scholarly journals Corrosion Resistance to Chloride of a Novel Stainless Steel: The Threshold Chloride Value and Effect of Surface State

Materials ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2235
Author(s):  
Hailong Wang ◽  
Yuanjian Wu ◽  
Xiaoyan Sun ◽  
Jiayan Ling ◽  
Daoqin Zou
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Surface State ◽  
Steel Surface ◽  
Chloride Concentration ◽  
Surface Damage ◽  
Carbon Steels ◽  
The Novel ◽  
Rc Structures

To evaluate the corrosion resistance of a novel stainless steel intended for use within reinforced concrete (RC) structures exposed to aggressive environments, the threshold chloride concentration of three stainless steels (316, 2205, novel 2205) and two carbon steels (HRB400, HRB500) exposed to pore solutions of fresh concrete was experimentally studied by means of electrochemical methods. The effect of steel surface state on the corrosion resistance was also experimentally investigated. The results showed that the novel stainless steel has a much higher corrosion resistance than those of the carbon steels and stainless steels when subjected to chloride environments. The presence of surface damage leads to significant decrease of corrosion resistance for carbon steel, however the corrosion can be certainly inhibited with the accumulation of rust on the steel surface. Although the oxide layer was worn, the novel 2205 stainless steel still has a great corrosion resistance.

scholarly journals Duplex Stainless Steels—Alloys for the 21st Century

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 836
Author(s):  
Roger Francis ◽  
Glenn Byrne
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
21St Century ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Cost Benefit ◽  
Industrial Applications ◽  
Carbon Steels ◽  
Duplex Stainless Steels ◽  
Corrosion Resistant

Duplex stainless steels were first manufactured early in the 20th century, but it was the introduction in the 1970s of the argon-oxygen decarburisation (AOD) steel making process and the addition of nitrogen to these steels, that made the alloys stronger, more weldable and more corrosion resistant. Today, duplex stainless steels can be categorised into four main groups, i.e., “lean”, “standard”, “super”, and “hyper” duplex types. These groups cover a range of compositions and properties, but they all have in common a microstructure consisting of roughly equal proportions of austenite and ferrite, high strength, good toughness and good corrosion resistance, especially to stress corrosion cracking (SCC) compared with similar austenitic stainless steels. Moreover, the development of a duplex stainless-steel microstructure requires lower levels of nickel in the composition than for a corresponding austenitic stainless steel with comparable pitting and crevice corrosion resistance, hence they cost less. This makes duplex stainless steels a very versatile and attractive group of alloys both commercially and technically. There are applications where duplex grades can be used as lower cost through-life options, in preference to coated carbon steels, a range of other stainless steels, and in some cases nickel alloys. This cost benefit is further emphasised if the design engineer can use the higher strength of duplex grades to construct vessels and pipework of lower wall thickness than would be the case if an austenitic grade or nickel alloy was being used. Hence, we find duplex stainless steels are widely used in many industries. In this paper their use in three industrial applications is reviewed, namely marine, heat exchangers, and the chemical and process industries. The corrosion resistance in the relevant fluids is discussed and some case histories highlight both successes and potential problems with duplex alloys in these industries. The paper shows how duplex stainless steels can provide cost-effective solutions in corrosive environments, and why they will be a standard corrosion resistant alloy (CRA) for many industries through the 21st century.

AISI TYPE 303 and 303Se

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type

Abstract AISI Types 303 and 303 Se austenitic chromium nickel stainless steels to which elements have been added to improve machining and non-seizing characteristics. They are the most readily machinable of all the austenitic chromium nickel grades and are suitable for use in automatic screw machines. They are widely used to minimize seizing and galling. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-126. Producer or source: Stainless steel mills.

ALZ 316

Alloy Digest ◽  
1999 ◽  
Vol 48 (8) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating

Abstract ALZ 316 is an austenitic stainless steel with good formability, corrosion resistance, toughness, and mechanical properties. It is the basic grade of the stainless steels, containing 2 to 3% molybdenum. After the 304 series, the molybdenum-containing stainless steels are the most widely used austenitic stainless steels. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-756. Producer or source: ALZ nv.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 203

Alloy Digest ◽  
1997 ◽  
Vol 46 (8) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Stainless Steels ◽  
Heat Treating ◽  
High Manganese ◽  
Aisi Type ◽  
Alternative Materials

Abstract Project 70 and Project 7000 Type 203 stainless steels are alternative materials to AISI Type 303, resulfurized stainless steel having improved machinability. High manganese and copper are substituted for some nickel resulting in a stable austenitic structure having low magnetic permeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-505. Producer or source: Carpenter. Originally published May 1989, revised August 1997.

