scholarly journals Stability and Load-Carrying Capacity of Thin-Walled FRP Composite Z-Profiles under Eccentric Compression

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2956
Author(s):  
Hubert Debski ◽  
Sylwester Samborski ◽  
Patryk Rozylo ◽  
Pawel Wysmulski
Keyword(s):  
Composite Material ◽  
Carrying Capacity ◽  
Progressive Failure ◽  
Compressive Load ◽  
Experimental Tests ◽  
Numerical Results ◽  
Load Carrying Capacity ◽  
Plastic Composite ◽  
Load Carrying ◽  
Thin Walled

This study investigates the effect of eccentric compressive load on the stability, critical states and load-carrying capacity of thin-walled composite Z-profiles. Short thin-walled columns made of carbon fiber-reinforced plastic composite material fabricated by the autoclave technique are examined. In experimental tests, the thin-walled structures were compressed until a loss of their load-carrying capacity was obtained. The test parameters were measured to describe the structure’s behavior, including the phenomenon of composite material failure. The post-critical load-displacement equilibrium paths and the acoustic emission signal enabling analysis of the composite material condition during the loading process were measured. The scope of the study also included performing numerical simulations by finite element method to solve the problem of non-linear stability and to describe the phenomenon of composite material damage based on the progressive failure model. The obtained numerical results showed a good agreement with the experimental characteristics of real structures. The numerical results are compared with the experimental findings to validate the developed numerical model.

scholarly journals Progressive Failure Analysis of Thin-Walled Composite Structures Verified Experimentally

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1138 ◽  
Author(s):  
Patryk Rozylo ◽  
Miroslaw Ferdynus ◽  
Hubert Debski ◽  
Sylwester Samborski
Keyword(s):  
Failure Analysis ◽  
Carrying Capacity ◽  
Composite Structures ◽  
Progressive Failure ◽  
Energy Criterion ◽  
Test Sample ◽  
Load Carrying Capacity ◽  
Progressive Failure Analysis ◽  
Load Carrying ◽  
Thin Walled

The subject of the presented research was a thin-walled composite column made of CFRP (carbon-epoxy laminate). The test sample had a top-hat cross-section with a symmetrical arrangement of laminate layers [90/−45/45/0]s. The composite structure was subjected to the process of axial compression. Experimental and numerical tests for the loss of stability and load-carrying capacity of the composite construction were carried out. The numerical buckling analysis was carried out based on the minimum potential energy criterion (based on the solution of an eigenvalue problem). The study of loss of load-carrying capacity was performed on the basis of a progressive failure analysis, solving the problem of non-linear stability based on Newton-Raphson’s incremental iterative method. Numerical results of critical and post-critical state were confronted with experimental research in order to estimate the vulnerable areas of the structure, showing areas prone to damage of the material.

scholarly journals Eigenproblem Versus the Load-Carrying Capacity of Hybrid Thin-Walled Columns with Open Cross-Sections in the Elastic Range

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3468
Author(s):  
Zbigniew Kolakowski ◽  
Andrzej Teter
Keyword(s):  
Cross Sections ◽  
Carrying Capacity ◽  
Ultimate Load ◽  
Equilibrium Path ◽  
Load Carrying Capacity ◽  
Nonlinear Buckling ◽  
Elastic Range ◽  
Load Carrying ◽  
Thin Walled ◽  
Ultimate Load Carrying Capacity

The phenomena that occur during compression of hybrid thin-walled columns with open cross-sections in the elastic range are discussed. Nonlinear buckling problems were solved within Koiter’s approximation theory. A multimodal approach was assumed to investigate an effect of symmetrical and anti-symmetrical buckling modes on the ultimate load-carrying capacity. Detailed simulations were carried out for freely supported columns with a C-section and a top-hat type section of medium lengths. The columns under analysis were made of two layers of isotropic materials characterized by various mechanical properties. The results attained were verified with the finite element method (FEM). The boundary conditions applied in the FEM allowed us to confirm the eigensolutions obtained within Koiter’s theory with very high accuracy. Nonlinear solutions comply within these two approaches for low and medium overloads. To trace the correctness of the solutions, the Riks algorithm, which allows for investigating unsteady paths, was used in the FEM. The results for the ultimate load-carrying capacity obtained within the FEM are higher than those attained with Koiter’s approximation method, but the leap takes place on the identical equilibrium path as the one determined from Koiter’s theory.

