scholarly journals A Time Series Prediction Model of Foundation Pit Deformation Based on Empirical Wavelet Transform and NARX Network

Mathematics ◽  
2020 ◽  
Vol 8 (9) ◽  
pp. 1535
Author(s):  
Qingwen Ma ◽  
Sihan Liu ◽  
Xinyu Fan ◽  
Chen Chai ◽  
Yangyang Wang ◽  
...  
Keyword(s):  
Wavelet Transform ◽  
Prediction Model ◽  
Mean Square Error ◽  
External Input ◽  
Mean Square ◽  
Foundation Pit ◽  
Empirical Wavelet Transform ◽  
The Mean ◽  
Nonlinear Autoregressive ◽  
Narx Model

Large deep foundation pits are usually in a complex environment, so their surface deformation tends to show a stable rising trend with a small range of fluctuation, which brings certain difficulty to the prediction work. Therefore, in this study we proposed a nonlinear autoregressive exogenous (NARX) prediction method based on empirical wavelet transform (EWT) pretreatment is proposed for this feature. Firstly, EWT is used to conduct adaptive decomposition of the measured deformation data and extract the modal signal components with characteristic differences. Secondly, the main components affecting the deformation of the foundation pit are analyzed as a part of the external input. Then, we established a NARX prediction model for different components. Finally, all predicted values are superpositioned to obtain a total value, and the result is compared with the predicted results of the nonlinear autoregressive (NAR) model, empirical mode decomposition-nonlinear autoregressive (EMD-NAR) model, EWT-NAR model, NARX model, EMD-NARX model and EWT-NARX model. The results showed that, compared with the EWT-NAR and EWT-NARX models, the EWT-NARX model reduced the mean square error of KD25 by 91.35%, indicating that the feature of introducing external input makes NARX more suitable for combining with the EWT method. Meanwhile, compared with the EMD-NAR and EWT-NAR models, the introduction of the NARX model reduced the mean square error of KD25 by 78.58% and 95.71%, indicating that EWT had better modal decomposition capability than EMD.

scholarly journals Financial Time Series Image Algorithm Based on Wavelet Analysis and Data Fusion

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Wuwei Liu ◽  
Jingdong Yan
Keyword(s):  
Time Series ◽  
Wavelet Transform ◽  
Mean Square Error ◽  
Financial Time Series ◽  
Prediction Method ◽  
Mean Square ◽  
Rbf Network ◽  
Network Prediction ◽  
The Mean ◽  
Hidden Layer

In recent years, people are more and more interested in time series modeling and its application in prediction. This paper mainly discusses a financial time series image algorithm based on wavelet analysis and data fusion. In this research, we conducted an in-depth study on the scale decomposition sequence and wavelet transform sequence in different scale domains of wavelet transform according to the scale change rule based on wavelet transform. We use wavelet neural network with different input neurons and hidden neurons to predict, respectively. Finally, the prediction results are integrated into the final prediction results based on the original time series by using wavelet reconstruction technology. Using RBF algorithm in neural network and SPSS Clementine, the wavelet transform sequences on five scales are modeled. Each network model has three layers: one input layer, one hidden layer, and one output layer, and each output layer has only one output element. In order to compare the prediction effect of the model proposed in this study, the ordinary RBF network is used to model and predict the log yield itself. When the input sample is 5, the minimum mean square error is obtained when the hidden layer is 6, and the mean square error is 1.6349. The mean square error of the training phase is 0.0209, and the validation error is 1.6141. The results show that the prediction results of the wavelet prediction method combined with the RBF network prediction method are better than those of wavelet prediction or RBF network prediction.

