Yuuichi Kimikado ◽  
...  

Abstract A simple monitoring method for observing slope movement and deformation can be performed with tilt sensors. A more efficient monitoring method, using a type of wireless communication called LPWA (Low Power Wide Area) network technology, has also recently become available. In the present study, a monitoring system was developed that combines tilt sensors and LPWA network technology for measuring the movement of slopes and sending the information through wireless communication. Firstly, radio wave propagation experiments were conducted to find the proper location for the gateway device of the monitoring system. Then, in March 2018, the developed system that consists of tilt and water-level sensors and the wireless communication of LPWA was installed at an observation site. Since the installation, the data from the tilt sensors have been successfully collected through LPWA, and a slope failure was unexpectedly observed at the observation site during the Heavy Rain Event of July 2018, which caused severe disasters, particularly from western Japan to the Tokai region. Using the data from the tilt sensors, the rainfall data, and the groundwater level, the slope failure was analysed. A site investigation was conducted, and the shear strength parameter was examined using back analysis method. In conclusion, the developed system using sensors and LPWA has continued to efficiently monitor the movement of the targeted slope, but the collection of additional data will be required to increase the reliability of the system.


2021 ◽  
Vol 21 (2) ◽  
pp. 1100-1107 ◽  
Author(s):  
Xihai Zhang ◽  
Yan Zhao ◽  
Lin Zhou ◽  
Jian Zhao ◽  
Wenbin Dong ◽  
...  

Author(s):  
Taghi Shahgholi ◽  
Amir Sheikhahmadi ◽  
Keyhan Khamforoosh ◽  
Sadoon Azizi

AbstractIncreased number of the vehicles on the streets around the world has led to several problems including traffic congestion, emissions, and huge fuel consumption in many regions. With advances in wireless and traffic technologies, the Intelligent Transportation System (ITS) has been introduced as a viable solution for solving these problems by implementing more efficient use of the current infrastructures. In this paper, the possibility of using cellular-based Low-Power Wide-Area Network (LPWAN) communications, LTE-M and NB-IoT, for ITS applications has been investigated. LTE-M and NB-IoT are designed to provide long range, low power and low cost communication infrastructures and can be a promising option which has the potential to be employed immediately in real systems. In this paper, we have proposed an architecture to employ the LPWAN as a backhaul infrastructure for ITS and to understand the feasibility of the proposed model, two applications with low and high delay requirements have been examined: road traffic monitoring and emergency vehicle management. Then, the performance of using LTE-M and NB-IoT for providing backhaul communication infrastructure has been evaluated in a realistic simulation environment and compared for these two scenarios in terms of end-to-end latency per user. Simulation of Urban MObility has been used for realistic traffic generation and a Python-based program has been developed for evaluation of the communication system. The simulation results demonstrate the feasibility of using LPWAN for ITS backhaul infrastructure mostly in favor of the LTE-M over NB-IoT.


Designs ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 17
Author(s):  
Nur-A-Alam ◽  
Mominul Ahsan ◽  
Md. Abdul Based ◽  
Julfikar Haider ◽  
Eduardo M. G. Rodrigues

In the era of Industry 4.0, remote monitoring and controlling appliance/equipment at home, institute, or industry from a long distance with low power consumption remains challenging. At present, some smart phones are being actively used to control appliances at home or institute using Internet of Things (IoT) systems. This paper presents a novel smart automation system using long range (LoRa) technology. The proposed LoRa based system consists of wireless communication system and different types of sensors, operated by a smart phone application and powered by a low-power battery, with an operating range of 3–12 km distance. The system established a connection between an android phone and a microprocessor (ESP32) through Wi-Fi at the sender end. The ESP32 module was connected to a LoRa module. At the receiver end, an ESP32 module and LoRa module without Wi-Fi was employed. Wide Area Network (WAN) communication protocol was used on the LoRa module to provide switching functionality of the targeted area. The performance of the system was evaluated by three real-life case studies through measuring environmental temperature and humidity, detecting fire, and controlling the switching functionality of appliances. Obtaining correct environmental data, fire detection with 90% accuracy, and switching functionality with 92.33% accuracy at a distance up to 12 km demonstrated the high performance of the system. The proposed smart system with modular design proved to be highly effective in controlling and monitoring home appliances from a longer distance with relatively lower power consumption.


2019 ◽  
Vol 11 (3) ◽  
pp. 57 ◽  
Author(s):  
Lorenzo Vangelista ◽  
Marco Centenaro

The low-power wide-area network (LPWAN) paradigm is gradually gaining market acceptance. In particular, three prominent LPWAN technologies are emerging at the moment: LoRaWAN™ and SigFox™, which operate on unlicensed frequency bands, and NB-IoT, operating on licensed frequency bands. This paper deals with LoRaWAN™, and has the aim of describing a particularly interesting feature provided by the latest LoRaWAN™ specification—often neglected in the literature—i.e., the roaming capability between different operators of LoRaWAN™ networks, across the same country or even different countries. Recalling that LoRaWAN™ devices do not have a subscriber identification module (SIM) like cellular network terminals, at a first glance the implementation of roaming in LoRaWAN™ networks could seem intricate. The contribution of this paper consists in explaining the principles behind the implementation of a global LoRaWAN network, with particular focus on how to cope with the lack of the SIM in the architecture and how to realize roaming.


Author(s):  
Paulo Renato Câmera da Silva ◽  
Herman Augusto Lepikson ◽  
Marcus Vinícius Ivo da Silva ◽  
Rafael Barbosa Mendes

Sign in / Sign up

Export Citation Format

Share Document