Progressive Failure Analysis of an Integral Composite Joint for Thrust Reverser Cascade

2019 ◽  
Vol 795 ◽  
pp. 325-332
Author(s):  
Ji Shen Yang ◽  
Hong Yu Qi ◽  
Xiao Guang Yang ◽  
Duo Qi Shi
Keyword(s):  
Carrying Capacity ◽  
Composite Structure ◽  
Progressive Failure ◽  
Damage Model ◽  
Research Work ◽  
Failure Behavior ◽  
Load Carrying Capacity ◽  
Composite Joint ◽  
Bending Load ◽  
Load Carrying

The research work in this paper is focused on studying the failure behavior of an integral π-shaped laminated composite structure subjected to a bending load. A progressive damage model based on the 3D Tsai-Wu failure criterion and a developed gradual degradation model was employed to simulate and assess the load-carrying capacity, the onset and propagation of damage, and the failure mechanisms. For this unique π-shaped composite structure, disbonding was found to be the dominant damage mode under bending load, and the approximate maximum load could be maintained for a brief time during the final failure due to the gradual loss nature of the load-carrying capacity. The extent of damage was found to be more serious on the side of Rib II compared to the other side.

scholarly journals Performance of BFRP Retrofitted RCC Piles Subjected to Axial Loads

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Anandakumar Ramaswamy ◽  
Selvamony Chachithanantham ◽  
Seeni Arumugam
Keyword(s):  
Axial Compression ◽  
Carrying Capacity ◽  
Compressive Load ◽  
Load Carrying Capacity ◽  
Axial Loads ◽  
Basalt Fibre ◽  
Load Carrying ◽  
Fibre Reinforced Polymer ◽  
Strain Relationship ◽  
Axial Compression Experiment

This paper deals with the behaviour of basalt fibre reinforced polymer (BFRP) composites retrofitted RCC piles subjected to axial compression loads. Currently the awareness of using FRP increases rapidly in engineering fields and also among public. Retrofitting becomes vital for aged and damaged concrete structures, piles, and so forth, to improve its load carrying capacity and to extend the service life. The load carrying capacity of piles retrofitted with basalt unidirectional fabric was studied experimentally. 15 nos. of RCC end bearing pile elements were cast with same reinforcement for axial compression experiment. Three piles were used as conventional elements, another 3 piles were used as double BFRP wrapped pile elements, and remaining 9 piles were used as retrofitted piles with BFRP double wrapping after preloaded to 30%, 60%, and 90% of ultimate load of conventional element. The effects of retrofitting of RCC pile elements were observed and a mathematical prediction was developed for calculation of retrofitting strength. The stress vs. strain relationship curve, load vs. deformation curve, preloaded elements strength losses are tabulated and plotted. Besides, crack patterns of conventional elements and tearing BFRP wrapped elements were also observed. The BFRP wrapped elements and retrofitted elements withstand more axial compressive load than the conventional elements.

Geometric Imperfection Sensitivity and Effect of Constraint Conditions of H-Section Columns under Compression

2010 ◽  
Vol 102-104 ◽  
pp. 140-144
Author(s):  
Yi Ping Wang ◽  
Yong Zang ◽  
Di Ping Wu
Keyword(s):  
Carrying Capacity ◽  
Steel Structures ◽  
Load Carrying Capacity ◽  
Imperfection Sensitivity ◽  
Geometric Imperfection ◽  
Manufacture Process ◽  
Buckling Behavior ◽  
Load Carrying ◽  
Thin Walled ◽  
Tolerance Control

The buckling behavior of thin-walled steel structures under load is still imperfectly understood, in spite of much research over the past 50 years. In this paper, the buckling behaviors of H-section columns under compression have been simulated with ANSYS. In the analysis, contact pairs between column ends and end blocks have been introduced into the model, and the load carrying capacity of the columns with four kinds of end constraint conditions and various typical initial geometric imperfections has been calculated and discussed. The results indicate that the load carrying capacity is most sensitive to the flexural imperfection, and the constraint condition cannot change the imperfection sensitivity of a column under compression, but improving restrain condition can heighten the load carrying capacity. They are helpful to the use and the tolerance control in the manufacture process of thin-walled H-section steel structures.

Sign in / Sign up

Export Citation Format

Share Document