CLC 18.10LN

Alloy Digest ◽  
2006 ◽  
Vol 55 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Stainless Steels ◽  
The Other ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract CLC 18.10LN is an austenitic stainless steel with 18% Cr, 9.5% Ni, and 0.14% N to provide good corrosion resistance at strengths above the other low-carbon stainless steels. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-950. Producer or source: Industeel USA, LLC.

CARPENTER 7-Mo PLUS

Alloy Digest ◽  
1995 ◽  
Vol 44 (9) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Stainless Steels ◽  
Heat Exchangers ◽  
Heat Treating ◽  
Ferrite Matrix ◽  
Corrosion Pitting ◽  
Petrochemical Industries

Abstract CARPENTER 7-Mo PLUS is a duplex stainless steel of austenite in a ferrite matrix. It is superior to 300 series stainless steels like types 304 and 316 in strength, corrosion, pitting and stress-corrosion cracking resistance (to chlorides). Typical applications are heat exchangers in the chemical and petrochemical industries. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-608. Producer or source: Carpenter.

CRUCIBLE 174 SXR

Alloy Digest ◽  
2009 ◽  
Vol 58 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Stainless Steels ◽  
Precipitation Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Martensitic Stainless Steels ◽  
Excellent Corrosion Resistance

Abstract Crucible 174 SXR is a premium-quality precipitation-hardening stainless steel designed for use as rifle barrels. It is a modification of Crucible’s 17Cr-4Ni that offers substantially improved machinability without sacrificing toughness. Its excellent corrosion resistance approaches that of a 300 series austenitic stainless steel, while its high strength is characteristic of 400 series martensitic stainless steels. At similar hardness levels, Crucible 174 SXR offers greater toughness than either the 410 or 416 stainless steels which are commonly used for rifle barrels. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming and heat treating. Filing Code: SS-1034. Producer or source: Crucible Service Centers.

UNILOY 430

Alloy Digest ◽  
1982 ◽  
Vol 31 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Elevated Temperature ◽  
Stainless Steels ◽  
Heat Treating ◽  
Storage Tanks ◽  
Good Resistance ◽  
Temperature Performance ◽  
Temperature Scaling

Abstract UNILOY 430 is a medium-chromium (17%) non-hardening, ferritic stainless steel. Of the AISI 400 series stainless steels, Uniloy 430 most nearly resembles the 18% chromium-8% nickel stainless steels in fabrication and service. It has excellent resistance to corrosion and good resistance to elevated-temperature scaling. Its many uses include architectural trim, nitric acid storage tanks and kitchen appliances. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-408. Producer or source: Cyclops.

ALLOY 0Cr25Ni6Mo3CuN

Alloy Digest ◽  
1998 ◽  
Vol 47 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Temperature Performance ◽  
Steel Research ◽  
Oil Refinement

Abstract ALLOY 0Cr25Ni6Mo3CuN is one of four grades of duplex stainless steel that were developed and have found wide applications in China since 1980. In oil refinement and the petrochemical processing industries, they have substituted for austenitic stainless steels in many types of equipment, valves, and pump parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming and joining. Filing Code: SS-706. Producer or source: Central Iron & Steel Research Institute.

MAGIVAL MG2

Alloy Digest ◽  
2013 ◽  
Vol 62 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Coercive Force ◽  
Magnetic Permeability ◽  
Stainless Steels ◽  
Heat Treating ◽  
Steel Grade ◽  
High Permeability ◽  
Ferritic Stainless Steels ◽  
Magnetic Applications

Abstract MAGIVAL MG2 is a free machining ferritic stainless steel grade with the same high machinability and corrosion resistance as type 430F, but offering a higher magnetic permeability and lower coercive force than MG1 (Alloy Digest SS-1159, October 2013). Magival is a group of easily workable ferritic stainless steels developed for magnetic applications where high permeability and low coercive force are required. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1161. Producer or source: Valbruna Stainless Steel.

Sign in / Sign up

Export Citation Format

Share Document