scholarly journals Progressive Failure Analysis of Thin-Walled Composite Structures Verified Experimentally

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1138 ◽  
Author(s):  
Patryk Rozylo ◽  
Miroslaw Ferdynus ◽  
Hubert Debski ◽  
Sylwester Samborski
Keyword(s):  
Failure Analysis ◽  
Carrying Capacity ◽  
Composite Structures ◽  
Progressive Failure ◽  
Energy Criterion ◽  
Test Sample ◽  
Load Carrying Capacity ◽  
Progressive Failure Analysis ◽  
Load Carrying ◽  
Thin Walled

The subject of the presented research was a thin-walled composite column made of CFRP (carbon-epoxy laminate). The test sample had a top-hat cross-section with a symmetrical arrangement of laminate layers [90/−45/45/0]s. The composite structure was subjected to the process of axial compression. Experimental and numerical tests for the loss of stability and load-carrying capacity of the composite construction were carried out. The numerical buckling analysis was carried out based on the minimum potential energy criterion (based on the solution of an eigenvalue problem). The study of loss of load-carrying capacity was performed on the basis of a progressive failure analysis, solving the problem of non-linear stability based on Newton-Raphson’s incremental iterative method. Numerical results of critical and post-critical state were confronted with experimental research in order to estimate the vulnerable areas of the structure, showing areas prone to damage of the material.

Progressive failure analysis of thin-walled composite structures

2013 ◽  
Vol 95 ◽  
pp. 53-62 ◽  
Author(s):  
Diego Cárdenas ◽  
Hugo Elizalde ◽  
Piergiovanni Marzocca ◽  
Frank Abdi ◽  
Levon Minnetyan ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Composite Structures ◽  
Progressive Failure ◽  
Progressive Failure Analysis ◽  
Thin Walled

scholarly journals Stability and Load-Carrying Capacity of Thin-Walled FRP Composite Z-Profiles under Eccentric Compression

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2956
Author(s):  
Hubert Debski ◽  
Sylwester Samborski ◽  
Patryk Rozylo ◽  
Pawel Wysmulski
Keyword(s):  
Composite Material ◽  
Carrying Capacity ◽  
Progressive Failure ◽  
Compressive Load ◽  
Experimental Tests ◽  
Numerical Results ◽  
Load Carrying Capacity ◽  
Plastic Composite ◽  
Load Carrying ◽  
Thin Walled

This study investigates the effect of eccentric compressive load on the stability, critical states and load-carrying capacity of thin-walled composite Z-profiles. Short thin-walled columns made of carbon fiber-reinforced plastic composite material fabricated by the autoclave technique are examined. In experimental tests, the thin-walled structures were compressed until a loss of their load-carrying capacity was obtained. The test parameters were measured to describe the structure’s behavior, including the phenomenon of composite material failure. The post-critical load-displacement equilibrium paths and the acoustic emission signal enabling analysis of the composite material condition during the loading process were measured. The scope of the study also included performing numerical simulations by finite element method to solve the problem of non-linear stability and to describe the phenomenon of composite material damage based on the progressive failure model. The obtained numerical results showed a good agreement with the experimental characteristics of real structures. The numerical results are compared with the experimental findings to validate the developed numerical model.

scholarly journals Eigenproblem Versus the Load-Carrying Capacity of Hybrid Thin-Walled Columns with Open Cross-Sections in the Elastic Range

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3468
Author(s):  
Zbigniew Kolakowski ◽  
Andrzej Teter
Keyword(s):  
Cross Sections ◽  
Carrying Capacity ◽  
Ultimate Load ◽  
Equilibrium Path ◽  
Load Carrying Capacity ◽  
Nonlinear Buckling ◽  
Elastic Range ◽  
Load Carrying ◽  
Thin Walled ◽  
Ultimate Load Carrying Capacity

The phenomena that occur during compression of hybrid thin-walled columns with open cross-sections in the elastic range are discussed. Nonlinear buckling problems were solved within Koiter’s approximation theory. A multimodal approach was assumed to investigate an effect of symmetrical and anti-symmetrical buckling modes on the ultimate load-carrying capacity. Detailed simulations were carried out for freely supported columns with a C-section and a top-hat type section of medium lengths. The columns under analysis were made of two layers of isotropic materials characterized by various mechanical properties. The results attained were verified with the finite element method (FEM). The boundary conditions applied in the FEM allowed us to confirm the eigensolutions obtained within Koiter’s theory with very high accuracy. Nonlinear solutions comply within these two approaches for low and medium overloads. To trace the correctness of the solutions, the Riks algorithm, which allows for investigating unsteady paths, was used in the FEM. The results for the ultimate load-carrying capacity obtained within the FEM are higher than those attained with Koiter’s approximation method, but the leap takes place on the identical equilibrium path as the one determined from Koiter’s theory.

Sign in / Sign up

Export Citation Format

Share Document