NIR-Based Wood Water Content Prediction with an Integration of ANN and PCA

2012 ◽  
Vol 502 ◽  
pp. 253-257 ◽  
Author(s):  
Pai Li ◽  
Yao Xiang Li
Keyword(s):  
Neural Network ◽  
Prediction Model ◽  
Water Content ◽  
Mean Square Error ◽  
Principal Components ◽  
Bp Neural Network ◽  
Cross Validation ◽  
Scatter Correction ◽  
Mean Square ◽  
The Mean

In this paper, an integration of BP neural network and PCA for modeling wood water content of larch combined with NIRS was investigated. The original spectra were collected and pretreated with 9 point smoothing and multiplicative scatter correction (MSC). Five typical principal components were extracted from PCA with the application of establishing prediction model. Full cross-validation approach was applied to achieve desirable modeling performance. The prediction correlation coefficient (R) was 0.952 while the mean square error of prediction (MSEP) was 38.27. This study indicated that NIR is a useful tool for rapid and accurate prediction of wood water content.

The Bordeaux Automatic Meridian Circle

1978 ◽  
Vol 48 ◽  
pp. 227-228
Author(s):  
Y. Requième
Keyword(s):  
Mean Square Error ◽  
Mean Square ◽  
Meridian Circle ◽  
The Mean ◽  
Full Automation

In spite of important delays in the initial planning, the full automation of the Bordeaux meridian circle is progressing well and will be ready for regular observations by the middle of the next year. It is expected that the mean square error for one observation will be about ±0.”10 in the two coordinates for declinations up to 87°.

Limit tolerances for sums of measurement errors

2018 ◽  
Vol 934 (4) ◽  
pp. 59-62
Author(s):  
V.I. Salnikov
Keyword(s):  
Normal Distribution ◽  
Mean Square Error ◽  
Gaussian Distribution ◽  
Measurement Errors ◽  
Theory And Practice ◽  
Mean Square ◽  
The Mean ◽  
Limiting Values ◽  
Limiting Value

The question of calculating the limiting values of residuals in geodesic constructions is considered in the case when the limiting value for measurement errors is assumed equal to 3m, ie ∆рred = 3m, where m is the mean square error of the measurement. Larger errors are rejected. At present, the limiting value for the residual is calculated by the formula 3m√n, where n is the number of measurements. The article draws attention to two contradictions between theory and practice arising from the use of this formula. First, the formula is derived from the classical law of the normal Gaussian distribution, and it is applied to the truncated law of the normal distribution. And, secondly, as shown in [1], when ∆рred = 2m, the sums of errors naturally take the value equal to ?pred, after which the number of errors in the sum starts anew. This article establishes its validity for ∆рred = 3m. A table of comparative values of the tolerances valid and recommended for more stringent ones is given. The article gives a graph of applied and recommended tolerances for ∆рred = 3m.

scholarly journals IndoorPlant: A Model for Intelligent Services in Indoor Agriculture Based on Context Histories

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1631
Author(s):  
Bruno Guilherme Martini ◽  
Gilson Augusto Helfer ◽  
Jorge Luis Victória Barbosa ◽  
Regina Célia Espinosa Modolo ◽  
Marcio Rosa da Silva ◽  
...  
Keyword(s):  
Technology Acceptance ◽  
Mean Square Error ◽  
Ease Of Use ◽  
Coefficient Of Determination ◽  
Square Root ◽  
Mean Square ◽  
Use Context ◽  
The Mean ◽  
Acceptance Model ◽  
The Internet Of Things

The application of ubiquitous computing has increased in recent years, especially due to the development of technologies such as mobile computing, more accurate sensors, and specific protocols for the Internet of Things (IoT). One of the trends in this area of research is the use of context awareness. In agriculture, the context involves the environment, for example, the conditions found inside a greenhouse. Recently, a series of studies have proposed the use of sensors to monitor production and/or the use of cameras to obtain information about cultivation, providing data, reminders, and alerts to farmers. This article proposes a computational model for indoor agriculture called IndoorPlant. The model uses the analysis of context histories to provide intelligent generic services, such as predicting productivity, indicating problems that cultivation may suffer, and giving suggestions for improvements in greenhouse parameters. IndoorPlant was tested in three scenarios of the daily life of farmers with hydroponic production data that were obtained during seven months of cultivation of radicchio, lettuce, and arugula. Finally, the article presents the results obtained through intelligent services that use context histories. The scenarios used services to recommend improvements in cultivation, profiles and, finally, prediction of the cultivation time of radicchio, lettuce, and arugula using the partial least squares (PLS) regression technique. The prediction results were relevant since the following values were obtained: 0.96 (R2, coefficient of determination), 1.06 (RMSEC, square root of the mean square error of calibration), and 1.94 (RMSECV, square root of the mean square error of cross validation) for radicchio; 0.95 (R2), 1.37 (RMSEC), and 3.31 (RMSECV) for lettuce; 0.93 (R2), 1.10 (RMSEC), and 1.89 (RMSECV) for arugula. Eight farmers with different functions on the farm filled out a survey based on the technology acceptance model (TAM). The results showed 92% acceptance regarding utility and 98% acceptance for ease of use.

Burst Erasures and the Mean-Square Error for Cyclic Parseval Frames

2011 ◽  
Vol 57 (7) ◽  
pp. 4622-4635 ◽  
Author(s):  
Bernhard G. Bodmann ◽  
Pankaj K. Singh
Keyword(s):  
Mean Square Error ◽  
Mean Square ◽  
Parseval Frames ◽  
The Mean

A MODIFIED RATIO TYPE ESTIMATOR OF FINITE POPULATION MEAN UNDER STRATIFIED RANDOM SAMPLING SCHEME

2021 ◽  
pp. 58-60
Author(s):  
Naziru Fadisanku Haruna ◽  
Ran Vijay Kumar Singh ◽  
Samsudeen Dahiru
Keyword(s):  
Mean Square Error ◽  
Random Sampling ◽  
Minimum Mean Square Error ◽  
Real Life ◽  
Population Data ◽  
Auxiliary Variable ◽  
Mean Square ◽  
Data Set ◽  
Population Mean ◽  
The Mean

In This paper a modied ratio-type estimator for nite population mean under stratied random sampling using single auxiliary variable has been proposed. The expression for mean square error and bias of the proposed estimator are derived up to the rst order of approximation. The expression for minimum mean square error of proposed estimator is also obtained. The mean square error the proposed estimator is compared with other existing estimators theoretically and condition are obtained under which proposed estimator performed better. A real life population data set has been considered to compare the efciency of the proposed estimator numerically.

scholarly journals Comparing plastic syringes and disposable columns to extract n-alkanes in forage and concentrate feeds

2010 ◽  
Vol 40 (8) ◽  
pp. 1844-1847 ◽  
Author(s):  
Dimas Estrasulas de Oliveira ◽  
Luis Orlindo Tedeschi
Keyword(s):  
Gas Chromatography ◽  
Linear Regression ◽  
Mean Square Error ◽  
Carbon Chain ◽  
Carbon Chain Length ◽  
Square Root ◽  
Mean Square ◽  
Alternative Material ◽  
The Mean ◽  
Disposable Plastic

Saturated aliphatic hydrocarbons (n-alkanes) were extracted from feed, orts, and bovine fecal samples using disposable, plastic 5mL-syringes as an alternative material to disposable columns, which are normally used in the liquid-solid extraction phase of n-alkanes. For both methods, the n-alkane extracts (carbon chain length between 31 and 36 atoms) were identified using gas chromatography. The linear regression between methods were: 1) feces: column Alkane=2.63+0.92×syringeAlkane [r²=0.94, square root of the mean square error (RMSE)=13.7mg kg-1, n=30] from which the intercept and the slope did not simultaneously differ from zero and unity (P>0.05), respectively; 2) feeds: column Alkane=0.36+1.12×syringeAlkane (r²=0.85, RMSE=1.9mg kg-1, n=21) from which the intercept and the slope did not simultaneously differ from zero and unity (P>0.05), respectively; 3) orts: column Alkane=0.49+0.92×syringeAlkane (r²=0.98, RMSE=1.2mg kg-1, n=15) from which the intercept and the slope did not simultaneously differ from zero and unity (P>0.05), respectively. Materials with low concentration of n-alkanes may affect the values obtained in both methods. These results suggested that disposable plastic syringes might be a viable alternative to columns thus, reducing analytical costs.

Sign in / Sign up

Export Citation Format

Share Document